impact-logger.ko 8.74 KB
Newer Older
Sam Calisch's avatar
Sam Calisch committed
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246
from koko.lib.pcb import *
from koko.lib.sam import *

class TagConnectPDI(Component):
    '''
    '''
    _pad = s2d.circle(0,0,.5*.031)
    _via = s2d.circle(0,0,.5*.039)
    pins = [
        Pin(-.05,-.025,_pad,'CLK',label_size=.02),
        Pin( .00,-.025,_pad,'NC',label_size=.02),
        Pin( .05,-.025,_pad,'DAT',label_size=.02),
        Pin(-.05,.025,_pad,'VCC',label_size=.02),
        Pin( .00,.025,_pad,'NC',label_size=.02),
        Pin( .05,.025,_pad,'GND',label_size=.02)
    ]
    vias = [
        Via(-.1,0,_via),
        Via(.1,0.04,_via),
        Via(.1,-.04,_via),

    ]

def bot_chamfered_rectangle(x0,x1,y0,y1,c):
    r = rectangle(x0,x1,y0,y1)
    c1 = triangle(x0,y0,x0,y0+c,x0+c,y0)
    c2 = triangle(x1,y1, x1, y1-c, x1-c, y1)
    c3 = triangle(x0,y1, x0+c, y1, x0, y1-c)
    c4 = triangle(x1,y0, x1-c, y0, x1, y0+c)
    return r-c2-c3

class cap_UWT(Component):
    '''UWT series aluminum smd cap
    http://nichicon-us.com/english/products/pdfs/e-uwt.pdf
    '''
    _d = 8 #mm, diameter
    _h = 10.5 #mm, height
    _a = 2.9/25.4
    _e = 3.1/25.4
    _h = 1./25.4 + 2/25.4
    _pad = rectangle(-_h/2,_h/2,-_a/2-.03,_a/2+.03)
    pins = [Pin(0,-(_e+_a)/2-.01,_pad,'-'),Pin(0,(_e+_a)/2+.01,_pad,'+')]
    vias = []
    shadow = bot_chamfered_rectangle(-4/25.4,4/25.4,-4/25.4,4/25.4,1/25.4)

class CR20XX(Component):
    #coin cell battery, e.g. 2032
    pins = [
        Pin(0,0,circle(0,0,5./25.4),'-')
    ]
    shadow = circle(0,0,10./25.4)
    vias = []

class AAA(Component):
    #AAA battery smd holder
    pad = rectangle(-.125,.125,-.1,.1)
    pins = [
        Pin(1.21-.125,0,pad,'+',label_size=.08),
        Pin(-1.21+.125,0,pad,'-',label_size=.08),
    ]
    shadow = rectangle(-1.07,1.07,-.25,.25)
    vias = [
        Via(-1.21+.25,.209,circle(0,0,.039))
    ]

class ATxmegaE5(Component):
    _padh = chamfered_rectangle(-.025,.025,-.007,.007,.002)
    _padv = chamfered_rectangle(-.007,.007,-.025,.025,.002)
    c=.18
    d = 0.8/25.4
    names = [
        '1 GND','PA4','PA3','PA2','PA1','PA0','PDI/DATA','RST/CLK',
        'PC7','PC6','PC5','PC4','PC3','PC2','PC1','PC0',
        'VCC','GND','PR1','PR0','PD7','PD6','PD5','PD4',
        'PD3','PD2','PD1','PD0','PA7','PA6','PA5','AVCC'
    ]
    pins = [Pin(-c,(3.5-i)*d,_padh,n,label_size=.025) for i,n in enumerate(names[:8])]
    pins += [Pin((-3.5+i)*d,-c,_padv,n,label_size=.025,label_rot=-90) for i,n in enumerate(names[8:16])]
    pins += [Pin(c,(-3.5+i)*d,_padh,n,label_size=.025) for i,n in enumerate(names[16:24])]
    pins += [Pin((3.5-i)*d,c,_padv,n,label_size=.025,label_rot=-90) for i,n in enumerate(names[24:])]
    vias = []
    shadow = rectangle(-c+d,c-d,-c+d,c-d)

class ATxmega16A4U(Component):
    _padh = chamfered_rectangle(-.024,.024,-.007,.007,.003)
    _padv = chamfered_rectangle(-.007,.007,-.024,.024,.003)
    c= 11/25.4/2.
    d = 0.8/25.4
    names = [
        'PA5','PA6','PA7','PB0','PB1','PB2','PB3','GND','VCC','PC0','PC1',
        'PC2','PC3','PC4','PC5','PC6','PC7','GND2','VCC2','PD0','PD1','PD2',
        'PD3','PD4','PD5','PD6','PD7','PE0','PE1','GND3','VCC3','PE2','PE3',
        'PDI/DATA','RST/CLK','PR0','PR1','GND4','AVCC','PA0','PA1','PA2','PA3','PA4'
    ]
    n_side = 11
    pins = [Pin(-c,(5-i)*d,_padh,n,label_size=.025) for i,n in enumerate(names[:n_side])]
    pins += [Pin((-5+i)*d,-c,_padv,n,label_size=.025,label_rot=-90) for i,n in enumerate(names[n_side:2*n_side])]
    pins += [Pin(c,(-5+i)*d,_padh,n,label_size=.025) for i,n in enumerate(names[2*n_side:3*n_side])]
    pins += [Pin((5-i)*d,c,_padv,n,label_size=.025,label_rot=-90) for i,n in enumerate(names[3*n_side:])]
    vias = []
    shadow = rectangle(-c+d,c-d,-c+d,c-d)

class ADXL372Z_EVAL(Component):
    names = ['VS','VIO','GND','INT2','INT1','CS','MISO','MOSI','SCLK','GND']
    w = .3
    pad = rectangle(-.05,.05,-.03,.03)
    pins = [Pin(-.5*w, .2-.1*i,pad,names[i]) for i in range(5)]
    pins += [Pin(.5*w,-.2+.1*i,pad,names[i+5]) for i in range(5)]
    vias = [
        Via(7.5/25.4,7.5/25.4,circle(0,0,.055)),
        Via(-7.5/25.4,7.5/25.4,circle(0,0,.055)),
        Via(7.5/25.4,-7.5/25.4,circle(0,0,.055)),
        Via(-7.5/25.4,-7.5/25.4,circle(0,0,.055))
    ]
    shadow = filleted_rectangle(-.405,.405,-.405,.405,.05)

class micro_sd_card(Component):
    #molex WM12834CT-ND
    names = ['X','CS','DI','VDD','CLK','VSS','DO','X']
    pad = rectangle(-.62/25.4,.62/25.4,-.4/25.4,.4/25.4)
    pitch = 1.1/25.4
    pins = [ Pin(.62/25.4, 4.82/25.4+pitch*i, pad,names[i],label_size=.02) for i in range(8) ]
    pins += [
        Pin( 1.24/25.4,.48/25.4,rectangle(-1.25/25.4,1.25/25.4,-.48/25.4,.48/25.4)),
        Pin( 1.1/25.4,14.84/25.4,rectangle(-1.1/25.4,1.1/25.4,-.6/25.4,.6/25.4)),
        Pin(12.58/25.4,.58/25.4, rectangle(-1.1/25.4,1.1/25.4,-.58/25.4,.58/25.4)),
        Pin(13.95/25.4-.62/25.4,4.88/25.4,rectangle(-.55/25.4,.55/25.4,-.75/25.4,.75/25.4)),
        Pin(13.95/25.4-.62/25.4,12.66/25.4,rectangle(-.55/25.4,.55/25.4,-.75/25.4,.75/25.4))
    ]
    vias = []
    w = 13.95/25.4; h = 15.44/25.4
    shadow = rectangle(-1.25/25.4,  w, 0., h)
    pins = [Pin(p.x-.5*w,p.y-.5*h,p.shape,p.name) for p in pins]
    shadow = move(shadow,-.5*w,-.5*h)


class Hole(Component):
    pins = [Pin(0,0,circle(0,0,0.01))]
    vias = [Via(0,0,circle(0,0,.5*2.1/25.4))]
    tap = circle(0,0,.5*1.9/25.5)


width = 1.5
height = 1.
pcb = PCB(0,0,width,height,chamfer_distance=.05)

board = circle(0,0,1.5)
holes = circle(0,1.5-.25,2.1/25.4)
holes += rotate(holes,120) + rotate(holes,-120)
pcb.custom_cutout = board-holes


def connectG(pin,dx,dy,width=.014):
    '''
    Convenience function for connecting to ground plane
    '''
    pcb.connectD(pin,[pin.x+dx,pin.y+dy],[pin.x+dx-.0001,pin.y+dy],width=width,sides=[0,1,1])
def connectS(pin,dx,dy,width=.014):
    pcb.connectD(pin,[pin.x+dx+.0001,pin.y+dy],width=width)
def connectM(pin1,pin2,dx,width=.014):
    pcb.connectD(pin1,[pin1.x+dx,pin1.y],pin2,width=width)

#pcb.custom_cutout = chamfered_rectangle(0,width,.5*height-.25,.5*height+.25,.05)
#pcb.custom_cutout += chamfered_rectangle(0,.6*width,0,height,.12)


xmega = ATxmega16A4U(-1.2,-.0,0,'Xmega\nA4U')
pcb += xmega

pdi = TagConnectPDI(xmega.x+.11,xmega.y+.35,0)
pcb += pdi


pcb.connectV(xmega['RST/CLK'],[pdi['CLK'].x,pdi['CLK'].y-.05],pdi['CLK'],width=.014)

#connectG(xmega['1 GND'],-.03,.05)
#connectG(xmega['GND'],.07,.05)

pcb.connectD(xmega['PDI/DATA'],pdi['DAT'],width=.014)


R1 = R_0805(pdi.x-.18,pdi.y,90,'R1\n10k',label_size=.03)
pcb += R1
C1 = C_0805(R1.x-.07,R1.y,90,'C1\n1uF',label_size=.03)
pcb += C1
C2 = C_0805(C1.x-.07,C1.y,90,'C2\n.1uF',label_size=.03)
pcb += C2
#pcb.connectD(xmega['1 GND'],[xmega['1 GND'].x-.03,xmega['1 GND'].y-.04],[C2[0].x-.14,C2[0].y+.1],C2[0],width=.014)


pcb.connectD(pdi['GND'],[pdi['GND'].x,pdi['GND'].y+.05],[C1[0].x+.02,C1[0].y+.05],C1[0])
pcb.connectD(pdi['GND'],[pdi['GND'].x,pdi['GND'].y+.05],[C2[0].x+.02,C2[0].y+.05],C2[0])
#pcb.connectH(pdi['GND'],C2[0])
#pcb.connectV(pdi['VCC'],C1[1])
#pcb.connectV(pdi['VCC'],C2[1])

pcb.connectH(xmega['RST/CLK'],[xmega['RST/CLK'].x,xmega['RST/CLK'].y+.06],R1[1],width=.014)
pcb.connectD(pdi['VCC'],[pdi['VCC'].x-.03,pdi['VCC'].y+.01],R1[0],width=.014)
#pcb.connectD(xmega['AVCC'],[xmega['AVCC'].x+.188,xmega['AVCC'].y-.1],xmega['PC5'],R1[0],width=.014)

#pcb.connectD(xmega['VCC'],[xmega.x-.105,xmega.y-.05],xmega['AVCC'],width=.014)



#SPI to microsd card
sd = micro_sd_card(0,-1.1,-90,'MICRO SD')
pcb += sd

#ADXL372
adxl = ADXL372Z_EVAL(0,0,180,'adxl372')
pcb += adxl

pcb.connectD(xmega['PD4'],[xmega['PD4'].x+.14,xmega['PD4'].y],adxl['CS'],width=.014)
pcb.connectD(xmega['PD5'],[xmega['PD5'].x+.12,xmega['PD5'].y],adxl['MOSI'],width=.014)
pcb.connectD(xmega['PD6'],[xmega['PD6'].x+.10,xmega['PD6'].y],adxl['MISO'],width=.014)
pcb.connectD(xmega['PD7'],[xmega['PD7'].x+.08,xmega['PD7'].y],adxl['SCLK'],width=.014)

pcb.connectD(xmega['PC4'],[xmega['PC4'].x,xmega['PC4'].y-.18],[xmega['PC4'].x+.3,xmega['PC4'].y-.25],[sd['CS'].x,sd['CS'].y+.05],sd['CS'],width=.014)
pcb.connectD(xmega['PC5'],[xmega['PC5'].x,xmega['PC5'].y-.15],[xmega['PC5'].x+.3,xmega['PC5'].y-.2],[sd['DI'].x,sd['DI'].y+.1],sd['DI'],width=.014)
pcb.connectD(xmega['PC6'],[xmega['PC6'].x,xmega['PC6'].y-.12],[xmega['PC6'].x+.3,xmega['PC6'].y-.15],[sd['DO'].x,sd['DO'].y+.2],sd['DO'],width=.014)
pcb.connectD(xmega['PC7'],[xmega['PC7'].x,xmega['PC7'].y-.09],[xmega['PC7'].x+.3,xmega['PC7'].y-.11],[sd['CLK'].x,sd['CLK'].y+.15],sd['CLK'],width=.014)


#battery
#batt = CR20XX(xmega.x,xmega.y-.5,0,"CR2032")
#pcb += batt

batt1 = AAA(-.7,0,90,'AAA1')
pcb += batt1
batt2 = AAA(.7,0,-90,'AAA2')
pcb += batt2

C_batt = cap_UWT(0,.8,90,'100uF')
pcb += C_batt
pcb.connectD(C_batt['+'],batt1['+'],width=.05)
pcb.connectD(C_batt['-'],batt2['-'],width=.05)

#soldering tails




cad.shapes = pcb.layout()
#cad.shape = pcb.traces+(pcb.cutout-pcb.cutout)
#cad.shape = pcb.cutout+(pcb.traces-pcb.traces)
#cad.shape = pcb.custom_layers['wj']['layer']