TestApp.txt 1.82 KB
Newer Older
1
2
3
4
5
6
7
8
/** \file
 *
 *  This file contains special DoxyGen information for the generation of the main page and other special
 *  documentation pages. It is not a project source file.
 */
 
/** \mainpage Test Application for the LUFA library
 *
9
 *  \section SSec_Info USB Information:
10
 *
11
 *  The following table gives a rundown of the USB utilization of this demo.
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
 *
 *  <table>
 *   <tr>
 *    <td><b>USB Mode:</b></td>
 *    <td>Host/Device (Dual Role)</td>
 *   </tr>
 *   <tr>
 *    <td><b>USB Class:</b></td>
 *    <td>N/A</td>
 *   </tr>
 *   <tr> 
 *    <td><b>USB Subclass:</b></td>
 *    <td>N/A</td>
 *   </tr>
 *   <tr>
 *    <td><b>Relevant Standards:</b></td>
 *    <td>N/A</td>
 *   </tr>
 *   <tr>
 *    <td><b>Usable Speeds:</b></td>
 *    <td>Low Speed Mode, Full Speed Mode</td>
 *   </tr>
 *  </table>
35
36
37
38
 *
 *  \section SSec_Description Project Description: 
 *
 *  Test application. Demonstrates several aspects of the LUFA
39
 *  Library. On start-up the current temperature will be printed
40
41
42
43
44
 *  through the USART every 10 seconds, and the current joystick
 *  position will be indicated via the LEDs on the selected board.
 *  Pressing the HWB will initiate the USB subsystem, enumerating
 *  the device (which has <b>no actual functionality beyond
 *  enumeration as a device or as a host in this demo</b>, and serves
45
 *  only to demonstrate the USB portion of the library).
46
 * 
47
 *  Pressing the HWB a second time will turn off the USB system.
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
 *
 *  When activated, the USB events will be printed through the
 *  serial USART.
 *
 *  \section SSec_Options Project Options
 *
 *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
 *
 *  <table>
 *   <tr>
 *    <td>
 *     None
 *    </td>
 *   </tr>
 *  </table>
63
 */