XMEGANVM.c 12.1 KB
Newer Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
/*
             LUFA Library
     Copyright (C) Dean Camera, 2009.
              
  dean [at] fourwalledcubicle [dot] com
      www.fourwalledcubicle.com
*/

/*
  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)

  Permission to use, copy, modify, and distribute this software
  and its documentation for any purpose and without fee is hereby
  granted, provided that the above copyright notice appear in all
  copies and that both that the copyright notice and this
  permission notice and warranty disclaimer appear in supporting
  documentation, and that the name of the author not be used in
  advertising or publicity pertaining to distribution of the
  software without specific, written prior permission.

  The author disclaim all warranties with regard to this
  software, including all implied warranties of merchantability
  and fitness.  In no event shall the author be liable for any
  special, indirect or consequential damages or any damages
  whatsoever resulting from loss of use, data or profits, whether
  in an action of contract, negligence or other tortious action,
  arising out of or in connection with the use or performance of
  this software.
*/

/** \file
 *
33
 *  Target-related functions for the XMEGA target's NVM module.
34
35
 */

36
37
#define  INCLUDE_FROM_XMEGA_NVM_C
#include "XMEGANVM.h"
38

39
#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
40

41
42
43
44
/** Sends the given NVM register address to the target.
 *
 *  \param[in] Register  NVM register whose absolute address is to be sent
 */
45
void XMEGANVM_SendNVMRegAddress(const uint8_t Register)
46
{
47
	/* Determine the absolute register address from the NVM base memory address and the NVM register address */
48
49
	uint32_t Address = XPROG_Param_NVMBase | Register;

50
	/* Send the calculated 32-bit address to the target, LSB first */
51
	XMEGANVM_SendAddress(Address);
52
53
}

54
55
56
57
/** Sends the given 32-bit absolute address to the target.
 *
 *  \param[in] AbsoluteAddress  Absolute address to send to the target
 */
58
void XMEGANVM_SendAddress(const uint32_t AbsoluteAddress)
59
60
61
62
63
64
65
66
{
	/* Send the given 32-bit address to the target, LSB first */
	PDITarget_SendByte(AbsoluteAddress &  0xFF);
	PDITarget_SendByte(AbsoluteAddress >> 8);
	PDITarget_SendByte(AbsoluteAddress >> 16);
	PDITarget_SendByte(AbsoluteAddress >> 24);
}

67
68
69
70
71
/** Waits while the target's NVM controller is busy performing an operation, exiting if the
 *  timeout period expires.
 *
 *  \return Boolean true if the NVM controller became ready within the timeout period, false otherwise
 */
72
bool XMEGANVM_WaitWhileNVMControllerBusy(void)
73
{
74
	TCNT0 = 0;
75
76
	TIFR0 = (1 << OCF1A);
			
77
	uint8_t TimeoutMS = XMEGA_NVM_BUSY_TIMEOUT_MS;
78
	
79
	/* Poll the NVM STATUS register while the NVM controller is busy */
80
	while (TimeoutMS)
81
	{
82
		/* Send a LDS command to read the NVM STATUS register to check the BUSY flag */
83
		PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
84
		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_STATUS);
85
		
86
		/* Check to see if the BUSY flag is still set */
87
		if (!(PDITarget_ReceiveByte() & (1 << 7)))
88
		  return true;
89
90
91
92
93
94

		if (TIFR0 & (1 << OCF1A))
		{
			TIFR0 = (1 << OCF1A);
			TimeoutMS--;
		}
95
	}
96
97
	
	return false;
98
99
}

100
101
/** Retrieves the CRC value of the given memory space.
 *
102
103
 *  \param[in]  CRCCommand  NVM CRC command to issue to the target
 *  \param[out] CRCDest     CRC Destination when read from the target
104
 *
105
 *  \return Boolean true if the command sequence complete successfully
106
 */
107
bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest)
108
{
109
	/* Wait until the NVM controller is no longer busy */
110
	if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
111
112
	  return false;
	  
113
	/* Set the NVM command to the correct CRC read command */
114
	PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
115
	XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
116
	PDITarget_SendByte(CRCCommand);
117
118

	/* Set CMDEX bit in NVM CTRLA register to start the CRC generation */
119
	PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
120
	XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
121
122
	PDITarget_SendByte(1 << 0);

123
124
125
126
	/* Wait until the NVM bus is ready again */
	if (!(PDITarget_WaitWhileNVMBusBusy()))
	  return false;

127
	/* Wait until the NVM controller is no longer busy */
128
	if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
129
130
131
	  return false;
	
	*CRCDest = 0;
132
	
133
	/* Read the first generated CRC byte value */
134
	PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
135
	XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_DAT0);
136
	*CRCDest  = PDITarget_ReceiveByte();
137

138
	/* Read the second generated CRC byte value */
139
	PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
140
	XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_DAT1);
141
	*CRCDest |= ((uint16_t)PDITarget_ReceiveByte() << 8);
142

143
	/* Read the third generated CRC byte value */
144
	PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
145
	XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_DAT2);
146
	*CRCDest |= ((uint32_t)PDITarget_ReceiveByte() << 16);
147
	
148
	return true;
149
150
}

151
152
153
154
155
/** Reads memory from the target's memory spaces.
 *
 *  \param[in]  ReadAddress  Start address to read from within the target's address space
 *  \param[out] ReadBuffer   Buffer to store read data into
 *  \param[in]  ReadSize     Number of bytes to read
156
 *
157
 *  \return Boolean true if the command sequence complete successfully
158
 */
159
bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize)
160
{
161
	/* Wait until the NVM controller is no longer busy */
162
	if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
163
	  return false;
164
	
165
	/* Send the READNVM command to the NVM controller for reading of an arbitrary location */
166
	PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
167
168
	XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
	PDITarget_SendByte(XMEGA_NVM_CMD_READNVM);
169

170
171
	/* Load the PDI pointer register with the start address we want to read from */
	PDITarget_SendByte(PDI_CMD_ST | (PDI_POINTER_DIRECT << 2) | PDI_DATSIZE_4BYTES);
172
	XMEGANVM_SendAddress(ReadAddress);
173

174
	/* Send the REPEAT command with the specified number of bytes to read */
175
176
	PDITarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
	PDITarget_SendByte(ReadSize - 1);
177
		
178
179
180
181
	/* Send a LD command with indirect access and postincrement to read out the bytes */
	PDITarget_SendByte(PDI_CMD_LD | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
	for (uint16_t i = 0; i < ReadSize; i++)
	  *(ReadBuffer++) = PDITarget_ReceiveByte();
182
183
	
	return true;
184
185
}

186
187
/** Writes byte addressed memory to the target's memory spaces.
 *
188
189
190
 *  \param[in]  WriteCommand  Command to send to the device to write each memory byte
 *  \param[in]  WriteAddress  Start address to write to within the target's address space
 *  \param[in]  WriteBuffer   Buffer to source data from
191
 *
192
 *  \return Boolean true if the command sequence complete successfully
193
 */
194
bool XMEGANVM_WriteByteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer)
195
{
196
	/* Wait until the NVM controller is no longer busy */
197
	if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
198
	  return false;
199

200
201
	/* Send the memory write command to the target */
	PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
202
	XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
203
	PDITarget_SendByte(WriteCommand);
204
	
205
206
	/* Send new memory byte to the memory to the target */
	PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
207
	XMEGANVM_SendAddress(WriteAddress);
208
	PDITarget_SendByte(*(WriteBuffer++));
209
210
211
212
	
	return true;
}

213
214
215
216
217
218
219
220
221
222
/** Writes page addressed memory to the target's memory spaces.
 *
 *  \param[in]  WriteBuffCommand  Command to send to the device to write a byte to the memory page buffer
 *  \param[in]  EraseBuffCommand  Command to send to the device to erase the memory page buffer
 *  \param[in]  WritePageCommand  Command to send to the device to write the page buffer to the destination memory
 *  \param[in]  PageMode          Bitfield indicating what operations need to be executed on the specified page
 *  \param[in]  WriteAddress      Start address to write the page data to within the target's address space
 *  \param[in]  WriteBuffer       Buffer to source data from
 *  \param[in]  WriteSize         Number of bytes to write
 *
223
 *  \return Boolean true if the command sequence complete successfully
224
 */
225
bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand, const uint8_t EraseBuffCommand,
226
227
                               const uint8_t WritePageCommand, const uint8_t PageMode, const uint32_t WriteAddress,
                               const uint8_t* WriteBuffer, const uint16_t WriteSize)
228
229
230
231
{
	if (PageMode & XPRG_PAGEMODE_ERASE)
	{
		/* Wait until the NVM controller is no longer busy */
232
		if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
233
234
235
236
		  return false;

		/* Send the memory buffer erase command to the target */
		PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
237
		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
238
239
240
241
		PDITarget_SendByte(EraseBuffCommand);

		/* Set CMDEX bit in NVM CTRLA register to start the buffer erase */
		PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
242
		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
243
244
245
246
247
248
		PDITarget_SendByte(1 << 0);
	}

	if (WriteSize)
	{
		/* Wait until the NVM controller is no longer busy */
249
		if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
250
251
252
253
		  return false;

		/* Send the memory buffer write command to the target */
		PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
254
		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
255
256
257
258
		PDITarget_SendByte(WriteBuffCommand);

		/* Load the PDI pointer register with the start address we want to write to */
		PDITarget_SendByte(PDI_CMD_ST | (PDI_POINTER_DIRECT << 2) | PDI_DATSIZE_4BYTES);
259
		XMEGANVM_SendAddress(WriteAddress);
260
261

		/* Send the REPEAT command with the specified number of bytes to write */
262
263
		PDITarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
		PDITarget_SendByte(WriteSize - 1);
264
265
266
267
268
269
270
271
272
273
			
		/* Send a ST command with indirect access and postincrement to write the bytes */
		PDITarget_SendByte(PDI_CMD_ST | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
		for (uint16_t i = 0; i < WriteSize; i++)
		  PDITarget_SendByte(*(WriteBuffer++));
	}
	
	if (PageMode & XPRG_PAGEMODE_WRITE)
	{
		/* Wait until the NVM controller is no longer busy */
274
		if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
275
276
277
278
		  return false;

		/* Send the memory write command to the target */
		PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
279
		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
280
281
282
283
		PDITarget_SendByte(WritePageCommand);
		
		/* Send the address of the first page location to write the memory page */
		PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
284
		XMEGANVM_SendAddress(WriteAddress);
285
286
287
288
289
290
		PDITarget_SendByte(0x00);
	}

	return true;
}

291
292
293
294
/** Erases a specific memory space of the target.
 *
 *  \param[in] EraseCommand  NVM erase command to send to the device
 *  \param[in] Address  Address inside the memory space to erase
295
 *
296
 *  \return Boolean true if the command sequence complete successfully
297
 */
298
bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address)
299
{
300
	/* Wait until the NVM controller is no longer busy */
301
	if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
302
303
304
	  return false;
	  
	/* Send the memory erase command to the target */
305
	PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
306
	XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
307
308
	PDITarget_SendByte(EraseCommand);
	
309
	/* Chip erase is handled separately, since it's procedure is different to other erase types */
310
	if (EraseCommand == XMEGA_NVM_CMD_CHIPERASE)
311
312
313
	{
		/* Set CMDEX bit in NVM CTRLA register to start the chip erase */
		PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
314
		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
315
316
317
318
319
320
		PDITarget_SendByte(1 << 0);		
	}
	else
	{
		/* Other erase modes just need us to address a byte within the target memory space */
		PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
321
		XMEGANVM_SendAddress(Address);	
322
323
324
		PDITarget_SendByte(0x00);
	}
	
325
326
327
328
329
	/* Wait until the NVM bus is ready again */
	if (!(PDITarget_WaitWhileNVMBusBusy()))
	  return false;
	  
	return true;
330
331
}

332
#endif