diff --git a/Demos/Host/LowLevel/makefile b/Demos/Host/LowLevel/makefile
index 2a1caed5e831bf6e17a73a9324127c7cea0eee18..2dec7c85b1d6c968d5de895b626e471b511b2e83 100644
--- a/Demos/Host/LowLevel/makefile
+++ b/Demos/Host/LowLevel/makefile
@@ -38,12 +38,12 @@ all:
 	$(MAKE) -C PrinterHost clean
 	$(MAKE) -C PrinterHost all
 
-	$(MAKE) -C StillImageHost clean
-	$(MAKE) -C StillImageHost all
-
 	$(MAKE) -C RNDISEthernetHost clean
 	$(MAKE) -C RNDISEthernetHost all
 
+	$(MAKE) -C StillImageHost clean
+	$(MAKE) -C StillImageHost all
+
 	$(MAKE) -C VirtualSerialHost clean
 	$(MAKE) -C VirtualSerialHost all
 
@@ -57,6 +57,6 @@ all:
 	$(MAKE) -C MouseHost $@
 	$(MAKE) -C MouseHostWithParser $@
 	$(MAKE) -C PrinterHost $@
-	$(MAKE) -C StillImageHost $@
 	$(MAKE) -C RNDISEthernetHost $@
+	$(MAKE) -C StillImageHost $@
 	$(MAKE) -C VirtualSerialHost $@
diff --git a/Projects/Benito/Benito.c b/Projects/Benito/Benito.c
index 834554b4fca0f0e2b585ba57321441ab32d5e6e9..23786fb9e0ec7c7a6628e37a811adb97c5ef1836 100644
--- a/Projects/Benito/Benito.c
+++ b/Projects/Benito/Benito.c
@@ -236,17 +236,17 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
 	}
 	
 	/* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */
-	UCSR1A = 0;
 	UCSR1B = 0;
+	UCSR1A = 0;
 	UCSR1C = 0;
 
 	/* Set the new baud rate before configuring the USART */
 	UBRR1  = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
 	
 	/* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */
+	UCSR1C = ConfigMask;
 	UCSR1A = (1 << U2X1);	
 	UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
-	UCSR1C = ConfigMask;
 }
 
 /** ISR to manage the reception of data from the serial port, placing received bytes into a circular buffer
diff --git a/Projects/USBtoSerial/USBtoSerial.c b/Projects/USBtoSerial/USBtoSerial.c
index b59a3648fdf37833a09f607ecd8f84e7a045df5a..2c2d0c0069a6813c710c115e2022c2264a2824c8 100644
--- a/Projects/USBtoSerial/USBtoSerial.c
+++ b/Projects/USBtoSerial/USBtoSerial.c
@@ -200,15 +200,15 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
 	}
 
 	/* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */
-	UCSR1A = 0;
 	UCSR1B = 0;
+	UCSR1A = 0;
 	UCSR1C = 0;
 
 	/* Set the new baud rate before configuring the USART */
 	UBRR1  = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
 	
 	/* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */
+	UCSR1C = ConfigMask;
 	UCSR1A = (1 << U2X1);	
 	UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
-	UCSR1C = ConfigMask;
 }