README.md 1.28 KB
Newer Older
Sam Calisch's avatar
Sam Calisch committed
1 2
# zundscope

Sam Calisch's avatar
Sam Calisch committed
3 4
zund usb microscope tool with wifi streaming

Sam Calisch's avatar
Sam Calisch committed
5 6 7 8
<img src='img/UDT_corner-2.jpg' height=300px>
<img src='img/UDT_corner.jpg' height=300px>


Sam Calisch's avatar
Sam Calisch committed
9
## Connecting to the scope
Sam Calisch's avatar
Sam Calisch committed
10 11 12 13 14 15 16 17 18 19

1. Add power through USB battery (remember to push the button)
2. Give Linux about ~60 seconds to start up.
3. Join the "Zundtastic" wifi network from any nearby computer. 
4. Open a terminal and log into the tool: `ssh pi@192.168.4.1`
5. Start the webcam server: `/usr/local/bin/mjpg_streamer -i "/usr/local/lib/mjpg-streamer/input_uvc.so -n -f 15 -r 1920x1080" -o "/usr/local/lib/mjpg-streamer/output_http.so -p 8080 -w /usr/local/www"`
6. Open a web browser and go to `http://192.168.4.1:8080/target.html` to view the stream.
7. When you are ready to shut down the scope, from the terminal run `sudo shutdown now`
8. Unplug the battery.

Sam Calisch's avatar
Sam Calisch committed
20
## Building the scope
Sam Calisch's avatar
Sam Calisch committed
21

Sam Calisch's avatar
Sam Calisch committed
22 23 24
### 3D models to print

The main body, with supports for 3D printing is available <a href='model/zundscope_with_supports.stl'>here</a>.
Sam Calisch's avatar
Sam Calisch committed
25 26 27

### Assembly

Sam Calisch's avatar
Sam Calisch committed
28 29
TODO

Sam Calisch's avatar
Sam Calisch committed
30 31
### Alignment

Sam Calisch's avatar
Sam Calisch committed
32 33
TODO

Sam Calisch's avatar
Sam Calisch committed
34 35 36 37 38

## TODO

1. Make a startup service that starts the webcam server.  Need to issue the shutdown command via the webpage to avoid potential corruption of SD card.
2. Would be great to adjust field of view without disassembling the scope.  Maybe as simple as an access hole for adjusting knob.