ISPTarget.c 6.75 KB
Newer Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
/*
             LUFA Library
     Copyright (C) Dean Camera, 2009.
              
  dean [at] fourwalledcubicle [dot] com
      www.fourwalledcubicle.com
*/

/*
  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)

  Permission to use, copy, modify, and distribute this software
  and its documentation for any purpose and without fee is hereby
  granted, provided that the above copyright notice appear in all
  copies and that both that the copyright notice and this
  permission notice and warranty disclaimer appear in supporting
  documentation, and that the name of the author not be used in
  advertising or publicity pertaining to distribution of the
  software without specific, written prior permission.

  The author disclaim all warranties with regard to this
  software, including all implied warranties of merchantability
  and fitness.  In no event shall the author be liable for any
  special, indirect or consequential damages or any damages
  whatsoever resulting from loss of use, data or profits, whether
  in an action of contract, negligence or other tortious action,
  arising out of or in connection with the use or performance of
  this software.
*/

/** \file
 *
33
 *  Target-related functions for the ISP Protocol decoder.
34
35
 */

36
#include "ISPTarget.h"
37

38
39
#if defined(ENABLE_ISP_PROTOCOL) || defined(__DOXYGEN__)

40
41
42
43
44
/** Converts the given AVR Studio SCK duration parameter (set by a SET PARAM command from the host) to the nearest
 *  possible SPI clock prescaler mask for passing to the SPI_Init() routine.
 *
 *  \return Nearest SPI prescaler mask for the given SCK frequency
 */
45
uint8_t ISPTarget_GetSPIPrescalerMask(void)
46
{
47
	static const uint8_t SPIMaskFromSCKDuration[] =
48
	{
49
50
51
52
53
54
55
56
	#if (F_CPU == 8000000)
		SPI_SPEED_FCPU_DIV_2,    // AVRStudio =   8MHz SPI, Actual =   4MHz SPI
		SPI_SPEED_FCPU_DIV_2,    // AVRStudio =   4MHz SPI, Actual =   4MHz SPI
		SPI_SPEED_FCPU_DIV_4,    // AVRStudio =   2MHz SPI, Actual =   2MHz SPI
		SPI_SPEED_FCPU_DIV_8,    // AVRStudio =   1MHz SPI, Actual =   1MHz SPI
		SPI_SPEED_FCPU_DIV_16,   // AVRStudio = 500KHz SPI, Actual = 500KHz SPI
		SPI_SPEED_FCPU_DIV_32,   // AVRStudio = 250KHz SPI, Actual = 250KHz SPI
		SPI_SPEED_FCPU_DIV_64    // AVRStudio = 125KHz SPI, Actual = 125KHz SPI	
57
	#elif (F_CPU == 16000000)
58
59
60
61
62
63
64
65
66
67
		SPI_SPEED_FCPU_DIV_2,    // AVRStudio =   8MHz SPI, Actual =   8MHz SPI
		SPI_SPEED_FCPU_DIV_4,    // AVRStudio =   4MHz SPI, Actual =   4MHz SPI
		SPI_SPEED_FCPU_DIV_8,    // AVRStudio =   2MHz SPI, Actual =   2MHz SPI
		SPI_SPEED_FCPU_DIV_16,   // AVRStudio =   1MHz SPI, Actual =   1MHz SPI
		SPI_SPEED_FCPU_DIV_32,   // AVRStudio = 500KHz SPI, Actual = 500KHz SPI
		SPI_SPEED_FCPU_DIV_64,   // AVRStudio = 250KHz SPI, Actual = 250KHz SPI		
		SPI_SPEED_FCPU_DIV_128   // AVRStudio = 125KHz SPI, Actual = 125KHz SPI
	#else
		#error No SPI prescaler masks for chosen F_CPU speed.
	#endif
68
69
70
71
72
73
74
75
76
77
	};

	uint8_t SCKDuration = V2Params_GetParameterValue(PARAM_SCK_DURATION);

	if (SCKDuration >= sizeof(SPIMaskFromSCKDuration))
	  SCKDuration = (sizeof(SPIMaskFromSCKDuration) - 1);
	  
	return SPIMaskFromSCKDuration[SCKDuration];
}

78
/** Asserts or deasserts the target's reset line, using the correct polarity as set by the host using a SET PARAM command.
79
 *  When not asserted, the line is tristated so as not to interfere with normal device operation.
80
 *
81
 *  \param[in] ResetTarget Boolean true when the target should be held in reset, false otherwise
82
 */
83
void ISPTarget_ChangeTargetResetLine(const bool ResetTarget)
84
85
86
{
	if (ResetTarget)
	{
87
		RESET_LINE_DDR |= RESET_LINE_MASK;
88
89
90
91
92
93
94
		
		if (!(V2Params_GetParameterValue(PARAM_RESET_POLARITY)))
		  RESET_LINE_PORT |= RESET_LINE_MASK;
	}
	else
	{
		RESET_LINE_DDR  &= ~RESET_LINE_MASK;
95
		RESET_LINE_PORT &= ~RESET_LINE_MASK;
96
97
98
	}
}

99
100
101
/** Waits until the last issued target memory programming command has completed, via the check mode given and using
 *  the given parameters.
 *
102
103
104
105
106
 *  \param[in] ProgrammingMode  Programming mode used and completion check to use, a mask of PROG_MODE_* constants
 *  \param[in] PollAddress  Memory address to poll for completion if polling check mode used
 *  \param[in] PollValue  Poll value to check against if polling check mode used
 *  \param[in] DelayMS  Milliseconds to delay before returning if delay check mode used
 *  \param[in] ReadMemCommand  Device low-level READ MEMORY command to send if value check mode used
107
108
109
110
 *
 *  \return V2 Protocol status \ref STATUS_CMD_OK if the no timeout occurred, \ref STATUS_RDY_BSY_TOUT or
 *          \ref STATUS_CMD_TOUT otherwise
 */
111
112
uint8_t ISPTarget_WaitForProgComplete(const uint8_t ProgrammingMode, const uint16_t PollAddress, const uint8_t PollValue,
                                      const uint8_t DelayMS, const uint8_t ReadMemCommand)
113
{
114
	uint8_t ProgrammingStatus = STATUS_CMD_OK;
115

116
117
118
119
120
121
122
123
124
	/* Determine method of Programming Complete check */
	switch (ProgrammingMode & ~(PROG_MODE_PAGED_WRITES_MASK | PROG_MODE_COMMIT_PAGE_MASK))
	{
		case PROG_MODE_WORD_TIMEDELAY_MASK:
		case PROG_MODE_PAGED_TIMEDELAY_MASK:
			V2Protocol_DelayMS(DelayMS);
			break;
		case PROG_MODE_WORD_VALUE_MASK:
		case PROG_MODE_PAGED_VALUE_MASK:
125
			TCNT0 = 0;
126
127
128
129
130
131
132
133
134
135

			do
			{
				SPI_SendByte(ReadMemCommand);
				SPI_SendByte(PollAddress >> 8);
				SPI_SendByte(PollAddress & 0xFF);				
			}
			while ((SPI_TransferByte(0x00) != PollValue) && (TCNT0 < TARGET_BUSY_TIMEOUT_MS));

			if (TCNT0 >= TARGET_BUSY_TIMEOUT_MS)
136
			 ProgrammingStatus = STATUS_CMD_TOUT;
137
138
139
140
			
			break;		
		case PROG_MODE_WORD_READYBUSY_MASK:
		case PROG_MODE_PAGED_READYBUSY_MASK:
141
			ProgrammingStatus = ISPTarget_WaitWhileTargetBusy();
142
			break;
143
144
145
	}

	return ProgrammingStatus;
146
147
}

148
149
150
151
152
/** Waits until the target has completed the last operation, by continuously polling the device's
 *  BUSY flag until it is cleared, or until the \ref TARGET_BUSY_TIMEOUT_MS timeout period has expired.
 *
 *  \return V2 Protocol status \ref STATUS_CMD_OK if the no timeout occurred, \ref STATUS_RDY_BSY_TOUT otherwise
 */
153
uint8_t ISPTarget_WaitWhileTargetBusy(void)
154
{
155
	TCNT0 = 0;
156
	
157
158
159
160
161
162
163
	do
	{
		SPI_SendByte(0xF0);
		SPI_SendByte(0x00);

		SPI_SendByte(0x00);
	}
164
	while ((SPI_ReceiveByte() & 0x01) && (TCNT0 < TARGET_BUSY_TIMEOUT_MS));
165

166
167
	if (TCNT0 >= TARGET_BUSY_TIMEOUT_MS)
	  return STATUS_RDY_BSY_TOUT;
168
169
170
171
	else
	  return STATUS_CMD_OK;
}

172
173
174
175
/** Sends a low-level LOAD EXTENDED ADDRESS command to the target, for addressing of memory beyond the
 *  64KB boundary. This sends the command with the correct address as indicated by the current address
 *  pointer variable set by the host when a SET ADDRESS command is issued.
 */
176
void ISPTarget_LoadExtendedAddress(void)
177
178
179
180
181
182
{
	SPI_SendByte(0x4D);
	SPI_SendByte(0x00);
	SPI_SendByte((CurrentAddress & 0x00FF0000) >> 16);
	SPI_SendByte(0x00);	
}
183
184

#endif