Descriptors.c 10.9 KB
Newer Older
1 2 3 4 5 6 7 8 9
/*
             LUFA Library
     Copyright (C) Dean Camera, 2010.
              
  dean [at] fourwalledcubicle [dot] com
      www.fourwalledcubicle.com
*/

/*
10
  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162
  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
	  
  Permission to use, copy, modify, distribute, and sell this 
  software and its documentation for any purpose is hereby granted
  without fee, provided that the above copyright notice appear in 
  all copies and that both that the copyright notice and this
  permission notice and warranty disclaimer appear in supporting 
  documentation, and that the name of the author not be used in 
  advertising or publicity pertaining to distribution of the 
  software without specific, written prior permission.

  The author disclaim all warranties with regard to this
  software, including all implied warranties of merchantability
  and fitness.  In no event shall the author be liable for any
  special, indirect or consequential damages or any damages
  whatsoever resulting from loss of use, data or profits, whether
  in an action of contract, negligence or other tortious action,
  arising out of or in connection with the use or performance of
  this software.
*/

/** \file
 *
 *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special 
 *  computer-readable structures which the host requests upon device enumeration, to determine
 *  the device's capabilities and functions.  
 */

#include "Descriptors.h"

/** HID class report descriptor. This is a special descriptor constructed with values from the
 *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
 *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
 *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
 *  more details on HID report descriptors.
 */
USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
{
	0x05, 0x01,          /* Usage Page (Generic Desktop)                    */
	0x09, 0x06,          /* Usage (Keyboard)                                */
	0xa1, 0x01,          /* Collection (Application)                        */
	0x75, 0x01,          /*   Report Size (1)                               */
	0x95, 0x08,          /*   Report Count (8)                              */
	0x05, 0x07,          /*   Usage Page (Key Codes)                        */
	0x19, 0xe0,          /*   Usage Minimum (Keyboard LeftControl)          */
	0x29, 0xe7,          /*   Usage Maximum (Keyboard Right GUI)            */
	0x15, 0x00,          /*   Logical Minimum (0)                           */
	0x25, 0x01,          /*   Logical Maximum (1)                           */
	0x81, 0x02,          /*   Input (Data, Variable, Absolute)              */
	0x95, 0x01,          /*   Report Count (1)                              */
	0x75, 0x08,          /*   Report Size (8)                               */
	0x81, 0x03,          /*   Input (Const, Variable, Absolute)             */
	0x95, 0x05,          /*   Report Count (5)                              */
	0x75, 0x01,          /*   Report Size (1)                               */
	0x05, 0x08,          /*   Usage Page (LEDs)                             */
	0x19, 0x01,          /*   Usage Minimum (Num Lock)                      */
	0x29, 0x05,          /*   Usage Maximum (Kana)                          */
	0x91, 0x02,          /*   Output (Data, Variable, Absolute)             */
	0x95, 0x01,          /*   Report Count (1)                              */
	0x75, 0x03,          /*   Report Size (3)                               */
	0x91, 0x03,          /*   Output (Const, Variable, Absolute)            */
	0x95, 0x06,          /*   Report Count (6)                              */
	0x75, 0x08,          /*   Report Size (8)                               */
	0x15, 0x00,          /*   Logical Minimum (0)                           */
	0x25, 0x65,          /*   Logical Maximum (101)                         */
	0x05, 0x07,          /*   Usage Page (Keyboard)                         */
	0x19, 0x00,          /*   Usage Minimum (Reserved (no event indicated)) */
	0x29, 0x65,          /*   Usage Maximum (Keyboard Application)          */
	0x81, 0x00,          /*   Input (Data, Array, Absolute)                 */
	0xc0                 /* End Collection                                  */
};

/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
 *  device characteristics, including the supported USB version, control endpoint size and the
 *  number of device configurations. The descriptor is read out by the USB host when the enumeration
 *  process begins.
 */
USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
		
	.USBSpecification       = VERSION_BCD(01.10),
	.Class                  = 0x00,
	.SubClass               = 0x00,
	.Protocol               = 0x00,
				
	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
		
	.VendorID               = 0x03EB,
	.ProductID              = 0x2042,
	.ReleaseNumber          = 0x0000,
		
	.ManufacturerStrIndex   = 0x01,
	.ProductStrIndex        = 0x02,
	.SerialNumStrIndex      = NO_DESCRIPTOR,
		
	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
};

/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
 *  of the device in one of its supported configurations, including information about any device interfaces
 *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
 *  a configuration so that the host may correctly communicate with the USB device.
 */
USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
	.Config = 
		{
			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},

			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
			.TotalInterfaces        = 1,
				
			.ConfigurationNumber    = 1,
			.ConfigurationStrIndex  = NO_DESCRIPTOR,
				
			.ConfigAttributes       = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
			
			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
		},
		
	.HID_Interface = 
		{
			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},

			.InterfaceNumber        = 0x00,
			.AlternateSetting       = 0x00,
			
			.TotalEndpoints         = 2,
				
			.Class                  = 0x03,
			.SubClass               = 0x01,
			.Protocol               = 0x01,
				
			.InterfaceStrIndex      = NO_DESCRIPTOR
		},

	.HID_KeyboardHID = 
		{  
			.Header                 = {.Size = sizeof(USB_Descriptor_HID_t), .Type = DTYPE_HID},
			
			.HIDSpec                = VERSION_BCD(01.11),
			.CountryCode            = 0x00,
			.TotalReportDescriptors = 1,
			.HIDReportType          = DTYPE_Report,
			.HIDReportLength        = sizeof(KeyboardReport)
		},
		
	.HID_ReportINEndpoint = 
		{
			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},

163
			.EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_IN | KEYBOARD_IN_EPNUM),
164 165 166 167 168 169 170 171 172
			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
			.EndpointSize           = KEYBOARD_EPSIZE,
			.PollingIntervalMS      = 0x0A
		},

	.HID_ReportOUTEndpoint = 
		{
			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},

173
			.EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_OUT | KEYBOARD_OUT_EPNUM),
174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196
			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
			.EndpointSize           = KEYBOARD_EPSIZE,
			.PollingIntervalMS      = 0x0A
		}
};

/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
 *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
 *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
 */
USB_Descriptor_String_t PROGMEM LanguageString =
{
	.Header                 = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
		
	.UnicodeString          = {LANGUAGE_ID_ENG}
};

/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
 *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
 *  Descriptor.
 */
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
197
	.Header                 = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
198
		
199
	.UnicodeString          = L"Dean Camera"
200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218
};

/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
 *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
 *  Descriptor.
 */
USB_Descriptor_String_t PROGMEM ProductString =
{
	.Header                 = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String},
		
	.UnicodeString          = L"LUFA Keyboard Demo"
};

/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
 *  documentation) by the application code so that the address and size of a requested descriptor can be given
 *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
 *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
 *  USB host.
 */
219 220 221
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
                                    const uint8_t wIndex,
                                    void** const DescriptorAddress)
222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269
{
	const uint8_t  DescriptorType   = (wValue >> 8);
	const uint8_t  DescriptorNumber = (wValue & 0xFF);

	void*    Address = NULL;
	uint16_t Size    = NO_DESCRIPTOR;

	switch (DescriptorType)
	{
		case DTYPE_Device: 
			Address = (void*)&DeviceDescriptor;
			Size    = sizeof(USB_Descriptor_Device_t);
			break;
		case DTYPE_Configuration: 
			Address = (void*)&ConfigurationDescriptor;
			Size    = sizeof(USB_Descriptor_Configuration_t);
			break;
		case DTYPE_String: 
			switch (DescriptorNumber)
			{
				case 0x00: 
					Address = (void*)&LanguageString;
					Size    = pgm_read_byte(&LanguageString.Header.Size);
					break;
				case 0x01: 
					Address = (void*)&ManufacturerString;
					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
					break;
				case 0x02: 
					Address = (void*)&ProductString;
					Size    = pgm_read_byte(&ProductString.Header.Size);
					break;
			}
			
			break;
		case DTYPE_HID: 
			Address = (void*)&ConfigurationDescriptor.HID_KeyboardHID;
			Size    = sizeof(USB_Descriptor_HID_t);
			break;
		case DTYPE_Report: 
			Address = (void*)&KeyboardReport;
			Size    = sizeof(KeyboardReport);
			break;
	}
	
	*DescriptorAddress = Address;
	return Size;
}