TINYNVM.c 9.24 KB
Newer Older
1
2
/*
             LUFA Library
3
     Copyright (C) Dean Camera, 2011.
4

5
  dean [at] fourwalledcubicle [dot] com
6
           www.lufa-lib.org
7
8
9
*/

/*
10
  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
11

12
  Permission to use, copy, modify, distribute, and sell this
13
  software and its documentation for any purpose is hereby granted
14
  without fee, provided that the above copyright notice appear in
15
  all copies and that both that the copyright notice and this
16
17
18
  permission notice and warranty disclaimer appear in supporting
  documentation, and that the name of the author not be used in
  advertising or publicity pertaining to distribution of the
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
  software without specific, written prior permission.

  The author disclaim all warranties with regard to this
  software, including all implied warranties of merchantability
  and fitness.  In no event shall the author be liable for any
  special, indirect or consequential damages or any damages
  whatsoever resulting from loss of use, data or profits, whether
  in an action of contract, negligence or other tortious action,
  arising out of or in connection with the use or performance of
  this software.
*/

/** \file
 *
 *  Target-related functions for the TINY target's NVM module.
 */

#define  INCLUDE_FROM_TINYNVM_C
#include "TINYNVM.h"

#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)

/** Sends the given pointer address to the target's TPI pointer register */
static void TINYNVM_SendPointerAddress(const uint16_t AbsoluteAddress)
{
	/* Send the given 16-bit address to the target, LSB first */
	XPROGTarget_SendByte(TPI_CMD_SSTPR | 0);
46
	XPROGTarget_SendByte(AbsoluteAddress & 0xFF);
47
	XPROGTarget_SendByte(TPI_CMD_SSTPR | 1);
48
	XPROGTarget_SendByte(AbsoluteAddress >> 8);
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
}

/** Sends a SIN command to the target with the specified I/O address, ready for the data byte to be written.
 *
 *  \param[in] Address  6-bit I/O address to write to in the target's I/O memory space
 */
static void TINYNVM_SendReadNVMRegister(const uint8_t Address)
{
	/* The TPI command for reading from the I/O space uses strange addressing, where the I/O address's upper
	 * two bits of the 6-bit address are shifted left once */
	XPROGTarget_SendByte(TPI_CMD_SIN | ((Address & 0x30) << 1) | (Address & 0x0F));
}

/** Sends a SOUT command to the target with the specified I/O address, ready for the data byte to be read.
 *
 *  \param[in] Address  6-bit I/O address to read from in the target's I/O memory space
 */
static void TINYNVM_SendWriteNVMRegister(const uint8_t Address)
{
	/* The TPI command for reading from the I/O space uses strange addressing, where the I/O address's upper
	 * two bits of the 6-bit address are shifted left once */
	XPROGTarget_SendByte(TPI_CMD_SOUT | ((Address & 0x30) << 1) | (Address & 0x0F));
}

/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read.
 *
 *  \return Boolean true if the NVM controller became ready within the timeout period, false otherwise
 */
bool TINYNVM_WaitWhileNVMBusBusy(void)
{
	/* Poll the STATUS register to check to see if NVM access has been enabled */
80
	for (;;)
81
82
83
84
85
86
87
	{
		/* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */
		XPROGTarget_SendByte(TPI_CMD_SLDCS | TPI_STATUS_REG);

		uint8_t StatusRegister = XPROGTarget_ReceiveByte();

		/* We might have timed out waiting for the status register read response, check here */
88
		if (TimeoutExpired)
89
90
91
92
		  return false;

		/* Check the status register read response to see if the NVM bus is enabled */
		if (StatusRegister & TPI_STATUS_NVM)
93
		  return true;
94
95
96
97
98
99
100
101
102
103
104
	}
}

/** Waits while the target's NVM controller is busy performing an operation, exiting if the
 *  timeout period expires.
 *
 *  \return Boolean true if the NVM controller became ready within the timeout period, false otherwise
 */
bool TINYNVM_WaitWhileNVMControllerBusy(void)
{
	/* Poll the STATUS register to check to see if NVM access has been enabled */
105
	for (;;)
106
107
108
109
110
111
112
	{
		/* Send the SIN command to read the TPI STATUS register to see the NVM bus is busy */
		TINYNVM_SendReadNVMRegister(XPROG_Param_NVMCSRRegAddr);

		uint8_t StatusRegister = XPROGTarget_ReceiveByte();

		/* We might have timed out waiting for the status register read response, check here */
113
		if (TimeoutExpired)
114
115
116
117
		  return false;

		/* Check to see if the BUSY flag is still set */
		if (!(StatusRegister & (1 << 7)))
118
		  return true;
119
120
121
	}
}

122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
/** Enables the physical TPI interface on the target and enables access to the internal NVM controller.
 *
 *  \return Boolean true if the TPI interface was enabled successfully, false otherwise
 */
bool TINYNVM_EnableTPI(void)
{
	/* Enable TPI programming mode with the attached target */
	XPROGTarget_EnableTargetTPI();

	/* Lower direction change guard time to 0 USART bits */
	XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);
	XPROGTarget_SendByte(0x07);

	/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
	XPROGTarget_SendByte(TPI_CMD_SKEY);
	for (uint8_t i = sizeof(TPI_NVMENABLE_KEY); i > 0; i--)
	  XPROGTarget_SendByte(TPI_NVMENABLE_KEY[i - 1]);

	/* Wait until the NVM bus becomes active */
	return TINYNVM_WaitWhileNVMBusBusy();
}

/** Removes access to the target's NVM controller and physically disables the target's physical TPI interface. */
void TINYNVM_DisableTPI(void)
{
	TINYNVM_WaitWhileNVMBusBusy();

	/* Clear the NVMEN bit in the TPI STATUS register to disable TPI mode */
	XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_STATUS_REG);
	XPROGTarget_SendByte(0x00);

	XPROGTarget_DisableTargetTPI();
}

156
157
158
159
160
161
162
163
/** Reads memory from the target's memory spaces.
 *
 *  \param[in]  ReadAddress  Start address to read from within the target's address space
 *  \param[out] ReadBuffer   Buffer to store read data into
 *  \param[in]  ReadSize     Length of the data to read from the device
 *
 *  \return Boolean true if the command sequence complete successfully
 */
164
165
166
bool TINYNVM_ReadMemory(const uint16_t ReadAddress,
                        uint8_t* ReadBuffer,
                        uint16_t ReadSize)
167
168
169
170
171
172
173
174
{
	/* Wait until the NVM controller is no longer busy */
	if (!(TINYNVM_WaitWhileNVMControllerBusy()))
	  return false;

	/* Set the NVM control register to the NO OP command for memory reading */
	TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);
	XPROGTarget_SendByte(TINY_NVM_CMD_NOOP);
175

176
177
	/* Send the address of the location to read from */
	TINYNVM_SendPointerAddress(ReadAddress);
178

179
	while (ReadSize-- && !(TimeoutExpired))
180
181
182
183
184
	{
		/* Read the byte of data from the target */
		XPROGTarget_SendByte(TPI_CMD_SLD | TPI_POINTER_INDIRECT_PI);
		*(ReadBuffer++) = XPROGTarget_ReceiveByte();
	}
185

186
	return (TimeoutExpired == false);
187
188
189
190
191
192
193
194
195
196
}

/** Writes word addressed memory to the target's memory spaces.
 *
 *  \param[in] WriteAddress  Start address to write to within the target's address space
 *  \param[in] WriteBuffer   Buffer to source data from
 *  \param[in] WriteLength   Total number of bytes to write to the device (must be an integer multiple of 2)
 *
 *  \return Boolean true if the command sequence complete successfully
 */
197
198
199
bool TINYNVM_WriteMemory(const uint16_t WriteAddress,
                         uint8_t* WriteBuffer,
                         uint16_t WriteLength)
200
201
202
203
{
	/* Wait until the NVM controller is no longer busy */
	if (!(TINYNVM_WaitWhileNVMControllerBusy()))
	  return false;
204

205
206
207
208
	/* Must have an integer number of words to write - if extra byte, word-align via a dummy high byte */
	if (WriteLength & 0x01)
	  WriteBuffer[WriteLength++] = 0xFF;

209
	/* Set the NVM control register to the WORD WRITE command for memory writing */
210
211
	TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);
	XPROGTarget_SendByte(TINY_NVM_CMD_WORDWRITE);
212

213
214
	/* Send the address of the location to write to */
	TINYNVM_SendPointerAddress(WriteAddress);
215

216
217
218
219
220
221
222
223
224
	while (WriteLength)
	{
		/* Wait until the NVM controller is no longer busy */
		if (!(TINYNVM_WaitWhileNVMControllerBusy()))
		  return false;

		/* Write the low byte of data to the target */
		XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT_PI);
		XPROGTarget_SendByte(*(WriteBuffer++));
225

226
227
228
229
		/* Write the high byte of data to the target */
		XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT_PI);
		XPROGTarget_SendByte(*(WriteBuffer++));

230
		/* Need to decrement the write length twice, since we wrote a whole two-byte word */
231
232
		WriteLength -= 2;
	}
233

234
235
236
237
238
239
240
241
242
243
	return true;
}

/** Erases the target's memory space.
 *
 *  \param[in] EraseCommand  NVM erase command to send to the device
 *  \param[in] Address       Address inside the memory space to erase
 *
 *  \return Boolean true if the command sequence complete successfully
 */
244
245
bool TINYNVM_EraseMemory(const uint8_t EraseCommand,
                         const uint16_t Address)
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
{
	/* Wait until the NVM controller is no longer busy */
	if (!(TINYNVM_WaitWhileNVMControllerBusy()))
	  return false;

	/* Set the NVM control register to the target memory erase command */
	TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);
	XPROGTarget_SendByte(EraseCommand);

	/* Write to a high byte location within the target address space to start the erase process */
	TINYNVM_SendPointerAddress(Address | 0x0001);
	XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT);
	XPROGTarget_SendByte(0x00);

	/* Wait until the NVM controller is no longer busy */
	if (!(TINYNVM_WaitWhileNVMControllerBusy()))
	  return false;
263

264
265
266
267
	return true;
}

#endif
268