XPROGProtocol.c 13.7 KB
Newer Older
1
2
3
/*
             LUFA Library
     Copyright (C) Dean Camera, 2010.
4

5
  dean [at] fourwalledcubicle [dot] com
6
           www.lufa-lib.org
7
8
9
10
11
*/

/*
  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

12
  Permission to use, copy, modify, distribute, and sell this
13
  software and its documentation for any purpose is hereby granted
14
  without fee, provided that the above copyright notice appear in
15
  all copies and that both that the copyright notice and this
16
17
18
  permission notice and warranty disclaimer appear in supporting
  documentation, and that the name of the author not be used in
  advertising or publicity pertaining to distribution of the
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
  software without specific, written prior permission.

  The author disclaim all warranties with regard to this
  software, including all implied warranties of merchantability
  and fitness.  In no event shall the author be liable for any
  special, indirect or consequential damages or any damages
  whatsoever resulting from loss of use, data or profits, whether
  in an action of contract, negligence or other tortious action,
  arising out of or in connection with the use or performance of
  this software.
*/

/** \file
 *
 *  XPROG Protocol handler, to process V2 Protocol wrapped XPROG commands used in Atmel programmer devices.
 */

#define  INCLUDE_FROM_XPROGPROTOCOL_C
#include "XPROGProtocol.h"

#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
/** Base absolute address for the target's NVM controller for PDI programming */
41
uint32_t XPROG_Param_NVMBase       = 0x010001C0;
42
43

/** Size in bytes of the target's EEPROM page */
44
uint16_t XPROG_Param_EEPageSize    = 32;
45
46

/** Address of the TPI device's NVMCMD register for TPI programming */
47
uint8_t  XPROG_Param_NVMCMDRegAddr = 0x33;
48
49

/** Address of the TPI device's NVMCSR register for TPI programming */
50
uint8_t  XPROG_Param_NVMCSRRegAddr = 0x32;
51
52

/** Currently selected XPROG programming protocol */
53
uint8_t  XPROG_SelectedProtocol    = XPRG_PROTOCOL_PDI;
54
55
56
57
58
59
60
61
62
63

/** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI/TPI
 *  programming.
 */
void XPROGProtocol_SetMode(void)
{
	struct
	{
		uint8_t Protocol;
	} SetMode_XPROG_Params;
64

65
66
67
68
69
	Endpoint_Read_Stream_LE(&SetMode_XPROG_Params, sizeof(SetMode_XPROG_Params), NO_STREAM_CALLBACK);

	Endpoint_ClearOUT();
	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
70

71
	XPROG_SelectedProtocol = SetMode_XPROG_Params.Protocol;
72

73
74
	Endpoint_Write_Byte(CMD_XPROG_SETMODE);
	Endpoint_Write_Byte((SetMode_XPROG_Params.Protocol != XPRG_PROTOCOL_JTAG) ? STATUS_CMD_OK : STATUS_CMD_FAILED);
75
	Endpoint_ClearIN();
76
77
78
79
80
81
82
83
}

/** Handler for the CMD_XPROG command, which wraps up XPROG commands in a V2 wrapper which need to be
 *  removed and processed so that the underlying XPROG command can be handled.
 */
void XPROGProtocol_Command(void)
{
	uint8_t XPROGCommand = Endpoint_Read_Byte();
84

85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
	switch (XPROGCommand)
	{
		case XPRG_CMD_ENTER_PROGMODE:
			XPROGProtocol_EnterXPROGMode();
			break;
		case XPRG_CMD_LEAVE_PROGMODE:
			XPROGProtocol_LeaveXPROGMode();
			break;
		case XPRG_CMD_ERASE:
			XPROGProtocol_Erase();
			break;
		case XPRG_CMD_WRITE_MEM:
			XPROGProtocol_WriteMemory();
			break;
		case XPRG_CMD_READ_MEM:
			XPROGProtocol_ReadMemory();
			break;
		case XPRG_CMD_CRC:
			XPROGProtocol_ReadCRC();
			break;
		case XPRG_CMD_SET_PARAM:
			XPROGProtocol_SetParam();
			break;
	}
}

/** Handler for the XPROG ENTER_PROGMODE command to establish a connection with the attached device. */
static void XPROGProtocol_EnterXPROGMode(void)
{
	Endpoint_ClearOUT();
	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
117

118
	bool NVMBusEnabled = false;
119
120

	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
121
	  NVMBusEnabled = XMEGANVM_EnablePDI();
122
	else if (XPROG_SelectedProtocol == XPRG_PROTOCOL_TPI)
123
	  NVMBusEnabled = TINYNVM_EnableTPI();
124

125
126
127
128
129
130
131
132
133
134
135
136
137
138
	Endpoint_Write_Byte(CMD_XPROG);
	Endpoint_Write_Byte(XPRG_CMD_ENTER_PROGMODE);
	Endpoint_Write_Byte(NVMBusEnabled ? XPRG_ERR_OK : XPRG_ERR_FAILED);
	Endpoint_ClearIN();
}

/** Handler for the XPROG LEAVE_PROGMODE command to terminate the PDI programming connection with
 *  the attached device.
 */
static void XPROGProtocol_LeaveXPROGMode(void)
{
	Endpoint_ClearOUT();
	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
139

140
	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
141
	  XMEGANVM_DisablePDI();
142
	else
143
	  TINYNVM_DisableTPI();
144

145
146
147
148
	#if defined(XCK_RESCUE_CLOCK_ENABLE) && defined(ENABLE_ISP_PROTOCOL)
	ISPTarget_ConfigureRescueClock();
	#endif

149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
	Endpoint_Write_Byte(CMD_XPROG);
	Endpoint_Write_Byte(XPRG_CMD_LEAVE_PROGMODE);
	Endpoint_Write_Byte(XPRG_ERR_OK);
	Endpoint_ClearIN();
}

/** Handler for the XPRG ERASE command to erase a specific memory address space in the attached device. */
static void XPROGProtocol_Erase(void)
{
	uint8_t ReturnStatus = XPRG_ERR_OK;

	struct
	{
		uint8_t  MemoryType;
		uint32_t Address;
	} Erase_XPROG_Params;

	Endpoint_Read_Stream_LE(&Erase_XPROG_Params, sizeof(Erase_XPROG_Params), NO_STREAM_CALLBACK);
	Erase_XPROG_Params.Address = SwapEndian_32(Erase_XPROG_Params.Address);

	Endpoint_ClearOUT();
	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
172

173
174
175
	uint8_t EraseCommand;

	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
176
	{
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
		/* Determine which NVM command to send to the device depending on the memory to erase */
		switch (Erase_XPROG_Params.MemoryType)
		{
			case XPRG_ERASE_CHIP:
				EraseCommand = XMEGA_NVM_CMD_CHIPERASE;
				break;
			case XPRG_ERASE_APP:
				EraseCommand = XMEGA_NVM_CMD_ERASEAPPSEC;
				break;
			case XPRG_ERASE_BOOT:
				EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSEC;
				break;
			case XPRG_ERASE_EEPROM:
				EraseCommand = XMEGA_NVM_CMD_ERASEEEPROM;
				break;
			case XPRG_ERASE_APP_PAGE:
				EraseCommand = XMEGA_NVM_CMD_ERASEAPPSECPAGE;
				break;
			case XPRG_ERASE_BOOT_PAGE:
				EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSECPAGE;
				break;
			case XPRG_ERASE_EEPROM_PAGE:
				EraseCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGE;
				break;
			case XPRG_ERASE_USERSIG:
				EraseCommand = XMEGA_NVM_CMD_ERASEUSERSIG;
				break;
			default:
				EraseCommand = XMEGA_NVM_CMD_NOOP;
				break;
		}
208

209
		/* Erase the target memory, indicate timeout if occurred */
210
211
212
213
214
215
216
217
218
		if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
		  ReturnStatus = XPRG_ERR_TIMEOUT;
	}
	else
	{
		if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_CHIP)
		  EraseCommand = TINY_NVM_CMD_CHIPERASE;
		else
		  EraseCommand = TINY_NVM_CMD_SECTIONERASE;
219

220
		/* Erase the target memory, indicate timeout if occurred */
221
222
223
		if (!(TINYNVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
		  ReturnStatus = XPRG_ERR_TIMEOUT;
	}
224

225
226
227
	Endpoint_Write_Byte(CMD_XPROG);
	Endpoint_Write_Byte(XPRG_CMD_ERASE);
	Endpoint_Write_Byte(ReturnStatus);
228
	Endpoint_ClearIN();
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
}

/** Handler for the XPROG WRITE_MEMORY command to write to a specific memory space within the attached device. */
static void XPROGProtocol_WriteMemory(void)
{
	uint8_t ReturnStatus = XPRG_ERR_OK;

	struct
	{
		uint8_t  MemoryType;
		uint8_t  PageMode;
		uint32_t Address;
		uint16_t Length;
		uint8_t  ProgData[256];
	} WriteMemory_XPROG_Params;
244

245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
	Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params, (sizeof(WriteMemory_XPROG_Params) -
	                                                    sizeof(WriteMemory_XPROG_Params).ProgData), NO_STREAM_CALLBACK);
	WriteMemory_XPROG_Params.Address = SwapEndian_32(WriteMemory_XPROG_Params.Address);
	WriteMemory_XPROG_Params.Length  = SwapEndian_16(WriteMemory_XPROG_Params.Length);
	Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length, NO_STREAM_CALLBACK);

	Endpoint_ClearOUT();
	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);

	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
	{
		/* Assume FLASH page programming by default, as it is the common case */
		uint8_t WriteCommand     = XMEGA_NVM_CMD_WRITEFLASHPAGE;
		uint8_t WriteBuffCommand = XMEGA_NVM_CMD_LOADFLASHPAGEBUFF;
		uint8_t EraseBuffCommand = XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF;
		bool    PagedMemory      = true;
262

263
264
265
266
267
268
269
270
271
		switch (WriteMemory_XPROG_Params.MemoryType)
		{
			case XPRG_MEM_TYPE_APPL:
				WriteCommand     = XMEGA_NVM_CMD_WRITEAPPSECPAGE;
				break;
			case XPRG_MEM_TYPE_BOOT:
				WriteCommand     = XMEGA_NVM_CMD_WRITEBOOTSECPAGE;
				break;
			case XPRG_MEM_TYPE_EEPROM:
272
				WriteCommand     = XMEGA_NVM_CMD_ERASEWRITEEEPROMPAGE;
273
				WriteBuffCommand = XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF;
274
				EraseBuffCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF;
275
276
277
278
279
280
281
282
283
284
285
286
287
				break;
			case XPRG_MEM_TYPE_USERSIG:
				WriteCommand     = XMEGA_NVM_CMD_WRITEUSERSIG;
				break;
			case XPRG_MEM_TYPE_FUSE:
				WriteCommand     = XMEGA_NVM_CMD_WRITEFUSE;
				PagedMemory      = false;
				break;
			case XPRG_MEM_TYPE_LOCKBITS:
				WriteCommand     = XMEGA_NVM_CMD_WRITELOCK;
				PagedMemory      = false;
				break;
		}
288

289
		/* Send the appropriate memory write commands to the device, indicate timeout if occurred */
290
		if ((PagedMemory && !(XMEGANVM_WritePageMemory(WriteBuffCommand, EraseBuffCommand, WriteCommand,
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
													   WriteMemory_XPROG_Params.PageMode, WriteMemory_XPROG_Params.Address,
													   WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length))) ||
		   (!PagedMemory && !(XMEGANVM_WriteByteMemory(WriteCommand, WriteMemory_XPROG_Params.Address,
													   WriteMemory_XPROG_Params.ProgData[0]))))
		{
			ReturnStatus = XPRG_ERR_TIMEOUT;
		}
	}
	else
	{
		/* Send write command to the TPI device, indicate timeout if occurred */
		if (!(TINYNVM_WriteMemory(WriteMemory_XPROG_Params.Address, WriteMemory_XPROG_Params.ProgData,
		      WriteMemory_XPROG_Params.Length)))
		{
			ReturnStatus = XPRG_ERR_TIMEOUT;
		}
	}
308

309
310
	Endpoint_Write_Byte(CMD_XPROG);
	Endpoint_Write_Byte(XPRG_CMD_WRITE_MEM);
311
	Endpoint_Write_Byte(ReturnStatus);
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
	Endpoint_ClearIN();
}

/** Handler for the XPROG READ_MEMORY command to read data from a specific address space within the
 *  attached device.
 */
static void XPROGProtocol_ReadMemory(void)
{
	uint8_t ReturnStatus = XPRG_ERR_OK;

	struct
	{
		uint8_t  MemoryType;
		uint32_t Address;
		uint16_t Length;
	} ReadMemory_XPROG_Params;
328

329
330
331
332
333
334
335
336
337
	Endpoint_Read_Stream_LE(&ReadMemory_XPROG_Params, sizeof(ReadMemory_XPROG_Params), NO_STREAM_CALLBACK);
	ReadMemory_XPROG_Params.Address = SwapEndian_32(ReadMemory_XPROG_Params.Address);
	ReadMemory_XPROG_Params.Length  = SwapEndian_16(ReadMemory_XPROG_Params.Length);

	Endpoint_ClearOUT();
	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);

	uint8_t ReadBuffer[256];
338

339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
	{
		/* Read the PDI target's memory, indicate timeout if occurred */
		if (!(XMEGANVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length)))
		  ReturnStatus = XPRG_ERR_TIMEOUT;
	}
	else
	{
		/* Read the TPI target's memory, indicate timeout if occurred */
		if (!(TINYNVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length)))
		  ReturnStatus = XPRG_ERR_TIMEOUT;
	}

	Endpoint_Write_Byte(CMD_XPROG);
	Endpoint_Write_Byte(XPRG_CMD_READ_MEM);
	Endpoint_Write_Byte(ReturnStatus);
355

356
357
	if (ReturnStatus == XPRG_ERR_OK)
	  Endpoint_Write_Stream_LE(ReadBuffer, ReadMemory_XPROG_Params.Length, NO_STREAM_CALLBACK);
358

359
360
361
362
363
364
365
366
367
	Endpoint_ClearIN();
}

/** Handler for the XPROG CRC command to read a specific memory space's CRC value for comparison between the
 *  attached device's memory and a data set on the host.
 */
static void XPROGProtocol_ReadCRC(void)
{
	uint8_t ReturnStatus = XPRG_ERR_OK;
368

369
370
371
372
	struct
	{
		uint8_t CRCType;
	} ReadCRC_XPROG_Params;
373

374
375
376
377
378
	Endpoint_Read_Stream_LE(&ReadCRC_XPROG_Params, sizeof(ReadCRC_XPROG_Params), NO_STREAM_CALLBACK);

	Endpoint_ClearOUT();
	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
379

380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
	uint32_t MemoryCRC;

	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
	{
		uint8_t CRCCommand;

		/* Determine which NVM command to send to the device depending on the memory to CRC */
		switch (ReadCRC_XPROG_Params.CRCType)
		{
			case XPRG_CRC_APP:
				CRCCommand = XMEGA_NVM_CMD_APPCRC;
				break;
			case XPRG_CRC_BOOT:
				CRCCommand = XMEGA_NVM_CMD_BOOTCRC;
				break;
			default:
				CRCCommand = XMEGA_NVM_CMD_FLASHCRC;
				break;
		}
399

400
401
402
403
404
405
406
407
408
		/* Perform and retrieve the memory CRC, indicate timeout if occurred */
		if (!(XMEGANVM_GetMemoryCRC(CRCCommand, &MemoryCRC)))
		  ReturnStatus = XPRG_ERR_TIMEOUT;
	}
	else
	{
		/* TPI does not support memory CRC */
		ReturnStatus = XPRG_ERR_FAILED;
	}
409

410
411
412
	Endpoint_Write_Byte(CMD_XPROG);
	Endpoint_Write_Byte(XPRG_CMD_CRC);
	Endpoint_Write_Byte(ReturnStatus);
413

414
415
416
	if (ReturnStatus == XPRG_ERR_OK)
	{
		Endpoint_Write_Byte(MemoryCRC >> 16);
417
		Endpoint_Write_Word_LE(MemoryCRC & 0xFFFF);
418
	}
419
420

	Endpoint_ClearIN();
421
422
423
424
425
426
427
428
429
430
}

/** Handler for the XPROG SET_PARAM command to set a XPROG parameter for use when communicating with the
 *  attached device.
 */
static void XPROGProtocol_SetParam(void)
{
	uint8_t ReturnStatus = XPRG_ERR_OK;

	uint8_t XPROGParam = Endpoint_Read_Byte();
431

432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
	/* Determine which parameter is being set, store the new parameter value */
	switch (XPROGParam)
	{
		case XPRG_PARAM_NVMBASE:
			XPROG_Param_NVMBase = Endpoint_Read_DWord_BE();
			break;
		case XPRG_PARAM_EEPPAGESIZE:
			XPROG_Param_EEPageSize = Endpoint_Read_Word_BE();
			break;
		case XPRG_PARAM_NVMCMD_REG:
			XPROG_Param_NVMCMDRegAddr = Endpoint_Read_Byte();
			break;
		case XPRG_PARAM_NVMCSR_REG:
			XPROG_Param_NVMCSRRegAddr = Endpoint_Read_Byte();
			break;
		default:
			ReturnStatus = XPRG_ERR_FAILED;
			break;
	}

	Endpoint_ClearOUT();
	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
455

456
457
458
459
460
461
462
	Endpoint_Write_Byte(CMD_XPROG);
	Endpoint_Write_Byte(XPRG_CMD_SET_PARAM);
	Endpoint_Write_Byte(ReturnStatus);
	Endpoint_ClearIN();
}

#endif
463