ADC.h 7.53 KB
Newer Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
/*
             LUFA Library
     Copyright (C) Dean Camera, 2009.
              
  dean [at] fourwalledcubicle [dot] com
      www.fourwalledcubicle.com
*/

/*
  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)

  Permission to use, copy, modify, and distribute this software
  and its documentation for any purpose and without fee is hereby
  granted, provided that the above copyright notice appear in all
  copies and that both that the copyright notice and this
  permission notice and warranty disclaimer appear in supporting
  documentation, and that the name of the author not be used in
  advertising or publicity pertaining to distribution of the
  software without specific, written prior permission.

  The author disclaim all warranties with regard to this
  software, including all implied warranties of merchantability
  and fitness.  In no event shall the author be liable for any
  special, indirect or consequential damages or any damages
  whatsoever resulting from loss of use, data or profits, whether
  in an action of contract, negligence or other tortious action,
  arising out of or in connection with the use or performance of
  this software.
*/

/** \file
 *
 *  ADC driver for the AT90USB1287, AT90USB1286, AT90USB647, AT90USB646, ATMEGA16U4 and ATMEGA32U4 AVRs.
 *
 *  \note This file should not be included directly. It is automatically included as needed by the ADC driver
36
 *        dispatch header located in LUFA/Drivers/Peripheral/ADC.h.
37
38
 */

39
40
41
42
43
44
/** \ingroup Group_ADC
 *  @defgroup Group_ADC_AT90USBXXX67 AT90USBXXX6 and AT90USBXXX7 Models
 *
 *  @{
 */
 
45
46
47
48
#ifndef __ADC_AT90USBXXX67_H__
#define __ADC_AT90USBXXX67_H__

	/* Includes: */
49
50
		#include "../../../Common/Common.h"
		
51
52
53
54
55
56
57
58
59
60
		#include <avr/io.h>
		#include <stdbool.h>
		
	/* Enable C linkage for C++ Compilers: */
		#if defined(__cplusplus)
			extern "C" {
		#endif

	/* Preprocessor Checks: */
		#if !defined(INCLUDE_FROM_ADC_H)
61
			#error Do not include this file directly. Include LUFA/Drivers/Peripheral/ADC.h instead.
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
		#endif

	/* Public Interface - May be used in end-application: */
		/* Macros: */
			/** Initializes the ADC, ready for conversions. This must be called before any other ADC operations.
			 *  The "mode" parameter should be a mask comprised of a conversion mode (free running or single) and
			 *  prescaler masks.
			 */
			#define  ADC_Init(mode)          MACROS{ ADCSRA = ((1 << ADEN) | mode);         }MACROE

			/** Turns off the ADC. If this is called, any further ADC operations will require a call to the
			 *  ADC_Init() macro before the ADC can be used again.
			 */
			#define  ADC_Off()               MACROS{ ADCSRA = 0;                            }MACROE
			
			/** Indicates if the ADC is enabled. This macro will return boolean true if the ADC subsystem is
			 *  currently enabled, or false otherwise.
			 */
			#define  ADC_GetStatus()               ((ADCSRA & (1 << ADEN)) ? true : false)

			/** Indicates if the current ADC conversion is completed, or still in progress. This returns boolean
			 *  false if the reading is still taking place, or true if the conversion is complete and ready to be
			 *  read out with ADC_GetResult().
			 */
			#define  ADC_IsReadingComplete()         (!(ADCSRA & (1 << ADSC)))
			
			/** Returns the result of the last conversion, as a 16-bit wide integer. */
			#define  ADC_GetResult()                 ADC
			
			/** Reference mask, for using the voltage present at the AVR's AREF pin for the ADC reference. */
			#define  ADC_REFERENCE_AREF              0

			/** Reference mask, for using the voltage present at the AVR's AVCC pin for the ADC reference. */
			#define  ADC_REFERENCE_AVCC              (1 << REFS0)

			/** Reference mask, for using the internally generated 2.56V reference voltage as the ADC reference. */
			#define  ADC_REFERENCE_INT2560MV         ((1 << REFS1)| (1 << REFS0))
			
			/** Left-adjusts the 10-bit ADC result, so that the upper 8 bits of the value returned by the
			 *  ADC_GetResult() macro contain the 8 most significant bits of the result. */
			#define  ADC_LEFT_ADJUSTED               (1 << ADLAR)

			/** Right-adjusts the 10-bit ADC result, so that the lower 8 bits of the value returned by the
			 *  ADC_GetResult() macro contain the 8 least significant bits of the result. */
			#define  ADC_RIGHT_ADJUSTED              (0 << ADLAR)
			
			/** Sets the ADC mode to free running, so that conversions take place continuously as fast as the ADC
			 *  is capable of at the given input clock speed. */
			#define  ADC_FREE_RUNNING                (1 << ADATE)

			/** Sets the ADC mode to single conversion, so that only a single conversion will take place before
			 *  the ADC returns to idle. */
			#define  ADC_SINGLE_CONVERSION           (0 << ADATE)
			
			/** Sets the ADC input clock to prescale by a factor of 2 the AVR's system clock. */
			#define  ADC_PRESCALE_2                  (1 << ADPS0)

			/** Sets the ADC input clock to prescale by a factor of 4 the AVR's system clock. */
			#define  ADC_PRESCALE_4                  (1 << ADPS1)

			/** Sets the ADC input clock to prescale by a factor of 8 the AVR's system clock. */
			#define  ADC_PRESCALE_8                  ((1 << ADPS0) | (1 << ADPS1))

			/** Sets the ADC input clock to prescale by a factor of 16 the AVR's system clock. */
			#define  ADC_PRESCALE_16                 (1 << ADPS2)

			/** Sets the ADC input clock to prescale by a factor of 32 the AVR's system clock. */
			#define  ADC_PRESCALE_32                 ((1 << ADPS2) | (1 << ADPS0))

			/** Sets the ADC input clock to prescale by a factor of 64 the AVR's system clock. */
			#define  ADC_PRESCALE_64                 ((1 << ADPS2) | (1 << ADPS1))

			/** Sets the ADC input clock to prescale by a factor of 128 the AVR's system clock. */
			#define  ADC_PRESCALE_128                ((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0))

		/* Inline Functions: */
			/** Configures the given ADC channel, ready for ADC conversions. This function sets the
			 *  associated port pin as an input and disables the digital portion of the I/O to reduce
			 *  power consumption.
			 *
			 *  \param Channel  ADC channel number to set up for conversions
			 */
			static inline void ADC_SetupChannel(const uint8_t Channel)
			{
146
				DDRF  &= ~(1 << Channel);
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
				DIDR0 |=  (1 << Channel);
			}
			
			/** Starts the reading of the given channel, but does not wait until the conversion has completed.
			 *  Once executed, the conversion status can be determined via the ADC_IsReadingComplete() macro and
			 *  the result read via the ADC_GetResult() macro.
			 *
			 *  \param MUXMask  Mask comprising of an ADC channel number, reference mask and adjustment mask
			 */
			static inline void ADC_StartReading(const uint8_t MUXMask)
			{
				ADMUX = MUXMask;
			
				ADCSRA |= (1 << ADSC);
			}

			/** Performs a complete single reading from channel, including a polling spinloop to wait for the
			 *  conversion to complete, and the returning of the converted value.
			 *
			 *  \param MUXMask  Mask comprising of an ADC channel number, reference mask and adjustment mask
			 */
			static inline uint16_t ADC_GetChannelReading(const uint8_t MUXMask) ATTR_WARN_UNUSED_RESULT;
			static inline uint16_t ADC_GetChannelReading(const uint8_t MUXMask)
			{
				ADC_StartReading(MUXMask);
	
				while (!(ADC_IsReadingComplete()));
	
				return ADC_GetResult();
			}

	/* Disable C linkage for C++ Compilers: */
		#if defined(__cplusplus)
			}
		#endif
		
#endif
184
185

/** @} */