From 3472af91a5c167cf243335fa32b5284a4a796e39 Mon Sep 17 00:00:00 2001 From: Dean Camera <dean@fourwalledcubicle.com> Date: Tue, 28 Jul 2009 13:53:52 +0000 Subject: [PATCH] Change project makefiles so that the current target settings and not just the board selection is printed during the build process. Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected. --- Bootloaders/CDC/makefile | 39 ++++++------ Bootloaders/DFU/makefile | 39 ++++++------ Bootloaders/TeensyHID/makefile | 39 ++++++------ Demos/Device/ClassDriver/AudioInput/makefile | 60 +++++++----------- .../ClassDriver/AudioOutput/AudioOutput.c | 2 + Demos/Device/ClassDriver/AudioOutput/makefile | 62 +++++++------------ Demos/Device/ClassDriver/CDC/makefile | 60 +++++++----------- Demos/Device/ClassDriver/DualCDC/makefile | 60 +++++++----------- Demos/Device/ClassDriver/GenericHID/makefile | 60 +++++++----------- Demos/Device/ClassDriver/Joystick/makefile | 60 +++++++----------- Demos/Device/ClassDriver/Keyboard/makefile | 60 +++++++----------- .../Device/ClassDriver/KeyboardMouse/makefile | 60 +++++++----------- Demos/Device/ClassDriver/MIDI/makefile | 60 +++++++----------- Demos/Device/ClassDriver/MassStorage/makefile | 60 +++++++----------- Demos/Device/ClassDriver/Mouse/makefile | 60 +++++++----------- .../Device/ClassDriver/RNDISEthernet/makefile | 60 +++++++----------- Demos/Device/ClassDriver/USBtoSerial/makefile | 60 +++++++----------- Demos/Device/Incomplete/Sideshow/makefile | 60 +++++++----------- Demos/Device/LowLevel/AudioInput/makefile | 60 +++++++----------- .../Device/LowLevel/AudioOutput/AudioOutput.c | 2 + Demos/Device/LowLevel/AudioOutput/makefile | 60 +++++++----------- Demos/Device/LowLevel/CDC/makefile | 60 +++++++----------- Demos/Device/LowLevel/DualCDC/makefile | 60 +++++++----------- Demos/Device/LowLevel/GenericHID/makefile | 60 +++++++----------- Demos/Device/LowLevel/Joystick/makefile | 60 +++++++----------- Demos/Device/LowLevel/Keyboard/makefile | 60 +++++++----------- Demos/Device/LowLevel/KeyboardMouse/makefile | 60 +++++++----------- Demos/Device/LowLevel/MIDI/makefile | 60 +++++++----------- Demos/Device/LowLevel/MassStorage/makefile | 60 +++++++----------- Demos/Device/LowLevel/Mouse/makefile | 60 +++++++----------- Demos/Device/LowLevel/RNDISEthernet/makefile | 60 +++++++----------- Demos/Device/LowLevel/USBtoSerial/makefile | 60 +++++++----------- Demos/Host/ClassDriver/CDCHost/makefile | 60 +++++++----------- Demos/Host/ClassDriver/MouseHost/makefile | 60 +++++++----------- Demos/Host/Incomplete/BluetoothHost/makefile | 60 +++++++----------- Demos/Host/LowLevel/CDCHost/makefile | 60 +++++++----------- Demos/Host/LowLevel/GenericHIDHost/makefile | 60 +++++++----------- Demos/Host/LowLevel/KeyboardHost/makefile | 60 +++++++----------- .../LowLevel/KeyboardHostWithParser/makefile | 60 +++++++----------- Demos/Host/LowLevel/MassStorageHost/makefile | 60 +++++++----------- Demos/Host/LowLevel/MouseHost/makefile | 60 +++++++----------- .../LowLevel/MouseHostWithParser/makefile | 60 +++++++----------- Demos/Host/LowLevel/PrinterHost/makefile | 60 +++++++----------- Demos/Host/LowLevel/StillImageHost/makefile | 60 +++++++----------- Demos/OTG/TestApp/makefile | 60 +++++++----------- Projects/Benito/makefile | 60 +++++++----------- Projects/Magstripe/makefile | 60 +++++++----------- Projects/MissileLauncher/makefile | 60 +++++++----------- 48 files changed, 968 insertions(+), 1735 deletions(-) diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile index 21524086c..43341a6d5 100644 --- a/Bootloaders/CDC/makefile +++ b/Bootloaders/CDC/makefile @@ -458,7 +458,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -501,27 +501,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -707,8 +709,7 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen \ No newline at end of file diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile index 0964f0331..dc275bc65 100644 --- a/Bootloaders/DFU/makefile +++ b/Bootloaders/DFU/makefile @@ -460,7 +460,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -503,27 +503,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -709,8 +711,7 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen \ No newline at end of file diff --git a/Bootloaders/TeensyHID/makefile b/Bootloaders/TeensyHID/makefile index 0751024c3..9b6c5d7d4 100644 --- a/Bootloaders/TeensyHID/makefile +++ b/Bootloaders/TeensyHID/makefile @@ -459,7 +459,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -502,27 +502,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -708,8 +710,7 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen \ No newline at end of file diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile index 98318eadc..e97cffb2f 100644 --- a/Demos/Device/ClassDriver/AudioInput/makefile +++ b/Demos/Device/ClassDriver/AudioInput/makefile @@ -465,7 +465,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -508,27 +508,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -540,26 +542,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -734,8 +716,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c index bbcd2fd7c..9a63af68a 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c @@ -103,8 +103,10 @@ void ProcessNextSample(void) int8_t LeftSample_8Bit = (LeftSample_16Bit >> 8); int8_t RightSample_8Bit = (RightSample_16Bit >> 8); +#if !defined(AUDIO_OUT_STEREO) /* Mix the two channels together to produce a mono, 8-bit sample */ int8_t MixedSample_8Bit = (((int16_t)LeftSample_8Bit + (int16_t)RightSample_8Bit) >> 1); +#endif #if defined(AUDIO_OUT_MONO) /* Load the sample into the PWM timer channel */ diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile index 9c4605e88..d61c27a21 100644 --- a/Demos/Device/ClassDriver/AudioOutput/makefile +++ b/Demos/Device/ClassDriver/AudioOutput/makefile @@ -193,7 +193,7 @@ CSTANDARD = -std=gnu99 # Place -D or -U options here for C sources CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS) -CDEFS += -DAUDIO_OUT_MONO +CDEFS += -DAUDIO_OUT_STEREO # Place -D or -U options here for ASM sources @@ -466,7 +466,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -509,27 +509,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -541,26 +543,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -735,8 +717,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/ClassDriver/CDC/makefile b/Demos/Device/ClassDriver/CDC/makefile index 03f1633a6..e822c24eb 100644 --- a/Demos/Device/ClassDriver/CDC/makefile +++ b/Demos/Device/ClassDriver/CDC/makefile @@ -464,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -507,27 +507,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -539,26 +541,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -733,8 +715,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/ClassDriver/DualCDC/makefile b/Demos/Device/ClassDriver/DualCDC/makefile index 7e1c1f91d..46ec2294b 100644 --- a/Demos/Device/ClassDriver/DualCDC/makefile +++ b/Demos/Device/ClassDriver/DualCDC/makefile @@ -464,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -507,27 +507,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -539,26 +541,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -733,8 +715,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile index ee6d9616e..bc3dc3a29 100644 --- a/Demos/Device/ClassDriver/GenericHID/makefile +++ b/Demos/Device/ClassDriver/GenericHID/makefile @@ -465,7 +465,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -508,27 +508,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -540,26 +542,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -734,8 +716,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/ClassDriver/Joystick/makefile b/Demos/Device/ClassDriver/Joystick/makefile index efc011f6f..393e58b14 100644 --- a/Demos/Device/ClassDriver/Joystick/makefile +++ b/Demos/Device/ClassDriver/Joystick/makefile @@ -465,7 +465,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -508,27 +508,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -540,26 +542,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -734,8 +716,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/ClassDriver/Keyboard/makefile b/Demos/Device/ClassDriver/Keyboard/makefile index 19208d970..5a11201d6 100644 --- a/Demos/Device/ClassDriver/Keyboard/makefile +++ b/Demos/Device/ClassDriver/Keyboard/makefile @@ -465,7 +465,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -508,27 +508,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -540,26 +542,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -734,8 +716,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/ClassDriver/KeyboardMouse/makefile b/Demos/Device/ClassDriver/KeyboardMouse/makefile index 7f606fe36..1b086f3bf 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/makefile +++ b/Demos/Device/ClassDriver/KeyboardMouse/makefile @@ -465,7 +465,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -508,27 +508,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -540,26 +542,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -734,8 +716,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile index ea4d3eea4..694019e44 100644 --- a/Demos/Device/ClassDriver/MIDI/makefile +++ b/Demos/Device/ClassDriver/MIDI/makefile @@ -464,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -507,27 +507,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -539,26 +541,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -733,8 +715,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/ClassDriver/MassStorage/makefile b/Demos/Device/ClassDriver/MassStorage/makefile index e79258c31..15fc6f1b8 100644 --- a/Demos/Device/ClassDriver/MassStorage/makefile +++ b/Demos/Device/ClassDriver/MassStorage/makefile @@ -466,7 +466,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -509,27 +509,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -541,26 +543,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -735,8 +717,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/ClassDriver/Mouse/makefile b/Demos/Device/ClassDriver/Mouse/makefile index 67864d613..7b1cd5b8d 100644 --- a/Demos/Device/ClassDriver/Mouse/makefile +++ b/Demos/Device/ClassDriver/Mouse/makefile @@ -466,7 +466,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -509,27 +509,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -541,26 +543,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -735,8 +717,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/ClassDriver/RNDISEthernet/makefile b/Demos/Device/ClassDriver/RNDISEthernet/makefile index 8a7b49b31..60a07ce78 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/makefile +++ b/Demos/Device/ClassDriver/RNDISEthernet/makefile @@ -475,7 +475,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -518,27 +518,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -550,26 +552,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -744,8 +726,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/ClassDriver/USBtoSerial/makefile b/Demos/Device/ClassDriver/USBtoSerial/makefile index a830ec354..930652746 100644 --- a/Demos/Device/ClassDriver/USBtoSerial/makefile +++ b/Demos/Device/ClassDriver/USBtoSerial/makefile @@ -465,7 +465,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -508,27 +508,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -540,26 +542,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -734,8 +716,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/Incomplete/Sideshow/makefile b/Demos/Device/Incomplete/Sideshow/makefile index aa44b24ef..1754388f0 100644 --- a/Demos/Device/Incomplete/Sideshow/makefile +++ b/Demos/Device/Incomplete/Sideshow/makefile @@ -469,7 +469,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -512,27 +512,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -544,26 +546,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -738,8 +720,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile index 36eafefcb..d1d946ceb 100644 --- a/Demos/Device/LowLevel/AudioInput/makefile +++ b/Demos/Device/LowLevel/AudioInput/makefile @@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -506,27 +506,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -538,26 +540,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.c b/Demos/Device/LowLevel/AudioOutput/AudioOutput.c index 2b2cdcbbf..c814c8ce5 100644 --- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.c +++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.c @@ -210,8 +210,10 @@ void USB_Audio_Task(void) int8_t LeftSample_8Bit = (LeftSample_16Bit >> 8); int8_t RightSample_8Bit = (RightSample_16Bit >> 8); +#if !defined(AUDIO_OUT_STEREO) /* Mix the two channels together to produce a mono, 8-bit sample */ int8_t MixedSample_8Bit = (((int16_t)LeftSample_8Bit + (int16_t)RightSample_8Bit) >> 1); +#endif #if defined(AUDIO_OUT_MONO) /* Load the sample into the PWM timer channel */ diff --git a/Demos/Device/LowLevel/AudioOutput/makefile b/Demos/Device/LowLevel/AudioOutput/makefile index 9505fde0b..e3499b40a 100644 --- a/Demos/Device/LowLevel/AudioOutput/makefile +++ b/Demos/Device/LowLevel/AudioOutput/makefile @@ -464,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -507,27 +507,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -539,26 +541,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -733,8 +715,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/LowLevel/CDC/makefile b/Demos/Device/LowLevel/CDC/makefile index 4990559fd..80821ad6b 100644 --- a/Demos/Device/LowLevel/CDC/makefile +++ b/Demos/Device/LowLevel/CDC/makefile @@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -506,27 +506,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -538,26 +540,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/LowLevel/DualCDC/makefile b/Demos/Device/LowLevel/DualCDC/makefile index 99da8cf42..117fdbd83 100644 --- a/Demos/Device/LowLevel/DualCDC/makefile +++ b/Demos/Device/LowLevel/DualCDC/makefile @@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -506,27 +506,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -538,26 +540,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/LowLevel/GenericHID/makefile b/Demos/Device/LowLevel/GenericHID/makefile index 407536c7f..a6130c35d 100644 --- a/Demos/Device/LowLevel/GenericHID/makefile +++ b/Demos/Device/LowLevel/GenericHID/makefile @@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -506,27 +506,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -538,26 +540,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/LowLevel/Joystick/makefile b/Demos/Device/LowLevel/Joystick/makefile index b418ba222..0510a6992 100644 --- a/Demos/Device/LowLevel/Joystick/makefile +++ b/Demos/Device/LowLevel/Joystick/makefile @@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -506,27 +506,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -538,26 +540,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/LowLevel/Keyboard/makefile b/Demos/Device/LowLevel/Keyboard/makefile index af351c099..d0a87a2c9 100644 --- a/Demos/Device/LowLevel/Keyboard/makefile +++ b/Demos/Device/LowLevel/Keyboard/makefile @@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -506,27 +506,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -538,26 +540,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/LowLevel/KeyboardMouse/makefile b/Demos/Device/LowLevel/KeyboardMouse/makefile index 9474f89a6..597658e6c 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/makefile +++ b/Demos/Device/LowLevel/KeyboardMouse/makefile @@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -506,27 +506,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -538,26 +540,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/LowLevel/MIDI/makefile b/Demos/Device/LowLevel/MIDI/makefile index 1f0d8159e..1789c396e 100644 --- a/Demos/Device/LowLevel/MIDI/makefile +++ b/Demos/Device/LowLevel/MIDI/makefile @@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -506,27 +506,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -538,26 +540,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/LowLevel/MassStorage/makefile b/Demos/Device/LowLevel/MassStorage/makefile index b98541097..6d3fb0a04 100644 --- a/Demos/Device/LowLevel/MassStorage/makefile +++ b/Demos/Device/LowLevel/MassStorage/makefile @@ -465,7 +465,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -508,27 +508,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -540,26 +542,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -734,8 +716,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/LowLevel/Mouse/makefile b/Demos/Device/LowLevel/Mouse/makefile index 9ed44c3ff..beb76ab8b 100644 --- a/Demos/Device/LowLevel/Mouse/makefile +++ b/Demos/Device/LowLevel/Mouse/makefile @@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -506,27 +506,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -538,26 +540,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/LowLevel/RNDISEthernet/makefile b/Demos/Device/LowLevel/RNDISEthernet/makefile index f060c662e..612718e63 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/makefile +++ b/Demos/Device/LowLevel/RNDISEthernet/makefile @@ -476,7 +476,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -519,27 +519,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -551,26 +553,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -745,8 +727,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Device/LowLevel/USBtoSerial/makefile b/Demos/Device/LowLevel/USBtoSerial/makefile index 8e989d52c..9a08fb4dd 100644 --- a/Demos/Device/LowLevel/USBtoSerial/makefile +++ b/Demos/Device/LowLevel/USBtoSerial/makefile @@ -464,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -507,27 +507,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -539,26 +541,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -733,8 +715,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Host/ClassDriver/CDCHost/makefile b/Demos/Host/ClassDriver/CDCHost/makefile index 7c12beae1..4dd06ebee 100644 --- a/Demos/Host/ClassDriver/CDCHost/makefile +++ b/Demos/Host/ClassDriver/CDCHost/makefile @@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -506,27 +506,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -538,26 +540,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Host/ClassDriver/MouseHost/makefile b/Demos/Host/ClassDriver/MouseHost/makefile index 300d9b943..0cd3489c6 100644 --- a/Demos/Host/ClassDriver/MouseHost/makefile +++ b/Demos/Host/ClassDriver/MouseHost/makefile @@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -506,27 +506,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -538,26 +540,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Host/Incomplete/BluetoothHost/makefile b/Demos/Host/Incomplete/BluetoothHost/makefile index bf63aee47..28f64e223 100644 --- a/Demos/Host/Incomplete/BluetoothHost/makefile +++ b/Demos/Host/Incomplete/BluetoothHost/makefile @@ -466,7 +466,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -509,27 +509,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -541,26 +543,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -735,8 +717,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Host/LowLevel/CDCHost/makefile b/Demos/Host/LowLevel/CDCHost/makefile index a15fbf3de..b108bb51d 100644 --- a/Demos/Host/LowLevel/CDCHost/makefile +++ b/Demos/Host/LowLevel/CDCHost/makefile @@ -462,7 +462,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -505,27 +505,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -537,26 +539,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -731,8 +713,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Host/LowLevel/GenericHIDHost/makefile b/Demos/Host/LowLevel/GenericHIDHost/makefile index a008c2c20..1e3dd343d 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/makefile +++ b/Demos/Host/LowLevel/GenericHIDHost/makefile @@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -506,27 +506,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -538,26 +540,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Host/LowLevel/KeyboardHost/makefile b/Demos/Host/LowLevel/KeyboardHost/makefile index f45366c3b..ececa9fb5 100644 --- a/Demos/Host/LowLevel/KeyboardHost/makefile +++ b/Demos/Host/LowLevel/KeyboardHost/makefile @@ -462,7 +462,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -505,27 +505,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -537,26 +539,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -731,8 +713,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile index a322b841c..bb5a21dae 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile @@ -464,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -507,27 +507,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -539,26 +541,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -733,8 +715,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Host/LowLevel/MassStorageHost/makefile b/Demos/Host/LowLevel/MassStorageHost/makefile index d44ead5f4..6993d3ca9 100644 --- a/Demos/Host/LowLevel/MassStorageHost/makefile +++ b/Demos/Host/LowLevel/MassStorageHost/makefile @@ -464,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -507,27 +507,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -539,26 +541,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -733,8 +715,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Host/LowLevel/MouseHost/makefile b/Demos/Host/LowLevel/MouseHost/makefile index 58931ced1..ca6735edc 100644 --- a/Demos/Host/LowLevel/MouseHost/makefile +++ b/Demos/Host/LowLevel/MouseHost/makefile @@ -462,7 +462,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -505,27 +505,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -537,26 +539,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -731,8 +713,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Host/LowLevel/MouseHostWithParser/makefile b/Demos/Host/LowLevel/MouseHostWithParser/makefile index 13adc1421..bb2349d72 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/makefile +++ b/Demos/Host/LowLevel/MouseHostWithParser/makefile @@ -464,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -507,27 +507,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -539,26 +541,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -733,8 +715,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Host/LowLevel/PrinterHost/makefile b/Demos/Host/LowLevel/PrinterHost/makefile index a56d9f2a8..371f814ab 100644 --- a/Demos/Host/LowLevel/PrinterHost/makefile +++ b/Demos/Host/LowLevel/PrinterHost/makefile @@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -506,27 +506,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -538,26 +540,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/Host/LowLevel/StillImageHost/makefile b/Demos/Host/LowLevel/StillImageHost/makefile index 186d57e0c..7b3cf16ff 100644 --- a/Demos/Host/LowLevel/StillImageHost/makefile +++ b/Demos/Host/LowLevel/StillImageHost/makefile @@ -462,7 +462,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -505,27 +505,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -537,26 +539,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -731,8 +713,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/OTG/TestApp/makefile b/Demos/OTG/TestApp/makefile index 763838e3e..14ebf4a50 100644 --- a/Demos/OTG/TestApp/makefile +++ b/Demos/OTG/TestApp/makefile @@ -462,7 +462,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -505,27 +505,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -537,26 +539,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -731,8 +713,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Projects/Benito/makefile b/Projects/Benito/makefile index a785788c7..634d56bb9 100644 --- a/Projects/Benito/makefile +++ b/Projects/Benito/makefile @@ -469,7 +469,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -512,27 +512,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -544,26 +546,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -738,8 +720,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Projects/Magstripe/makefile b/Projects/Magstripe/makefile index dda15ac7c..b308d833c 100644 --- a/Projects/Magstripe/makefile +++ b/Projects/Magstripe/makefile @@ -473,7 +473,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -516,27 +516,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -548,26 +550,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -742,8 +724,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee \ No newline at end of file diff --git a/Projects/MissileLauncher/makefile b/Projects/MissileLauncher/makefile index 8c29bcf7f..867b57a4b 100644 --- a/Projects/MissileLauncher/makefile +++ b/Projects/MissileLauncher/makefile @@ -463,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -506,27 +506,29 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- + @echo -------- Unhooked LUFA Events -------- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ------------------------------------ + @echo -------------------------------------- -checklibmode: +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- -checkboard: +showtarget: @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- # Display compiler version information. gccversion : @@ -538,26 +540,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -732,8 +714,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen dfu flip \ +flip-ee dfu-ee -- GitLab