Commit 277a34d8 authored by Sam Calisch's avatar Sam Calisch
Browse files


parent 3b8475c4
Pipeline #2936 passed with stage
in 3 seconds
......@@ -2,6 +2,8 @@
## Overview
This project is to make planar speakers by plotting fine magnet wire on a membrane, instead of the usual voice-coil and cone construction. The resulting speakers will be low profile, low mass, and (hopefully) high performance. It's my hope that by reducing the relevant design degrees of freedom (the path of the coils, the arrangement of permanent magnets) we can design the geometry and actuation of sound systems as a whole, rather than as assemblages of individually optimized components.
<img src= "img/speaker-microscope.jpg" height=400px>
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment