Commit 6646490d authored by Erik Strand's avatar Erik Strand

Finish 3d printing and scanning page

parent 4621de59
......@@ -32,7 +32,20 @@ beams.
### Fabrication
This design was printed on CBA's Stratasys Eden printer in a translucent plastic.
My design was brought to life by CBA's Stratasys Eden printer, using a translucent plastic.
![](/img/05_print_1.jpg#c)
(The indentations on the ends of some of the spires are my fault, not the printer's. The part lasted about 10 minutes before I dropped it.)
The way this material transmits and diffuses light is quite nice. With the right lighting, it almost looks like ice.
![](/img/05_print_2.jpg#c)
The layers aren't noticeable from afar, but they are quite apparent up close.
![](/img/05_print_3.jpg#c)
## Scanning
......@@ -41,3 +54,5 @@ candidate for 3d scanning. Which is exactly why I wanted to try it.
Results were... as expected.
![](/img/05_scan.jpg#c)
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment