Endpoint.h 56.3 KB
Newer Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
/*
             LUFA Library
     Copyright (C) Dean Camera, 2009.
              
  dean [at] fourwalledcubicle [dot] com
      www.fourwalledcubicle.com
*/

/*
  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)

  Permission to use, copy, modify, and distribute this software
  and its documentation for any purpose and without fee is hereby
  granted, provided that the above copyright notice appear in all
  copies and that both that the copyright notice and this
  permission notice and warranty disclaimer appear in supporting
  documentation, and that the name of the author not be used in
  advertising or publicity pertaining to distribution of the
  software without specific, written prior permission.

  The author disclaim all warranties with regard to this
  software, including all implied warranties of merchantability
  and fitness.  In no event shall the author be liable for any
  special, indirect or consequential damages or any damages
  whatsoever resulting from loss of use, data or profits, whether
  in an action of contract, negligence or other tortious action,
  arising out of or in connection with the use or performance of
  this software.
*/

31
32
/** \ingroup Group_USB
 *  @defgroup Group_EndpointManagement Endpoint Management
33
34
35
 *
 *  Functions, macros and enums related to endpoint management when in USB Device mode. This
 *  module contains the endpoint management macros, as well as endpoint interrupt and data
36
 *  send/receive functions for various data types.
37
38
39
40
41
42
43
44
 *
 *  @{
 */

/** @defgroup Group_EndpointRW Endpoint Data Reading and Writing
 *
 *  Functions, macros, variables, enums and types related to data reading and writing from and to endpoints.
 */
45
 
46
47
48
49
50
51
52
53
54
55
56
57
58
59
/** \ingroup Group_EndpointRW  
 *  @defgroup Group_EndpointPrimitiveRW Read/Write of Primitive Data Types
 *
 *  Functions, macros, variables, enums and types related to data reading and writing of primitive data types
 *  from and to endpoints.
 */ 

/** \ingroup Group_EndpointRW  
 *  @defgroup Group_EndpointStreamRW Read/Write of Multi-Byte Streams
 *
 *  Functions, macros, variables, enums and types related to data reading and writing of data streams from
 *  and to endpoints.
 */ 

60
61
62
63
64
/** @defgroup Group_EndpointPacketManagement Endpoint Packet Management
 *
 *  Functions, macros, variables, enums and types related to packet management of endpoints.
 */

65
66
67
68
69
#ifndef __ENDPOINT_H__
#define __ENDPOINT_H__

	/* Includes: */
		#include <avr/io.h>
70
71
		#include <avr/pgmspace.h>
		#include <avr/eeprom.h>
72
73
74
75
76
77
		#include <stdbool.h>

		#include "../../../Common/Common.h"
		#include "../HighLevel/USBTask.h"

		#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
78
			#include "../HighLevel/StreamCallbacks.h"
79
		#endif
80
		
81
82
83
84
85
86
87
	/* Enable C linkage for C++ Compilers: */
		#if defined(__cplusplus)
			extern "C" {
		#endif

	/* Public Interface - May be used in end-application: */
		/* Macros: */
88
			/** Endpoint data direction mask for \ref Endpoint_ConfigureEndpoint(). This indicates that the endpoint
89
90
			 *  should be initialized in the OUT direction - i.e. data flows from host to device.
			 */
91
			#define ENDPOINT_DIR_OUT                      (0 << EPDIR)
92

93
			/** Endpoint data direction mask for \ref Endpoint_ConfigureEndpoint(). This indicates that the endpoint
94
95
			 *  should be initialized in the IN direction - i.e. data flows from device to host.
			 */
96
			#define ENDPOINT_DIR_IN                       (1 << EPDIR)
97

98
			/** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates
99
100
101
102
			 *  that the endpoint should have one single bank, which requires less USB FIFO memory but results
			 *  in slower transfers as only one USB device (the AVR or the host) can access the endpoint's
			 *  bank at the one time.
			 */
103
			#define ENDPOINT_BANK_SINGLE                  (0 << EPBK0)
104

105
			/** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates
106
107
108
109
			 *  that the endpoint should have two banks, which requires more USB FIFO memory but results
			 *  in faster transfers as one USB device (the AVR or the host) can access one bank while the other
			 *  accesses the second bank.
			 */
110
			#define ENDPOINT_BANK_DOUBLE                  (1 << EPBK0)
111
112
113
114
			
			/** Endpoint address for the default control endpoint, which always resides in address 0. This is
			 *  defined for convenience to give more readable code when used with the endpoint macros.
			 */
115
			#define ENDPOINT_CONTROLEP                    0
116
117

			#if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__))
118
119
120
				/** Default size of the default control endpoint's bank, until altered by the Endpoint0Size value 
				 *  in the device descriptor. Not available if the FIXED_CONTROL_ENDPOINT_SIZE token is defined.
				 */
121
				#define ENDPOINT_CONTROLEP_DEFAULT_SIZE   8
122
123
124
125
126
			#endif
			
			/** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's
			 *  numerical address in the device.
			 */
127
			#define ENDPOINT_EPNUM_MASK                   0x07
128
129
130
131

			/** Endpoint bank size mask, for masking against endpoint addresses to retrieve the endpoint's
			 *  bank size in the device.
			 */
132
			#define ENDPOINT_EPSIZE_MASK                  0x7FF
133
134
135
			
			/** Maximum size in bytes of a given endpoint.
			 *
136
			 *  \param[in] n  Endpoint number, a value between 0 and (ENDPOINT_TOTAL_ENDPOINTS - 1)
137
			 */				
138
			#define ENDPOINT_MAX_SIZE(n)                  _ENDPOINT_GET_MAXSIZE(n)
139
140
141

			/** Indicates if the given endpoint supports double banking.
			 *
142
			 *  \param[in] n  Endpoint number, a value between 0 and (ENDPOINT_TOTAL_ENDPOINTS - 1)
143
			 */				
144
			#define ENDPOINT_DOUBLEBANK_SUPPORTED(n)      _ENDPOINT_GET_DOUBLEBANK(n)
145

146
			#if !defined(CONTROL_ONLY_DEVICE)
147
				#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)
148
149
150
151
152
153
154
155
					/** Total number of endpoints (including the default control endpoint at address 0) which may
					 *  be used in the device. Different USB AVR models support different amounts of endpoints,
					 *  this value reflects the maximum number of endpoints for the currently selected AVR model.
					 */
					#define ENDPOINT_TOTAL_ENDPOINTS          7
				#else
					#define ENDPOINT_TOTAL_ENDPOINTS          5			
				#endif
156
			#else
157
				#define ENDPOINT_TOTAL_ENDPOINTS              1
158
159
			#endif
			
160
		/* Pseudo-Function Macros: */
161
162
163
164
165
166
167
168
169
170
171
			#if defined(__DOXYGEN__)
				/** Indicates the number of bytes currently stored in the current endpoint's selected bank.
				 *
				 *  \note The return width of this function may differ, depending on the maximum endpoint bank size
				 *        of the selected AVR model.
				 *
				 *  \ingroup Group_EndpointRW
				 *
				 *  \return Total number of bytes in the currently selected Endpoint's FIFO buffer
				 */
				static inline uint16_t Endpoint_BytesInEndpoint(void);
172
			
173
174
175
176
177
178
179
180
181
				/** Get the endpoint address of the currently selected endpoint. This is typically used to save
				 *  the currently selected endpoint number so that it can be restored after another endpoint has
				 *  been manipulated.
				 *
				 *  \return Index of the currently selected endpoint
				 */
				static inline uint8_t Endpoint_GetCurrentEndpoint(void);
				
				/** Selects the given endpoint number. If the address from the device descriptors is used, the
182
				 *  value should be masked with the \ref ENDPOINT_EPNUM_MASK constant to extract only the endpoint
183
184
185
186
187
				 *  number (and discarding the endpoint direction bit).
				 *
				 *  Any endpoint operations which do not require the endpoint number to be indicated will operate on
				 *  the currently selected endpoint.
				 *
188
				 *  \param[in] EndpointNumber Endpoint number to select
189
190
191
192
193
194
				 */
				static inline void Endpoint_SelectEndpoint(uint8_t EndpointNumber);
				
				/** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's
				 *  In and Out pointers to the bank's contents.
				 *
195
				 *  \param[in] EndpointNumber Endpoint number whose FIFO buffers are to be reset
196
197
198
199
200
201
				 */
				static inline void Endpoint_ResetFIFO(uint8_t EndpointNumber);
				
				/** Enables the currently selected endpoint so that data can be sent and received through it to
				 *  and from a host.
				 *
202
				 *  \note Endpoints must first be configured properly via \ref Endpoint_ConfigureEndpoint().
203
204
				 */
				static inline void Endpoint_EnableEndpoint(void);
205

206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
				/** Disables the currently selected endpoint so that data cannot be sent and received through it
				 *  to and from a host.
				 */
				static inline void Endpoint_DisableEndpoint(void);
				
				/** Determines if the currently selected endpoint is enabled, but not necessarily configured.
				 *
				 * \return Boolean True if the currently selected endpoint is enabled, false otherwise
				 */
				static inline bool Endpoint_IsEnabled(void);
				
				/** Determines if the currently selected endpoint may be read from (if data is waiting in the endpoint
				 *  bank and the endpoint is an OUT direction, or if the bank is not yet full if the endpoint is an IN
				 *  direction). This function will return false if an error has occurred in the endpoint, if the endpoint
				 *  is an OUT direction and no packet (or an empty packet) has been received, or if the endpoint is an IN
				 *  direction and the endpoint bank is full.
				 *
				 *  \ingroup Group_EndpointPacketManagement
				 *
				 *  \return Boolean true if the currently selected endpoint may be read from or written to, depending on its direction
				 */
				static inline bool Endpoint_IsReadWriteAllowed(void);
				
				/** Determines if the currently selected endpoint is configured.
				 *
				 *  \return Boolean true if the currently selected endpoint has been configured, false otherwise
				 */
				static inline bool Endpoint_IsConfigured(void);
				
				/** Returns a mask indicating which INTERRUPT type endpoints have interrupted - i.e. their
				 *  interrupt duration has elapsed. Which endpoints have interrupted can be determined by
				 *  masking the return value against (1 << {Endpoint Number}).
				 *
				 *  \return Mask whose bits indicate which endpoints have interrupted
				 */
				static inline uint8_t Endpoint_GetEndpointInterrupts(void);
				
				/** Determines if the specified endpoint number has interrupted (valid only for INTERRUPT type
				 *  endpoints).
				 *
246
				 *  \param[in] EndpointNumber  Index of the endpoint whose interrupt flag should be tested
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
				 *
				 *  \return Boolean true if the specified endpoint has interrupted, false otherwise
				 */
				static inline bool Endpoint_HasEndpointInterrupted(uint8_t EndpointNumber);
				
				/** Determines if the selected IN endpoint is ready for a new packet.
				 *
				 *  \ingroup Group_EndpointPacketManagement
				 *
				 *  \return Boolean true if the current endpoint is ready for an IN packet, false otherwise.
				 */
				static inline bool Endpoint_IsINReady(void);
				
				/** Determines if the selected OUT endpoint has received new packet.
				 *
				 *  \ingroup Group_EndpointPacketManagement
				 *
				 *  \return Boolean true if current endpoint is has received an OUT packet, false otherwise.
				 */
				static inline bool Endpoint_IsOUTReceived(void);
				
				/** Determines if the current CONTROL type endpoint has received a SETUP packet.
				 *
				 *  \ingroup Group_EndpointPacketManagement
				 *
				 *  \return Boolean true if the selected endpoint has received a SETUP packet, false otherwise.
				 */
				static inline bool Endpoint_IsSETUPReceived(void);
				
				/** Clears a received SETUP packet on the currently selected CONTROL type endpoint, freeing up the
				 *  endpoint for the next packet.
				 *
				 *  \ingroup Group_EndpointPacketManagement
				 *
				 *  \note This is not applicable for non CONTROL type endpoints.			 
				 */
283
				static inline void Endpoint_ClearSETUP(void);
284
				
285
286
				/** Sends an IN packet to the host on the currently selected endpoint, freeing up the endpoint for the
				 *  next packet and switching to the alternative endpoint bank if double banked.
287
288
289
290
291
				 *
				 *  \ingroup Group_EndpointPacketManagement
				 */
				static inline void Endpoint_ClearIN(void);
				
292
293
				/** Acknowledges an OUT packet to the host on the currently selected endpoint, freeing up the endpoint
				 *  for the next packet and switching to the alternative endpoint bank if double banked.
294
295
296
297
298
299
300
301
302
303
				 *
				 *  \ingroup Group_EndpointPacketManagement
				 */
				static inline void Endpoint_ClearOUT(void);
				
				/** Stalls the current endpoint, indicating to the host that a logical problem occurred with the
				 *  indicated endpoint and that the current transfer sequence should be aborted. This provides a
				 *  way for devices to indicate invalid commands to the host so that the current transfer can be
				 *  aborted and the host can begin its own recovery sequence.
				 *
304
				 *  The currently selected endpoint remains stalled until either the \ref Endpoint_ClearStall() macro
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
				 *  is called, or the host issues a CLEAR FEATURE request to the device for the currently selected
				 *  endpoint.
				 *
				 *  \ingroup Group_EndpointPacketManagement
				 */
				static inline void Endpoint_StallTransaction(void);
				
				/** Clears the STALL condition on the currently selected endpoint.
				 *
				 *  \ingroup Group_EndpointPacketManagement
				 */
				static inline void Endpoint_ClearStall(void);
				
				/** Determines if the currently selected endpoint is stalled, false otherwise.
				 *
				 *  \ingroup Group_EndpointPacketManagement
				 *
				 *  \return Boolean true if the currently selected endpoint is stalled, false otherwise
				 */
				static inline bool Endpoint_IsStalled(void);
				
				/** Resets the data toggle of the currently selected endpoint. */
				static inline void Endpoint_ResetDataToggle(void);
				
				/** Determines the currently selected endpoint's direction.
				 *
				 *  \return The currently selected endpoint's direction, as a ENDPOINT_DIR_* mask.
				 */
				static inline uint8_t Endpoint_GetEndpointDirection(void);
334
335
336

				/** Sets the direction of the currently selected endpoint.
				 *
337
				 *  \param[in] DirectionMask  New endpoint direction, as a ENDPOINT_DIR_* mask.
338
339
				 */
				static inline void Endpoint_SetEndpointDirection(uint8_t DirectionMask);
340
			#else
341
				#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)
342
343
344
345
346
					#define Endpoint_BytesInEndpoint()        UEBCX
				#else
					#define Endpoint_BytesInEndpoint()        UEBCLX
				#endif
				
347
348
349
350
351
				#if !defined(CONTROL_ONLY_DEVICE)
					#define Endpoint_GetCurrentEndpoint()     (UENUM & ENDPOINT_EPNUM_MASK)
				#else
					#define Endpoint_GetCurrentEndpoint()     ENDPOINT_CONTROLEP
				#endif
352
				
353
354
355
356
357
				#if !defined(CONTROL_ONLY_DEVICE)
					#define Endpoint_SelectEndpoint(epnum)    MACROS{ UENUM = epnum; }MACROE
				#else
					#define Endpoint_SelectEndpoint(epnum)    (void)epnum
				#endif
358

359
				#define Endpoint_ResetFIFO(epnum)             MACROS{ UERST = (1 << epnum); UERST = 0; }MACROE
360

361
				#define Endpoint_EnableEndpoint()             MACROS{ UECONX |= (1 << EPEN); }MACROE
362

363
				#define Endpoint_DisableEndpoint()            MACROS{ UECONX &= ~(1 << EPEN); }MACROE
364

365
				#define Endpoint_IsEnabled()                  ((UECONX & (1 << EPEN)) ? true : false)
366

367
368
369
370
				#if !defined(CONTROL_ONLY_DEVICE)
					#define Endpoint_IsReadWriteAllowed()     ((UEINTX & (1 << RWAL)) ? true : false)
				#endif
				
371
				#define Endpoint_IsConfigured()               ((UESTA0X & (1 << CFGOK)) ? true : false)
372

373
				#define Endpoint_GetEndpointInterrupts()      UEINT
374

375
376
				#define Endpoint_HasEndpointInterrupted(n)    ((UEINT & (1 << n)) ? true : false)
				
377
				#define Endpoint_IsINReady()                  ((UEINTX & (1 << TXINI))  ? true : false)
378
				
379
				#define Endpoint_IsOUTReceived()              ((UEINTX & (1 << RXOUTI)) ? true : false)
380

381
				#define Endpoint_IsSETUPReceived()            ((UEINTX & (1 << RXSTPI)) ? true : false)
382

383
				#define Endpoint_ClearSETUP()                 MACROS{ UEINTX &= ~(1 << RXSTPI); }MACROE
384

385
386
387
388
389
390
				#if !defined(CONTROL_ONLY_DEVICE)
					#define Endpoint_ClearIN()                MACROS{ uint8_t Temp = UEINTX; UEINTX = (Temp & ~(1 << TXINI)); \
					                                                  UEINTX = (Temp & ~(1 << FIFOCON)); }MACROE
				#else
					#define Endpoint_ClearIN()                MACROS{ UEINTX &= ~(1 << TXINI); }MACROE
				#endif
391

392
393
394
395
396
397
				#if !defined(CONTROL_ONLY_DEVICE)
					#define Endpoint_ClearOUT()               MACROS{ uint8_t Temp = UEINTX; UEINTX = (Temp & ~(1 << RXOUTI)); \
					                                                  UEINTX = (Temp & ~(1 << FIFOCON)); }MACROE
				#else
					#define Endpoint_ClearOUT()               MACROS{ UEINTX &= ~(1 << RXOUTI); }MACROE			
				#endif
398

399
				#define Endpoint_StallTransaction()           MACROS{ UECONX |= (1 << STALLRQ); }MACROE
400

401
				#define Endpoint_ClearStall()                 MACROS{ UECONX |= (1 << STALLRQC); }MACROE
402

403
404
405
406
407
				#define Endpoint_IsStalled()                  ((UECONX & (1 << STALLRQ)) ? true : false)

				#define Endpoint_ResetDataToggle()            MACROS{ UECONX |= (1 << RSTDT); }MACROE
				
				#define Endpoint_GetEndpointDirection()       (UECFG0X & ENDPOINT_DIR_IN)
408
409
				
				#define Endpoint_SetEndpointDirection(dir)    MACROS{ UECFG0X = ((UECFG0X & ~ENDPOINT_DIR_IN) | dir); }MACROE
410
			#endif
411
412

		/* Enums: */
413
			/** Enum for the possible error return codes of the \ref Endpoint_WaitUntilReady() function.
414
415
416
			 *
			 *  \ingroup Group_EndpointRW
			 */
417
418
419
420
421
422
423
424
425
426
427
			enum Endpoint_WaitUntilReady_ErrorCodes_t
			{
				ENDPOINT_READYWAIT_NoError                 = 0, /**< Endpoint is ready for next packet, no error. */
				ENDPOINT_READYWAIT_EndpointStalled         = 1, /**< The endpoint was stalled during the stream
				                                                 *   transfer by the host or device.
				                                                 */
				ENDPOINT_READYWAIT_DeviceDisconnected      = 2,	/**< Device was disconnected from the host while
				                                                 *   waiting for the endpoint to become ready.
				                                                 */	
				ENDPOINT_READYWAIT_Timeout                 = 3, /**< The host failed to accept or send the next packet
				                                                 *   within the software timeout period set by the
428
				                                                 *   \ref USB_STREAM_TIMEOUT_MS macro.
429
430
431
				                                                 */
			};
		
432
433
			/** Enum for the possible error return codes of the Endpoint_*_Stream_* functions.
			 *
434
			 *  \ingroup Group_EndpointStreamRW
435
			 */
436
437
			enum Endpoint_Stream_RW_ErrorCodes_t
			{
438
439
440
441
				ENDPOINT_RWSTREAM_NoError            = 0, /**< Command completed successfully, no error. */
				ENDPOINT_RWSTREAM_EndpointStalled    = 1, /**< The endpoint was stalled during the stream
				                                           *   transfer by the host or device.
				                                           */
442
				ENDPOINT_RWSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
443
444
				                                           *   the transfer.
				                                           */
445
				ENDPOINT_RWSTREAM_Timeout            = 3, /**< The host failed to accept or send the next packet
446
447
448
				                                           *   within the software timeout period set by the
				                                           *   \ref USB_STREAM_TIMEOUT_MS macro.
				                                           */
449
				ENDPOINT_RWSTREAM_CallbackAborted    = 4, /**< Indicates that the stream's callback function
450
451
			                                               *   aborted the transfer early.
				                                           */
452
453
			};
			
454
455
			/** Enum for the possible error return codes of the Endpoint_*_Control_Stream_* functions..
			 *
456
			 *  \ingroup Group_EndpointStreamRW
457
			 */
458
459
			enum Endpoint_ControlStream_RW_ErrorCodes_t
			{
460
461
				ENDPOINT_RWCSTREAM_NoError            = 0, /**< Command completed successfully, no error. */
				ENDPOINT_RWCSTREAM_HostAborted        = 1, /**< The aborted the transfer prematurely. */
462
463
464
				ENDPOINT_RWCSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
				                                            *   the transfer.
				                                            */
465
466
467
			};

		/* Inline Functions: */
468
469
			/** Reads one byte from the currently selected endpoint's bank, for OUT direction endpoints.
			 *
470
			 *  \ingroup Group_EndpointPrimitiveRW
471
472
473
			 *
			 *  \return Next byte in the currently selected endpoint's FIFO buffer
			 */
474
			static inline uint8_t Endpoint_Read_Byte(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
475
476
477
478
479
			static inline uint8_t Endpoint_Read_Byte(void)
			{
				return UEDATX;
			}

480
481
			/** Writes one byte from the currently selected endpoint's bank, for IN direction endpoints.
			 *
482
			 *  \ingroup Group_EndpointPrimitiveRW
483
			 *
484
			 *  \param[in] Byte  Next byte to write into the the currently selected endpoint's FIFO buffer
485
			 */
486
			static inline void Endpoint_Write_Byte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
487
488
489
490
491
			static inline void Endpoint_Write_Byte(const uint8_t Byte)
			{
				UEDATX = Byte;
			}

492
493
			/** Discards one byte from the currently selected endpoint's bank, for OUT direction endpoints.
			 *
494
			 *  \ingroup Group_EndpointPrimitiveRW
495
			 */
496
			static inline void Endpoint_Discard_Byte(void) ATTR_ALWAYS_INLINE;
497
498
499
500
501
502
503
504
505
			static inline void Endpoint_Discard_Byte(void)
			{
				uint8_t Dummy;
				
				Dummy = UEDATX;
			}
			
			/** Reads two bytes from the currently selected endpoint's bank in little endian format, for OUT
			 *  direction endpoints.
506
			 *
507
			 *  \ingroup Group_EndpointPrimitiveRW
508
509
			 *
			 *  \return Next word in the currently selected endpoint's FIFO buffer
510
			 */
511
			static inline uint16_t Endpoint_Read_Word_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
512
513
			static inline uint16_t Endpoint_Read_Word_LE(void)
			{
514
515
516
517
518
				union
				{
					uint16_t Word;
					uint8_t  Bytes[2];
				} Data;
519
				
520
521
				Data.Bytes[0] = UEDATX;
				Data.Bytes[1] = UEDATX;
522
			
523
				return Data.Word;
524
525
526
527
			}

			/** Reads two bytes from the currently selected endpoint's bank in big endian format, for OUT
			 *  direction endpoints.
528
			 *
529
			 *  \ingroup Group_EndpointPrimitiveRW
530
531
			 *
			 *  \return Next word in the currently selected endpoint's FIFO buffer
532
			 */
533
			static inline uint16_t Endpoint_Read_Word_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
534
535
			static inline uint16_t Endpoint_Read_Word_BE(void)
			{
536
537
538
539
540
				union
				{
					uint16_t Word;
					uint8_t  Bytes[2];
				} Data;
541
				
542
543
				Data.Bytes[1] = UEDATX;
				Data.Bytes[0] = UEDATX;
544
			
545
				return Data.Word;
546
547
548
549
			}

			/** Writes two bytes to the currently selected endpoint's bank in little endian format, for IN
			 *  direction endpoints.
550
			 *
551
			 *  \ingroup Group_EndpointPrimitiveRW
552
			 *
553
			 *  \param[in] Word  Next word to write to the currently selected endpoint's FIFO buffer
554
			 */
555
			static inline void Endpoint_Write_Word_LE(const uint16_t Word) ATTR_ALWAYS_INLINE;
556
557
558
559
560
561
562
563
			static inline void Endpoint_Write_Word_LE(const uint16_t Word)
			{
				UEDATX = (Word & 0xFF);
				UEDATX = (Word >> 8);
			}
			
			/** Writes two bytes to the currently selected endpoint's bank in big endian format, for IN
			 *  direction endpoints.
564
			 *
565
			 *  \ingroup Group_EndpointPrimitiveRW
566
			 *
567
			 *  \param[in] Word  Next word to write to the currently selected endpoint's FIFO buffer
568
			 */
569
			static inline void Endpoint_Write_Word_BE(const uint16_t Word) ATTR_ALWAYS_INLINE;
570
571
572
573
574
575
			static inline void Endpoint_Write_Word_BE(const uint16_t Word)
			{
				UEDATX = (Word >> 8);
				UEDATX = (Word & 0xFF);
			}

576
577
			/** Discards two bytes from the currently selected endpoint's bank, for OUT direction endpoints.
			 *
578
			 *  \ingroup Group_EndpointPrimitiveRW
579
			 */
580
			static inline void Endpoint_Discard_Word(void) ATTR_ALWAYS_INLINE;
581
582
583
584
585
586
587
588
589
590
			static inline void Endpoint_Discard_Word(void)
			{
				uint8_t Dummy;
				
				Dummy = UEDATX;
				Dummy = UEDATX;
			}

			/** Reads four bytes from the currently selected endpoint's bank in little endian format, for OUT
			 *  direction endpoints.
591
			 *
592
			 *  \ingroup Group_EndpointPrimitiveRW
593
594
			 *
			 *  \return Next double word in the currently selected endpoint's FIFO buffer
595
			 */
596
			static inline uint32_t Endpoint_Read_DWord_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
			static inline uint32_t Endpoint_Read_DWord_LE(void)
			{
				union
				{
					uint32_t DWord;
					uint8_t  Bytes[4];
				} Data;
				
				Data.Bytes[0] = UEDATX;
				Data.Bytes[1] = UEDATX;
				Data.Bytes[2] = UEDATX;
				Data.Bytes[3] = UEDATX;
			
				return Data.DWord;
			}

			/** Reads four bytes from the currently selected endpoint's bank in big endian format, for OUT
			 *  direction endpoints.
615
			 *
616
			 *  \ingroup Group_EndpointPrimitiveRW
617
618
			 *
			 *  \return Next double word in the currently selected endpoint's FIFO buffer
619
			 */
620
			static inline uint32_t Endpoint_Read_DWord_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
			static inline uint32_t Endpoint_Read_DWord_BE(void)
			{
				union
				{
					uint32_t DWord;
					uint8_t  Bytes[4];
				} Data;
				
				Data.Bytes[3] = UEDATX;
				Data.Bytes[2] = UEDATX;
				Data.Bytes[1] = UEDATX;
				Data.Bytes[0] = UEDATX;
			
				return Data.DWord;
			}

			/** Writes four bytes to the currently selected endpoint's bank in little endian format, for IN
			 *  direction endpoints.
639
			 *
640
			 *  \ingroup Group_EndpointPrimitiveRW
641
			 *
642
			 *  \param[in] DWord  Next double word to write to the currently selected endpoint's FIFO buffer
643
			 */
644
			static inline void Endpoint_Write_DWord_LE(const uint32_t DWord) ATTR_ALWAYS_INLINE;
645
646
			static inline void Endpoint_Write_DWord_LE(const uint32_t DWord)
			{
647
648
649
650
				UEDATX = (DWord &  0xFF);
				UEDATX = (DWord >> 8);
				UEDATX = (DWord >> 16);
				UEDATX = (DWord >> 24);
651
652
653
654
			}
			
			/** Writes four bytes to the currently selected endpoint's bank in big endian format, for IN
			 *  direction endpoints.
655
			 *
656
			 *  \ingroup Group_EndpointPrimitiveRW
657
			 *
658
			 *  \param[in] DWord  Next double word to write to the currently selected endpoint's FIFO buffer
659
			 */
660
			static inline void Endpoint_Write_DWord_BE(const uint32_t DWord) ATTR_ALWAYS_INLINE;
661
662
			static inline void Endpoint_Write_DWord_BE(const uint32_t DWord)
			{
663
664
665
666
				UEDATX = (DWord >> 24);
				UEDATX = (DWord >> 16);
				UEDATX = (DWord >> 8);
				UEDATX = (DWord &  0xFF);
667
668
			}

669
670
			/** Discards four bytes from the currently selected endpoint's bank, for OUT direction endpoints.	
			 *
671
			 *  \ingroup Group_EndpointPrimitiveRW
672
			 */
673
			static inline void Endpoint_Discard_DWord(void) ATTR_ALWAYS_INLINE;
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
			static inline void Endpoint_Discard_DWord(void)
			{
				uint8_t Dummy;
				
				Dummy = UEDATX;
				Dummy = UEDATX;
				Dummy = UEDATX;
				Dummy = UEDATX;
			}

		/* External Variables: */
			/** Global indicating the maximum packet size of the default control endpoint located at address
			 *  0 in the device. This value is set to the value indicated in the device descriptor in the user
			 *  project once the USB interface is initialized into device mode.
			 *
			 *  If space is an issue, it is possible to fix this to a static value by defining the control
			 *  endpoint size in the FIXED_CONTROL_ENDPOINT_SIZE token passed to the compiler in the makefile
			 *  via the -D switch. When a fixed control endpoint size is used, the size is no longer dynamically
			 *  read from the descriptors at runtime and instead fixed to the given value. When used, it is
			 *  important that the descriptor control endpoint size value matches the size given as the
			 *  FIXED_CONTROL_ENDPOINT_SIZE token - it is recommended that the FIXED_CONTROL_ENDPOINT_SIZE token
			 *  be used in the descriptors to ensure this.
			 *
			 *  \note This variable should be treated as read-only in the user application, and never manually
			 *        changed in value.
			 */
			#if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__))
				extern uint8_t USB_ControlEndpointSize;
			#else
				#define USB_ControlEndpointSize FIXED_CONTROL_ENDPOINT_SIZE
			#endif

		/* Function Prototypes: */
707
708
709
710
711
712
			#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
				#define _CALLBACK_PARAM     , StreamCallbackPtr_t Callback
			#else
				#define _CALLBACK_PARAM			
			#endif
		
713
714
			/** Configures the specified endpoint number with the given endpoint type, direction, bank size
			 *  and banking mode. Endpoints should be allocated in ascending order by their address in the
715
716
			 *  device (i.e. endpoint 1 should be configured before endpoint 2 and so on) to prevent fragmentation
			 *  of the USB FIFO memory.
717
718
			 *
			 *  The endpoint type may be one of the EP_TYPE_* macros listed in LowLevel.h and the direction
719
			 *  may be either \ref ENDPOINT_DIR_OUT or \ref ENDPOINT_DIR_IN.
720
721
722
723
724
			 *
			 *  The bank size must indicate the maximum packet size that the endpoint can handle. Different
			 *  endpoint numbers can handle different maximum packet sizes - refer to the chosen USB AVR's
			 *  datasheet to determine the maximum bank size for each endpoint.
			 *
725
			 *  The banking mode may be either \ref ENDPOINT_BANK_SINGLE or \ref ENDPOINT_BANK_DOUBLE.
726
			 *
727
728
			 *  \note The default control endpoint does not have to be manually configured, as it is automatically
			 *  configured by the library internally.
729
730
731
732
733
734
735
736
737
738
739
740
741
742
			 *
			 *  \note This routine will select the specified endpoint, and the endpoint will remain selected
			 *        once the routine completes regardless of if the endpoint configuration succeeds.
			 *
			 *  \return Boolean true if the configuration succeeded, false otherwise
			 */
			bool Endpoint_ConfigureEndpoint(const uint8_t  Number, const uint8_t Type, const uint8_t Direction,
			                                const uint16_t Size, const uint8_t Banks);

			/** Spinloops until the currently selected non-control endpoint is ready for the next packet of data
			 *  to be read or written to it.
			 *
			 *  \note This routine should not be called on CONTROL type endpoints.
			 *
743
744
			 *  \ingroup Group_EndpointRW
			 *
745
			 *  \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum.
746
747
			 */
			uint8_t Endpoint_WaitUntilReady(void);
748
749
750
751
752
753
			
			/** Completes the status stage of a control transfer on a CONTROL type endpoint automatically,
			 *  with respect to the data direction. This is a convenience function which can be used to
			 *  simplify user control request handling.
			 */
			void Endpoint_ClearStatusStage(void);
754
755
756
757

			/** Reads and discards the given number of bytes from the endpoint from the given buffer,
			 *  discarding fully read packets from the host as needed. The last packet is not automatically
			 *  discarded once the remaining bytes has been read; the user is responsible for manually
758
			 *  discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between
759
760
761
			 *  each USB packet, the given stream callback function is executed repeatedly until the next
			 *  packet is ready, allowing for early aborts of stream transfers.
			 *
762
763
764
			 *	The callback routine should be created according to the information in \ref Group_StreamCallbacks.
			 *  If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
			 *  disabled and this function has the Callback parameter omitted.
765
766
767
			 *
			 *  \note This routine should not be used on CONTROL type endpoints.
			 *
768
			 *  \ingroup Group_EndpointStreamRW
769
			 *
770
771
			 *  \param[in] Length    Number of bytes to send via the currently selected endpoint.
			 *  \param[in] Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback
772
			 *
773
			 *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
774
			 */
775
			uint8_t Endpoint_Discard_Stream(uint16_t Length _CALLBACK_PARAM);
776
777
778
779

			/** Writes the given number of bytes to the endpoint from the given buffer in little endian,
			 *  sending full packets to the host as needed. The last packet filled is not automatically sent;
			 *  the user is responsible for manually sending the last written packet to the host via the
780
			 *  \ref Endpoint_ClearIN() macro. Between each USB packet, the given stream callback function
781
782
783
			 *  is executed repeatedly until the endpoint is ready to accept the next packet, allowing for early
			 *  aborts of stream transfers.
			 *
784
785
786
			 *	The callback routine should be created according to the information in \ref Group_StreamCallbacks.
			 *  If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
			 *  disabled and this function has the Callback parameter omitted.
787
788
789
			 *
			 *  \note This routine should not be used on CONTROL type endpoints.
			 *
790
			 *  \ingroup Group_EndpointStreamRW
791
			 *
792
793
794
			 *  \param[in] Buffer    Pointer to the source data buffer to read from.
			 *  \param[in] Length    Number of bytes to read for the currently selected endpoint into the buffer.
			 *  \param[in] Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback
795
			 *
796
			 *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
797
			 */
798
799
			uint8_t Endpoint_Write_Stream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);

800
			/** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE().
801
802
803
804
805
806
807
808
809
810
811
			 *
			 *  \ingroup Group_EndpointStreamRW
			 *
			 *  \param[in] Buffer    Pointer to the source data buffer to read from.
			 *  \param[in] Length    Number of bytes to read for the currently selected endpoint into the buffer.
			 *  \param[in] Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback
			 *
			 *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
			 */
			uint8_t Endpoint_Write_EStream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);

812
			/** FLASH buffer source version of \ref Endpoint_Write_Stream_LE().
813
814
815
816
817
818
819
820
821
822
823
824
			 *
			 *  \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
			 *
			 *  \ingroup Group_EndpointStreamRW
			 *
			 *  \param[in] Buffer    Pointer to the source data buffer to read from.
			 *  \param[in] Length    Number of bytes to read for the currently selected endpoint into the buffer.
			 *  \param[in] Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback
			 *
			 *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
			 */
			uint8_t Endpoint_Write_PStream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
825
826
827
828

			/** Writes the given number of bytes to the endpoint from the given buffer in big endian,
			 *  sending full packets to the host as needed. The last packet filled is not automatically sent;
			 *  the user is responsible for manually sending the last written packet to the host via the
829
			 *  \ref Endpoint_ClearIN() macro. Between each USB packet, the given stream callback function
830
831
832
			 *  is executed repeatedly until the endpoint is ready to accept the next packet, allowing for early
			 *  aborts of stream transfers.
			 *
833
834
835
			 *	The callback routine should be created according to the information in \ref Group_StreamCallbacks.
			 *  If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
			 *  disabled and this function has the Callback parameter omitted.
836
837
838
			 *
			 *  \note This routine should not be used on CONTROL type endpoints.
			 *
839
			 *  \ingroup Group_EndpointStreamRW
840
			 *
841
842
843
			 *  \param[in] Buffer    Pointer to the source data buffer to read from.
			 *  \param[in] Length    Number of bytes to read for the currently selected endpoint into the buffer.
			 *  \param[in] Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback
844
			 *
845
			 *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
846
			 */
847
848
			uint8_t Endpoint_Write_Stream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);

849
			/** EEPROM buffer source version of \ref Endpoint_Write_Stream_BE().
850
851
852
853
854
855
856
857
858
859
860
			 *
			 *  \ingroup Group_EndpointStreamRW
			 *
			 *  \param[in] Buffer    Pointer to the source data buffer to read from.
			 *  \param[in] Length    Number of bytes to read for the currently selected endpoint into the buffer.
			 *  \param[in] Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback
			 *
			 *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
			 */
			uint8_t Endpoint_Write_EStream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);

861
			/** FLASH buffer source version of \ref Endpoint_Write_Stream_BE().
862
863
864
865
866
867
868
869
870
871
872
873
			 *
			 *  \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
			 *
			 *  \ingroup Group_EndpointStreamRW
			 *
			 *  \param[in] Buffer    Pointer to the source data buffer to read from.
			 *  \param[in] Length    Number of bytes to read for the currently selected endpoint into the buffer.
			 *  \param[in] Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback
			 *
			 *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
			 */
			uint8_t Endpoint_Write_PStream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
874
875
876
877

			/** Reads the given number of bytes from the endpoint from the given buffer in little endian,
			 *  discarding fully read packets from the host as needed. The last packet is not automatically
			 *  discarded once the remaining bytes has been read; the user is responsible for manually
878
			 *  discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between
879
880
881
			 *  each USB packet, the given stream callback function is executed repeatedly until the endpoint
			 *  is ready to accept the next packet, allowing for early aborts of stream transfers.
			 *
882
883
884
			 *	The callback routine should be created according to the information in \ref Group_StreamCallbacks.
			 *  If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
			 *  disabled and this function has the Callback parameter omitted.
885
886
887
			 *
			 *  \note This routine should not be used on CONTROL type endpoints.
			 *
888
			 *  \ingroup Group_EndpointStreamRW
889
			 *
890
			 *  \param[out] Buffer   Pointer to the destination data buffer to write to.
891
892
			 *  \param[in] Length    Number of bytes to send via the currently selected endpoint.
			 *  \param[in] Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback
893
			 *
894
			 *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
895
			 */
896
			uint8_t Endpoint_Read_Stream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
897

898
			/** EEPROM buffer source version of \ref Endpoint_Read_Stream_LE().
899
900
901
902
903
904
905
906
907
908
909
			 *
			 *  \ingroup Group_EndpointStreamRW
			 *
			 *  \param[out] Buffer   Pointer to the destination data buffer to write to, located in EEPROM memory space.
			 *  \param[in] Length    Number of bytes to send via the currently selected endpoint.
			 *  \param[in] Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback
			 *
			 *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
			 */
			uint8_t Endpoint_Read_EStream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
			
910
911
912
			/** Reads the given number of bytes from the endpoint from the given buffer in big endian,
			 *  discarding fully read packets from the host as needed. The last packet is not automatically
			 *  discarded once the remaining bytes has been read; the user is responsible for manually
913
			 *  discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between
914
915
916
			 *  each USB packet, the given stream callback function is executed repeatedly until the endpoint
			 *  is ready to accept the next packet, allowing for early aborts of stream transfers.
			 *
917
918
919
			 *	The callback routine should be created according to the information in \ref Group_StreamCallbacks.
			 *  If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
			 *  disabled and this function has the Callback parameter omitted.
920
921
922
			 *
			 *  \note This routine should not be used on CONTROL type endpoints.
			 *
923
			 *  \ingroup Group_EndpointStreamRW
924
			 *
925
926
927
			 *  \param[out] Buffer    Pointer to the destination data buffer to write to.
			 *  \param[in] Length    Number of bytes to send via the currently selected endpoint.
			 *  \param[in] Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback
928
			 *
929
			 *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
930
			 */
931
			uint8_t Endpoint_Read_Stream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
932

933
			/** EEPROM buffer source version of \ref Endpoint_Read_Stream_BE().
934
935
936
937
938
939
940
941
942
943
			 *
			 *  \ingroup Group_EndpointStreamRW
			 *
			 *  \param[out] Buffer   Pointer to the destination data buffer to write to, located in EEPROM memory space.
			 *  \param[in] Length    Number of bytes to send via the currently selected endpoint.
			 *  \param[in] Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback
			 *
			 *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
			 */
			uint8_t Endpoint_Read_EStream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
944

945
			/** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian,
946
			 *  sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
947
			 *  in both failure and success states; the user is responsible for manually clearing the setup OUT to
948
			 *  finalize the transfer via the \ref Endpoint_ClearOUT() macro.
949
			 *
950
951
952
			 *  \note This function automatically clears the control transfer's status stage. Do not manually attempt
			 *        to clear the status stage when using this routine in a control transaction.
			 *
953
954
955
956
957
			 *  \note This routine should only be used on CONTROL type endpoints.
			 *
			 *  \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
			 *           together; i.e. the entire stream data must be read or written at the one time.
			 *
958
			 *  \ingroup Group_EndpointStreamRW
959
			 *
960
961
			 *  \param[in] Buffer  Pointer to the source data buffer to read from.
			 *  \param[in] Length  Number of bytes to read for the currently selected endpoint into the buffer.
962
			 *
963
			 *  \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
964
			 */
965
966
967
			uint8_t Endpoint_Write_Control_Stream_LE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);

			/** EEPROM buffer source version of Endpoint_Write_Control_Stream_LE.
968
969
970
			 *
			 *  \note This function automatically clears the control transfer's status stage. Do not manually attempt
			 *        to clear the status stage when using this routine in a control transaction.
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
			 *
			 *  \note This routine should only be used on CONTROL type endpoints.
			 *
			 *  \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
			 *           together; i.e. the entire stream data must be read or written at the one time.
			 *
			 *  \ingroup Group_EndpointStreamRW
			 *
			 *  \param[in] Buffer  Pointer to the source data buffer to read from.
			 *  \param[in] Length  Number of bytes to read for the currently selected endpoint into the buffer.
			 *
			 *  \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
			 */
			uint8_t Endpoint_Write_Control_EStream_LE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);

986
			/** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_LE().
987
988
989
			 *
			 *  \note This function automatically clears the control transfer's status stage. Do not manually attempt
			 *        to clear the status stage when using this routine in a control transaction.
990
991
992
993
994
995
996
997
998
999
1000
			 *
			 *  \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
			 *
			 *  \note This routine should only be used on CONTROL type endpoints.
			 *
			 *  \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
			 *           together; i.e. the entire stream data must be read or written at the one time.
			 *
			 *  \ingroup Group_EndpointStreamRW
			 *
			 *  \param[in] Buffer  Pointer to the source data buffer to read from.