Commit 15f84bb8 authored by Dean Camera's avatar Dean Camera
Browse files

New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which...

New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which do not adversely affect the code operation (currently only the LEDs driver).

Spell-check code/comments in the Webserver/AVRISP-MKII projects.
parent f4f44f9f
......@@ -63,7 +63,7 @@
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
......
......@@ -36,7 +36,7 @@
#include "RNDISEthernetHost.h"
/** Buffer to hold incomming and outgoing Ethernet packets. */
/** Buffer to hold incoming and outgoing Ethernet packets. */
uint8_t PacketBuffer[1024];
/** LUFA RNDIS Class driver interface configuration and state information. This structure is
......@@ -146,7 +146,7 @@ int main(void)
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
PrintIncommingPackets();
PrintIncomingPackets();
break;
}
......@@ -156,8 +156,8 @@ int main(void)
}
}
/** Prints incomming packets from the attached RNDIS device to the serial port. */
void PrintIncommingPackets(void)
/** Prints incoming packets from the attached RNDIS device to the serial port. */
void PrintIncomingPackets(void)
{
if (RNDIS_Host_IsPacketReceived(&Ethernet_RNDIS_Interface))
{
......
......@@ -68,7 +68,7 @@
/* Function Prototypes: */
void SetupHardware(void);
void PrintIncommingPackets(void);
void PrintIncomingPackets(void);
void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
void EVENT_USB_Host_DeviceAttached(void);
......
......@@ -63,7 +63,7 @@
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
......
......@@ -63,7 +63,7 @@
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
......
......@@ -63,7 +63,7 @@
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
......
......@@ -63,7 +63,7 @@
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
......
......@@ -63,7 +63,7 @@
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
......
......@@ -63,7 +63,7 @@
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
......
......@@ -63,7 +63,7 @@
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
......
......@@ -63,7 +63,7 @@
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
......
......@@ -41,7 +41,7 @@
*
* \section SSec_Description Project Description:
*
* MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incomming MIDI note
* MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incoming MIDI note
* on and off messages on any channel to the serial port. Pressing the board joystick will send note on and off messages to
* the attached MIDI device, with the board HWB controlling the note channel.
*
......
......@@ -63,7 +63,7 @@
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
......
......@@ -63,7 +63,7 @@
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
......
......@@ -63,7 +63,7 @@
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
......
......@@ -63,7 +63,7 @@
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
......
......@@ -63,7 +63,7 @@
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
......
......@@ -121,7 +121,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
void PrintIncommingPackets(void)
void PrintIncomingPackets(void)
{
uint8_t ErrorCode;
......@@ -263,7 +263,7 @@ void RNDIS_Host_Task(void)
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
PrintIncommingPackets();
PrintIncomingPackets();
break;
}
......
......@@ -84,7 +84,7 @@
/* Function Prototypes: */
void SetupHardware(void);
void PrintIncommingPackets(void);
void PrintIncomingPackets(void);
void RNDIS_Host_Task(void);
void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
......
......@@ -63,7 +63,7 @@
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment