Fix SoftUART.c not compiling due to accidental check in of changes not yet...

Fix SoftUART.c not compiling due to accidental check in of changes not yet complete in the rest of the XPLAINBridge project code.

LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h

@@ -81,19 +81,23 @@
 			#define ADC_REFERENCE_INT2560MV         ((1 << REFS1) | (1 << REFS0))
 
 			/** Left-adjusts the 10-bit ADC result, so that the upper 8 bits of the value returned by the
-			 *  ADC_GetResult() macro contain the 8 most significant bits of the result. */
+			 *  ADC_GetResult() macro contain the 8 most significant bits of the result.
+			 */
 			#define ADC_LEFT_ADJUSTED               (1 << ADLAR)
 
 			/** Right-adjusts the 10-bit ADC result, so that the lower 8 bits of the value returned by the
-			 *  ADC_GetResult() macro contain the 8 least significant bits of the result. */
+			 *  ADC_GetResult() macro contain the 8 least significant bits of the result.
+			 */
 			#define ADC_RIGHT_ADJUSTED              (0 << ADLAR)
 
 			/** Sets the ADC mode to free running, so that conversions take place continuously as fast as the ADC
-			 *  is capable of at the given input clock speed. */
+			 *  is capable of at the given input clock speed.
+			 */
 			#define ADC_FREE_RUNNING                (1 << ADATE)
 
 			/** Sets the ADC mode to single conversion, so that only a single conversion will take place before
-			 *  the ADC returns to idle. */
+			 *  the ADC returns to idle.
+			 */
 			#define ADC_SINGLE_CONVERSION           (0 << ADATE)
 
 			/** Sets the ADC input clock to prescale by a factor of 2 the AVR's system clock. */

Projects/XPLAINBridge/Lib/SoftUART.c

@@ -120,7 +120,7 @@ ISR(TIMER1_CAPT_vect, ISR_BLOCK)
 
 		/* Reception complete, store the received byte if stop bit valid */
 		if (SRX_Cached)
-		  RingBuffer_Insert(&XMEGAtoUSB_Buffer, RX_Data);
+		  RingBuffer_Insert(&UARTtoUSB_Buffer, RX_Data);
 	}
 }
 
@@ -140,13 +140,13 @@ ISR(TIMER3_CAPT_vect, ISR_BLOCK)
 		TX_Data >>= 1;
 		TX_BitsRemaining--;
 	}
-	else if (!(RX_BitsRemaining) && !(RingBuffer_IsEmpty(&USBtoXMEGA_Buffer)))
+	else if (!(RX_BitsRemaining) && !(RingBuffer_IsEmpty(&USBtoUART_Buffer)))
 	{
 		/* Start bit - TX line low */
 		STXPORT &= ~(1 << STX);
 
 		/* Transmission complete, get the next byte to send (if available) */
-		TX_Data          = ~RingBuffer_Remove(&USBtoXMEGA_Buffer);
+		TX_Data          = ~RingBuffer_Remove(&USBtoUART_Buffer);
 		TX_BitsRemaining = 9;
 	}
 }