Commit 1cb60c12 authored by Dean Camera's avatar Dean Camera
Browse files

Spell-check latest trunk source code.

parent 8d8e5c06
......@@ -712,7 +712,7 @@ int teensy_write(void *buf, int len, double timeout)
{
int r;
// TODO: imeplement timeout... how??
// TODO: implement timeout... how??
r = write(uhid_teensy_fd, buf, len);
if (r == len) return 1;
return 0;
......@@ -807,7 +807,7 @@ int read_intel_hex(const char *filename)
/* parses a line of intel hex code, stores the data in bytes[] */
/* and the beginning address in addr, and returns a 1 if the */
/* line was valid, or a 0 if an error occured. The variable */
/* line was valid, or a 0 if an error occurred. The variable */
/* num gets the number of bytes that were stored into bytes[] */
......
......@@ -29,7 +29,7 @@
*/
/** \file
* \brief Board specific LED driver header for the Arduino Leondardo board.
* \brief Board specific LED driver header for the Arduino Leonardo board.
* \copydetails Group_LEDs_LEONDARDO
*
* \note This file should not be included directly. It is automatically included as needed by the LEDs driver
......@@ -38,9 +38,9 @@
/** \ingroup Group_LEDs
* \defgroup Group_LEDs_LEONDARDO LEONDARDO
* \brief Board specific LED driver header for the Arduino Leondardo board.
* \brief Board specific LED driver header for the Arduino Leonardo board.
*
* Board specific LED driver header for the Arduino Leondardo board (http://arduino.cc/en/Main/arduinoBoardLeonardo).
* Board specific LED driver header for the Arduino Leonardo board (http://arduino.cc/en/Main/arduinoBoardLeonardo).
*
* <table>
* <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
......
......@@ -76,7 +76,7 @@ void USB_Init(
USB.CAL1 = pgm_read_byte(offsetof(NVM_PROD_SIGNATURES_t, USBCAL1));
NVM.CMD = 0;
/* Ugly workaround to ensure an aligned table, since __BIGGEST_ALIGNMENT__ == 1 for the 8-bit AVR-GCC toochain */
/* Ugly workaround to ensure an aligned table, since __BIGGEST_ALIGNMENT__ == 1 for the 8-bit AVR-GCC toolchain */
USB.EPPTR = ((intptr_t)&USB_EndpointTable[1] & ~(1 << 0));
USB.CTRLA = (USB_STFRNUM_bm | ((ENDPOINT_TOTAL_ENDPOINTS - 1) << USB_MAXEP_gp));
......
......@@ -119,7 +119,7 @@
*
* \param[in] Channel Index of the external oscillator to start.
* \param[in] Type Type of clock attached to the given oscillator channel, a value from \ref UC3_Extern_OSC_ClockTypes_t.
* \param[in] Startup Statup time of the external oscillator, a value from \ref UC3_Extern_OSC_ClockStartup_t.
* \param[in] Startup Startup time of the external oscillator, a value from \ref UC3_Extern_OSC_ClockStartup_t.
*
* \return Boolean \c true if the external oscillator was successfully started, \c false if invalid parameters specified.
*/
......@@ -270,7 +270,7 @@
*
* \param[in] Channel Index of the generic clock to stop.
*
* \return Boolean \c true if the generic clock was sucessfully stopped, \c false if invalid parameters specified.
* \return Boolean \c true if the generic clock was successfully stopped, \c false if invalid parameters specified.
*/
static inline bool AVR32CLK_StopGenericClock(const uint8_t Channel) ATTR_ALWAYS_INLINE;
static inline bool AVR32CLK_StopGenericClock(const uint8_t Channel)
......@@ -291,7 +291,7 @@
* \param[in] Source Clock source for the CPU core, a value from \ref UC3_System_ClockSource_t.
* \param[in] SourceFreq Frequency of the CPU core's clock source, in Hz.
*
* \return Boolean \c true if the CPU core clock was sucessfully altered, \c false if invalid parameters specified.
* \return Boolean \c true if the CPU core clock was successfully altered, \c false if invalid parameters specified.
*/
static inline bool AVR32CLK_SetCPUClockSource(const uint8_t Source,
const uint32_t SourceFreq) ATTR_ALWAYS_INLINE;
......
......@@ -130,7 +130,7 @@
#define ABORT(fs, res) { fp->flag |= FA__ERROR; LEAVE_FF(fs, res); }
/* File shareing feature */
/* File sharing feature */
#if _FS_SHARE
#if _FS_READONLY
#error _FS_SHARE must be 0 on read-only cfg.
......@@ -417,7 +417,7 @@ typedef struct {
#define BPB_FSVer 42 /* File system version (2) */
#define BPB_RootClus 44 /* Root dir first cluster (4) */
#define BPB_FSInfo 48 /* Offset of FSInfo sector (2) */
#define BPB_BkBootSec 50 /* Offset of backup boot sectot (2) */
#define BPB_BkBootSec 50 /* Offset of backup boot sector (2) */
#define BS_DrvNum32 64 /* Physical drive number (2) */
#define BS_BootSig32 66 /* Extended boot signature (1) */
#define BS_VolID32 67 /* Volume serial number (4) */
......@@ -448,7 +448,7 @@ typedef struct {
#define LDIR_FstClusLO 26 /* Filled by zero (0) */
#define SZ_DIR 32 /* Size of a directory entry */
#define LLE 0x40 /* Last long entry flag in LDIR_Ord */
#define DDE 0xE5 /* Deleted directory enrty mark in DIR_Name[0] */
#define DDE 0xE5 /* Deleted directory entry mark in DIR_Name[0] */
#define NDDE 0x05 /* Replacement of a character collides with DDE */
......@@ -2059,7 +2059,7 @@ FRESULT chk_mounted ( /* FR_OK(0): successful, !=0: any error occurred */
if (chk_wp && (stat & STA_PROTECT)) /* Check disk write protection if needed */
return FR_WRITE_PROTECTED;
#endif
/* Search FAT partition on the drive. Supports only generic partitionings, FDISK and SFD. */
/* Search FAT partition on the drive. Supports only generic partitioning, FDISK and SFD. */
fmt = check_fs(fs, bsect = 0); /* Check sector 0 if it is a VBR */
if (fmt == 1) { /* Not an FAT-VBR, the disk may be partitioned */
/* Check the partition listed in top of the partition table */
......@@ -2950,7 +2950,7 @@ FRESULT f_lseek (
#if _FS_MINIMIZE <= 1
/*-----------------------------------------------------------------------*/
/* Create a Directroy Object */
/* Create a Directory Object */
/*-----------------------------------------------------------------------*/
FRESULT f_opendir (
......@@ -2990,7 +2990,7 @@ FRESULT f_opendir (
/*-----------------------------------------------------------------------*/
/* Read Directory Entry in Sequense */
/* Read Directory Entry in Sequence */
/*-----------------------------------------------------------------------*/
FRESULT f_readdir (
......@@ -3633,9 +3633,9 @@ FRESULT f_mkfs (
return FR_MKFS_ABORTED;
/* Create partition table if required */
if (sfd) { /* No patition table (SFD) */
if (sfd) { /* No partition table (SFD) */
md = 0xF0;
} else { /* With patition table (FDISK) */
} else { /* With partition table (FDISK) */
DWORD n_disk = b_vol + n_vol;
mem_set(fs->win, 0, SS(fs));
......@@ -3785,18 +3785,18 @@ TCHAR* f_gets (
#if _LFN_UNICODE /* Read a character in UTF-8 encoding */
if (c >= 0x80) {
if (c < 0xC0) continue; /* Skip stray trailer */
if (c < 0xE0) { /* Two-byte sequense */
if (c < 0xE0) { /* Two-byte sequence */
f_read(fil, s, 1, &rc);
if (rc != 1) break;
c = ((c & 0x1F) << 6) | (s[0] & 0x3F);
if (c < 0x80) c = '?';
} else {
if (c < 0xF0) { /* Three-byte sequense */
if (c < 0xF0) { /* Three-byte sequence */
f_read(fil, s, 2, &rc);
if (rc != 2) break;
c = (c << 12) | ((s[0] & 0x3F) << 6) | (s[1] & 0x3F);
if (c < 0x800) c = '?';
} else { /* Reject four-byte sequense */
} else { /* Reject four-byte sequence */
c = '?';
}
}
......@@ -3945,9 +3945,9 @@ int f_printf (
case 'D' : /* Signed decimal */
case 'U' : /* Unsigned decimal */
r = 10; break;
case 'X' : /* Hexdecimal */
case 'X' : /* Hexadecimal */
r = 16; break;
default: /* Unknown type (passthrough) */
default: /* Unknown type (pass-through) */
cc = f_putc(c, fil); continue;
}
......
......@@ -3,7 +3,7 @@
/----------------------------------------------------------------------------/
/ FatFs module is a generic FAT file system module for small embedded systems.
/ This is a free software that opened for education, research and commercial
/ developments under license policy of following trems.
/ developments under license policy of following terms.
/
/ Copyright (C) 2011, ChaN, all right reserved.
/
......@@ -191,7 +191,7 @@ typedef enum {
FR_NO_FILESYSTEM, /* (13) There is no valid FAT volume on the physical drive */
FR_MKFS_ABORTED, /* (14) The f_mkfs() aborted due to any parameter error */
FR_TIMEOUT, /* (15) Could not get a grant to access the volume within defined period */
FR_LOCKED, /* (16) The operation is rejected according to the file shareing policy */
FR_LOCKED, /* (16) The operation is rejected according to the file sharing policy */
FR_NOT_ENOUGH_CORE, /* (17) LFN working buffer could not be allocated */
FR_TOO_MANY_OPEN_FILES /* (18) Number of open files > _FS_SHARE */
} FRESULT;
......@@ -215,8 +215,8 @@ FRESULT f_truncate (FIL*); /* Truncate file */
FRESULT f_sync (FIL*); /* Flush cached data of a writing file */
FRESULT f_unlink (const TCHAR*); /* Delete an existing file or directory */
FRESULT f_mkdir (const TCHAR*); /* Create a new directory */
FRESULT f_chmod (const TCHAR*, BYTE, BYTE); /* Change attriburte of the file/dir */
FRESULT f_utime (const TCHAR*, const FILINFO*); /* Change timestamp of the file/dir */
FRESULT f_chmod (const TCHAR*, BYTE, BYTE); /* Change attribute of the file/dir */
FRESULT f_utime (const TCHAR*, const FILINFO*); /* Change time-stamp of the file/dir */
FRESULT f_rename (const TCHAR*, const TCHAR*); /* Rename/Move a file or directory */
FRESULT f_forward (FIL*, UINT(*)(const BYTE*,UINT), UINT, UINT*); /* Forward data to the stream */
FRESULT f_mkfs (BYTE, BYTE, UINT); /* Create a file system on the drive */
......
......@@ -130,7 +130,7 @@
#define ABORT(fs, res) { fp->flag |= FA__ERROR; LEAVE_FF(fs, res); }
/* File shareing feature */
/* File sharing feature */
#if _FS_SHARE
#if _FS_READONLY
#error _FS_SHARE must be 0 on read-only cfg.
......@@ -417,7 +417,7 @@ typedef struct {
#define BPB_FSVer 42 /* File system version (2) */
#define BPB_RootClus 44 /* Root dir first cluster (4) */
#define BPB_FSInfo 48 /* Offset of FSInfo sector (2) */
#define BPB_BkBootSec 50 /* Offset of backup boot sectot (2) */
#define BPB_BkBootSec 50 /* Offset of backup boot sector (2) */
#define BS_DrvNum32 64 /* Physical drive number (2) */
#define BS_BootSig32 66 /* Extended boot signature (1) */
#define BS_VolID32 67 /* Volume serial number (4) */
......@@ -448,7 +448,7 @@ typedef struct {
#define LDIR_FstClusLO 26 /* Filled by zero (0) */
#define SZ_DIR 32 /* Size of a directory entry */
#define LLE 0x40 /* Last long entry flag in LDIR_Ord */
#define DDE 0xE5 /* Deleted directory enrty mark in DIR_Name[0] */
#define DDE 0xE5 /* Deleted directory entry mark in DIR_Name[0] */
#define NDDE 0x05 /* Replacement of a character collides with DDE */
......@@ -593,7 +593,7 @@ void unlock_fs (
/*-----------------------------------------------------------------------*/
/* File shareing control functions */
/* File sharing control functions */
/*-----------------------------------------------------------------------*/
#if _FS_SHARE
......@@ -819,7 +819,7 @@ DWORD get_fat ( /* 0xFFFFFFFF:Disk error, 1:Internal error, Else:Cluster status
BYTE *p;
if (clst < 2 || clst >= fs->n_fatent) /* Chack range */
if (clst < 2 || clst >= fs->n_fatent) /* Check range */
return 1;
switch (fs->fs_type) {
......@@ -1040,7 +1040,7 @@ DWORD clmt_clust ( /* <2:Error, >=2:Cluster number */
tbl = fp->cltbl + 1; /* Top of CLMT */
cl = ofs / SS(fp->fs) / fp->fs->csize; /* Cluster order from top of the file */
for (;;) {
ncl = *tbl++; /* Number of cluters in the fragment */
ncl = *tbl++; /* Number of clusters in the fragment */
if (!ncl) return 0; /* End of table? (error) */
if (cl < ncl) break; /* In this fragment? */
cl -= ncl; tbl++; /* Next fragment */
......@@ -1941,7 +1941,7 @@ FRESULT follow_path ( /* FR_OK(0): successful, !=0: error code */
res = dir_find(dj); /* Find it */
ns = *(dj->fn+NS);
if (res != FR_OK) { /* Failed to find the object */
if (res != FR_NO_FILE) break; /* Abort if any hard error occured */
if (res != FR_NO_FILE) break; /* Abort if any hard error occurred */
/* Object not found */
if (_FS_RPATH && (ns & NS_DOT)) { /* If dot entry is not exit */
dj->sclust = 0; dj->dir = 0; /* It is the root dir */
......@@ -2059,7 +2059,7 @@ FRESULT chk_mounted ( /* FR_OK(0): successful, !=0: any error occurred */
if (chk_wp && (stat & STA_PROTECT)) /* Check disk write protection if needed */
return FR_WRITE_PROTECTED;
#endif
/* Search FAT partition on the drive. Supports only generic partitionings, FDISK and SFD. */
/* Search FAT partition on the drive. Supports only generic partitioning, FDISK and SFD. */
fmt = check_fs(fs, bsect = 0); /* Check sector 0 if it is a VBR */
if (fmt == 1) { /* Not an FAT-VBR, the disk may be partitioned */
/* Check the partition listed in top of the partition table */
......@@ -2950,7 +2950,7 @@ FRESULT f_lseek (
#if _FS_MINIMIZE <= 1
/*-----------------------------------------------------------------------*/
/* Create a Directroy Object */
/* Create a Directory Object */
/*-----------------------------------------------------------------------*/
FRESULT f_opendir (
......@@ -2990,7 +2990,7 @@ FRESULT f_opendir (
/*-----------------------------------------------------------------------*/
/* Read Directory Entry in Sequense */
/* Read Directory Entry in Sequence */
/*-----------------------------------------------------------------------*/
FRESULT f_readdir (
......@@ -3297,7 +3297,7 @@ FRESULT f_mkdir (
mem_set(dir, 0, SS(dj.fs));
}
}
if (res == FR_OK) res = dir_register(&dj); /* Register the object to the directoy */
if (res == FR_OK) res = dir_register(&dj); /* Register the object to the directory */
if (res != FR_OK) {
remove_chain(dj.fs, dcl); /* Could not register, remove cluster chain */
} else {
......@@ -3361,7 +3361,7 @@ FRESULT f_chmod (
/*-----------------------------------------------------------------------*/
/* Change Timestamp */
/* Change Time-stamp */
/*-----------------------------------------------------------------------*/
FRESULT f_utime (
......@@ -3633,9 +3633,9 @@ FRESULT f_mkfs (
return FR_MKFS_ABORTED;
/* Create partition table if required */
if (sfd) { /* No patition table (SFD) */
if (sfd) { /* No partition table (SFD) */
md = 0xF0;
} else { /* With patition table (FDISK) */
} else { /* With partition table (FDISK) */
DWORD n_disk = b_vol + n_vol;
mem_set(fs->win, 0, SS(fs));
......@@ -3785,18 +3785,18 @@ TCHAR* f_gets (
#if _LFN_UNICODE /* Read a character in UTF-8 encoding */
if (c >= 0x80) {
if (c < 0xC0) continue; /* Skip stray trailer */
if (c < 0xE0) { /* Two-byte sequense */
if (c < 0xE0) { /* Two-byte sequence */
f_read(fil, s, 1, &rc);
if (rc != 1) break;
c = ((c & 0x1F) << 6) | (s[0] & 0x3F);
if (c < 0x80) c = '?';
} else {
if (c < 0xF0) { /* Three-byte sequense */
if (c < 0xF0) { /* Three-byte sequence */
f_read(fil, s, 2, &rc);
if (rc != 2) break;
c = (c << 12) | ((s[0] & 0x3F) << 6) | (s[1] & 0x3F);
if (c < 0x800) c = '?';
} else { /* Reject four-byte sequense */
} else { /* Reject four-byte sequence */
c = '?';
}
}
......@@ -3945,7 +3945,7 @@ int f_printf (
case 'D' : /* Signed decimal */
case 'U' : /* Unsigned decimal */
r = 10; break;
case 'X' : /* Hexdecimal */
case 'X' : /* Hexadecimal */
r = 16; break;
default: /* Unknown type (passthrough) */
cc = f_putc(c, fil); continue;
......
......@@ -3,7 +3,7 @@
/----------------------------------------------------------------------------/
/ FatFs module is a generic FAT file system module for small embedded systems.
/ This is a free software that opened for education, research and commercial
/ developments under license policy of following trems.
/ developments under license policy of following terms.
/
/ Copyright (C) 2011, ChaN, all right reserved.
/
......@@ -176,14 +176,14 @@ typedef struct {
typedef enum {
FR_OK = 0, /* (0) Succeeded */
FR_DISK_ERR, /* (1) A hard error occured in the low level disk I/O layer */
FR_DISK_ERR, /* (1) A hard error occurred in the low level disk I/O layer */
FR_INT_ERR, /* (2) Assertion failed */
FR_NOT_READY, /* (3) The physical drive cannot work */
FR_NO_FILE, /* (4) Could not find the file */
FR_NO_PATH, /* (5) Could not find the path */
FR_INVALID_NAME, /* (6) The path name format is invalid */
FR_DENIED, /* (7) Acces denied due to prohibited access or directory full */
FR_EXIST, /* (8) Acces denied due to prohibited access */
FR_DENIED, /* (7) Access denied due to prohibited access or directory full */
FR_EXIST, /* (8) Access denied due to prohibited access */
FR_INVALID_OBJECT, /* (9) The file/directory object is invalid */
FR_WRITE_PROTECTED, /* (10) The physical drive is write protected */
FR_INVALID_DRIVE, /* (11) The logical drive number is invalid */
......@@ -191,7 +191,7 @@ typedef enum {
FR_NO_FILESYSTEM, /* (13) There is no valid FAT volume on the physical drive */
FR_MKFS_ABORTED, /* (14) The f_mkfs() aborted due to any parameter error */
FR_TIMEOUT, /* (15) Could not get a grant to access the volume within defined period */
FR_LOCKED, /* (16) The operation is rejected according to the file shareing policy */
FR_LOCKED, /* (16) The operation is rejected according to the file sharing policy */
FR_NOT_ENOUGH_CORE, /* (17) LFN working buffer could not be allocated */
FR_TOO_MANY_OPEN_FILES /* (18) Number of open files > _FS_SHARE */
} FRESULT;
......@@ -215,8 +215,8 @@ FRESULT f_truncate (FIL*); /* Truncate file */
FRESULT f_sync (FIL*); /* Flush cached data of a writing file */
FRESULT f_unlink (const TCHAR*); /* Delete an existing file or directory */
FRESULT f_mkdir (const TCHAR*); /* Create a new directory */
FRESULT f_chmod (const TCHAR*, BYTE, BYTE); /* Change attriburte of the file/dir */
FRESULT f_utime (const TCHAR*, const FILINFO*); /* Change timestamp of the file/dir */
FRESULT f_chmod (const TCHAR*, BYTE, BYTE); /* Change attribute of the file/dir */
FRESULT f_utime (const TCHAR*, const FILINFO*); /* Change time-stamp of the file/dir */
FRESULT f_rename (const TCHAR*, const TCHAR*); /* Rename/Move a file or directory */
FRESULT f_forward (FIL*, UINT(*)(const BYTE*,UINT), UINT, UINT*); /* Forward data to the stream */
FRESULT f_mkfs (BYTE, BYTE, UINT); /* Create a file system on the drive */
......
......@@ -117,7 +117,7 @@
/ 1: Enable relative path. f_chdrive() and f_chdir() are available.
/ 2: f_getcwd() is available in addition to 1.
/
/ Note that output of the f_readdir fnction is affected by this option. */
/ Note that output of the f_readdir function is affected by this option. */
......@@ -134,18 +134,18 @@
/ Always set 512 for memory card and hard disk but a larger value may be
/ required for on-board flash memory, floppy disk and optical disk.
/ When _MAX_SS is larger than 512, it configures FatFs to variable sector size
/ and GET_SECTOR_SIZE command must be implememted to the disk_ioctl function. */
/ and GET_SECTOR_SIZE command must be implemented to the disk_ioctl function. */
#define _MULTI_PARTITION 0 /* 0:Single partition or 1:Multiple partition */
/* When set to 0, each volume is bound to the same physical drive number and
/ it can mount only first primaly partition. When it is set to 1, each volume
/ it can mount only first primary partition. When it is set to 1, each volume
/ is tied to the partitions listed in VolToPart[]. */
#define _USE_ERASE 0 /* 0:Disable or 1:Enable */
/* To enable sector erase feature, set _USE_ERASE to 1. CTRL_ERASE_SECTOR command
/ should be added to the disk_ioctl functio. */
/ should be added to the disk_ioctl function. */
......@@ -182,7 +182,7 @@
#define _FS_SHARE 0 /* 0:Disable or >=1:Enable */
/* To enable file shareing feature, set _FS_SHARE to 1 or greater. The value
/* To enable file sharing feature, set _FS_SHARE to 1 or greater. The value
defines how many files can be opened simultaneously. */
......
......@@ -1889,7 +1889,7 @@ uip_process(u8_t flag)
/* Calculate IP checksum. */
BUF->ipchksum = 0;
BUF->ipchksum = ~(uip_ipchksum());
DEBUG_PRINTF("uip ip_send_nolen: chkecum 0x%04x\n", uip_ipchksum());
DEBUG_PRINTF("uip ip_send_nolen: checksum 0x%04x\n", uip_ipchksum());
#endif /* UIP_CONF_IPV6 */
UIP_STAT(++uip_stat.tcp.sent);
#if UIP_CONF_IPV6
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment