From 80e278acde4ef31a2742f49639e2053ffb0dd975 Mon Sep 17 00:00:00 2001 From: Dean Camera <dean@fourwalledcubicle.com> Date: Sun, 13 May 2012 19:10:46 +0000 Subject: [PATCH] Clean up and speed up build tests by turning off expensive and slow size optimizations, and generation of assembly listings (*.lst) for each compiled source file. --- BuildTests/BoardDriverTest/makefile | 26 ++++----- BuildTests/BoardDriverTest/makefile.avr8 | 9 +-- BuildTests/BoardDriverTest/makefile.uc3 | 9 +-- BuildTests/BoardDriverTest/makefile.xmega | 9 +-- .../BootloaderTest/BootloaderDeviceMap.cfg | 58 +++++++++---------- BuildTests/BootloaderTest/makefile | 28 ++++----- BuildTests/ModuleTest/makefile.avr8 | 9 +-- BuildTests/ModuleTest/makefile.uc3 | 9 +-- BuildTests/ModuleTest/makefile.xmega | 9 +-- BuildTests/SingleUSBModeTest/makefile.avr8 | 9 +-- BuildTests/SingleUSBModeTest/makefile.uc3 | 9 +-- BuildTests/SingleUSBModeTest/makefile.xmega | 9 +-- LUFA/CodeTemplates/makefile_template.uc3 | 7 ++- 13 files changed, 106 insertions(+), 94 deletions(-) diff --git a/BuildTests/BoardDriverTest/makefile b/BuildTests/BoardDriverTest/makefile index bc4d55977..68180c221 100644 --- a/BuildTests/BoardDriverTest/makefile +++ b/BuildTests/BoardDriverTest/makefile @@ -31,23 +31,23 @@ makeboardlist: testboards: @echo "buildtest:" > BuildMakefile - @while read line; \ - do \ - build_cfg=`grep "$$line " BoardDeviceMap.cfg | sed 's/ //g' | grep -v "#" | cut -d'=' -f2-`; \ - \ - build_board=$$line; \ - build_arch=`echo $$build_cfg | cut -d':' -f1`; \ - build_mcu=`echo $$build_cfg | cut -d':' -f2`; \ - \ - if ( test -z "$$build_cfg" ); then \ - echo "No matching information set for board $$build_board"; \ - else \ + @while read line; \ + do \ + build_cfg=`grep "$$line " BoardDeviceMap.cfg | grep -v "#" | cut -d'=' -f2- | sed 's/ //g'`; \ + \ + build_board=$$line; \ + build_arch=`echo $$build_cfg | cut -d':' -f1`; \ + build_mcu=`echo $$build_cfg | cut -d':' -f2`; \ + \ + if ( test -z "$$build_cfg" ); then \ + echo "No matching information set for board $$build_board"; \ + else \ echo "Found board configuration for $$build_board - $$build_arch, $$build_mcu"; \ - \ + \ printf "\t@echo Building dummy project for $$build_board...\n" >> BuildMakefile; \ printf "\tmake -s -f makefile.%s clean\n" $$build_arch >> BuildMakefile; \ printf "\tmake -s -f makefile.%s MCU=%s BOARD=%s elf\n\n" $$build_arch $$build_mcu $$build_board >> BuildMakefile; \ - fi; \ + fi; \ done < BoardList.txt $(MAKE) -f BuildMakefile buildtest diff --git a/BuildTests/BoardDriverTest/makefile.avr8 b/BuildTests/BoardDriverTest/makefile.avr8 index 1f0d7596f..eed8b305d 100644 --- a/BuildTests/BoardDriverTest/makefile.avr8 +++ b/BuildTests/BoardDriverTest/makefile.avr8 @@ -149,7 +149,7 @@ ASRC = # Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = s +OPT = 1 # Debugging format. @@ -222,7 +222,7 @@ CFLAGS += -Wstrict-prototypes #CFLAGS += -Wundef #CFLAGS += -Wunreachable-code #CFLAGS += -Wsign-compare -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) CFLAGS += $(CSTANDARD) @@ -249,7 +249,7 @@ CPPFLAGS += -Wundef #CPPFLAGS += -Wstrict-prototypes #CPPFLAGS += -Wunreachable-code #CPPFLAGS += -Wsign-compare -CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) #CPPFLAGS += $(CSTANDARD) @@ -263,7 +263,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # files -- see avr-libc docs [FIXME: not yet described there] # -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 +ASFLAGS = $(ADEFS) +#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 #---------------- Library Options ---------------- diff --git a/BuildTests/BoardDriverTest/makefile.uc3 b/BuildTests/BoardDriverTest/makefile.uc3 index 7e75b5479..8f307b1ee 100644 --- a/BuildTests/BoardDriverTest/makefile.uc3 +++ b/BuildTests/BoardDriverTest/makefile.uc3 @@ -123,7 +123,7 @@ ASRC = # Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = s +OPT = 1 # List any extra directories to look for include files here. @@ -185,7 +185,7 @@ CFLAGS += -fno-strict-aliasing CFLAGS += -Wall CFLAGS += -Wstrict-prototypes CFLAGS += -masm-addr-pseudos -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) CFLAGS += $(CSTANDARD) @@ -208,7 +208,7 @@ CPPFLAGS += -fno-exceptions CPPFLAGS += -masm-addr-pseudos CPPFLAGS += -Wall CPPFLAGS += -Wundef -CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) #CPPFLAGS += $(CSTANDARD) @@ -222,7 +222,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # files -- see avr-libc docs [FIXME: not yet described there] # -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 +ASFLAGS = $(ADEFS) +#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 #---------------- Linker Options ---------------- diff --git a/BuildTests/BoardDriverTest/makefile.xmega b/BuildTests/BoardDriverTest/makefile.xmega index 5a048b8e3..3c46efafd 100644 --- a/BuildTests/BoardDriverTest/makefile.xmega +++ b/BuildTests/BoardDriverTest/makefile.xmega @@ -140,7 +140,7 @@ ASRC = # Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = s +OPT = 1 # List any extra directories to look for include files here. @@ -207,7 +207,7 @@ CFLAGS += -fshort-enums CFLAGS += -fno-strict-aliasing CFLAGS += -Wall CFLAGS += -Wstrict-prototypes -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) CFLAGS += $(CSTANDARD) @@ -231,7 +231,7 @@ CPPFLAGS += -fno-strict-aliasing CPPFLAGS += -fno-exceptions CPPFLAGS += -Wall CPPFLAGS += -Wundef -CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) #CPPFLAGS += $(CSTANDARD) @@ -245,7 +245,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # files -- see avr-libc docs [FIXME: not yet described there] # -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 +ASFLAGS = $(ADEFS) +#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 #---------------- Library Options ---------------- diff --git a/BuildTests/BootloaderTest/BootloaderDeviceMap.cfg b/BuildTests/BootloaderTest/BootloaderDeviceMap.cfg index 8cb5d28dd..8a023f55c 100644 --- a/BuildTests/BootloaderTest/BootloaderDeviceMap.cfg +++ b/BuildTests/BootloaderTest/BootloaderDeviceMap.cfg @@ -2,42 +2,42 @@ # # ------------ CDC Bootloader ------------- CDC = avr8 : at90usb1287 : NONE : 128 : 8 : -CDC = avr8 : at90usb647 : NONE : 64 : 4 : +CDC = avr8 : at90usb647 : NONE : 64 : 4 : CDC = avr8 : at90usb1286 : NONE : 128 : 8 : -CDC = avr8 : at90usb646 : NONE : 64 : 4 : -CDC = avr8 : atmega32u4 : NONE : 32 : 4 : -CDC = avr8 : atmega16u4 : NONE : 16 : 4 : -CDC = avr8 : atmega32u2 : NONE : 32 : 4 : -CDC = avr8 : atmega16u2 : NONE : 16 : 4 : -CDC = avr8 : atmega8u2 : NONE : 8 : 4 : -CDC = avr8 : at90usb162 : NONE : 16 : 4 : -CDC = avr8 : at90usb82 : NONE : 8 : 4 : +CDC = avr8 : at90usb646 : NONE : 64 : 4 : +CDC = avr8 : atmega32u4 : NONE : 32 : 4 : +CDC = avr8 : atmega16u4 : NONE : 16 : 4 : +CDC = avr8 : atmega32u2 : NONE : 32 : 4 : +CDC = avr8 : atmega16u2 : NONE : 16 : 4 : +CDC = avr8 : atmega8u2 : NONE : 8 : 4 : +CDC = avr8 : at90usb162 : NONE : 16 : 4 : +CDC = avr8 : at90usb82 : NONE : 8 : 4 : # # ------------ DFU Bootloader ------------- DFU = avr8 : at90usb1287 : NONE : 128 : 8 : -DFU = avr8 : at90usb647 : NONE : 64 : 4 : +DFU = avr8 : at90usb647 : NONE : 64 : 4 : DFU = avr8 : at90usb1286 : NONE : 128 : 8 : -DFU = avr8 : at90usb646 : NONE : 64 : 4 : -DFU = avr8 : atmega32u6 : NONE : 32 : 4 : -DFU = avr8 : atmega32u4 : NONE : 32 : 4 : -DFU = avr8 : atmega16u4 : NONE : 16 : 4 : -DFU = avr8 : atmega32u2 : NONE : 32 : 4 : -DFU = avr8 : atmega16u2 : NONE : 16 : 4 : -DFU = avr8 : atmega8u2 : NONE : 8 : 4 : -DFU = avr8 : at90usb162 : NONE : 16 : 4 : -DFU = avr8 : at90usb82 : NONE : 8 : 4 : +DFU = avr8 : at90usb646 : NONE : 64 : 4 : +DFU = avr8 : atmega32u6 : NONE : 32 : 4 : +DFU = avr8 : atmega32u4 : NONE : 32 : 4 : +DFU = avr8 : atmega16u4 : NONE : 16 : 4 : +DFU = avr8 : atmega32u2 : NONE : 32 : 4 : +DFU = avr8 : atmega16u2 : NONE : 16 : 4 : +DFU = avr8 : atmega8u2 : NONE : 8 : 4 : +DFU = avr8 : at90usb162 : NONE : 16 : 4 : +DFU = avr8 : at90usb82 : NONE : 8 : 4 : # # ------------ HID Bootloader ------------- HID = avr8 : at90usb1287 : NONE : 128 : 4 : -HID = avr8 : at90usb647 : NONE : 64 : 4 : +HID = avr8 : at90usb647 : NONE : 64 : 4 : HID = avr8 : at90usb1286 : NONE : 128 : 4 : -HID = avr8 : at90usb646 : NONE : 64 : 4 : -HID = avr8 : atmega32u6 : NONE : 32 : 4 : -HID = avr8 : atmega32u4 : NONE : 32 : 4 : -HID = avr8 : atmega16u4 : NONE : 16 : 4 : -HID = avr8 : atmega32u2 : NONE : 32 : 2 : -HID = avr8 : atmega16u2 : NONE : 16 : 2 : -HID = avr8 : atmega8u2 : NONE : 8 : 2 : -HID = avr8 : at90usb162 : NONE : 16 : 2 : -HID = avr8 : at90usb82 : NONE : 8 : 2 : +HID = avr8 : at90usb646 : NONE : 64 : 4 : +HID = avr8 : atmega32u6 : NONE : 32 : 4 : +HID = avr8 : atmega32u4 : NONE : 32 : 4 : +HID = avr8 : atmega16u4 : NONE : 16 : 4 : +HID = avr8 : atmega32u2 : NONE : 32 : 2 : +HID = avr8 : atmega16u2 : NONE : 16 : 2 : +HID = avr8 : atmega8u2 : NONE : 8 : 2 : +HID = avr8 : at90usb162 : NONE : 16 : 2 : +HID = avr8 : at90usb82 : NONE : 8 : 2 : # \ No newline at end of file diff --git a/BuildTests/BootloaderTest/makefile b/BuildTests/BootloaderTest/makefile index 7ce56c49f..5b378ec99 100644 --- a/BuildTests/BootloaderTest/makefile +++ b/BuildTests/BootloaderTest/makefile @@ -27,24 +27,26 @@ end: testbootloaders: @echo "buildtest:" > BuildMakefile - @while read line; \ - do \ - build_cfg=`echo $$line | sed 's/ //g' | grep -v "#"`; \ - \ - if ( test -n "$$build_cfg" ); then \ + @while read line; \ + do \ + build_cfg=`echo $$line | grep -v "#" | sed 's/ //g'`; \ + \ + if ( test -n "$$build_cfg" ); then \ build_bootloader=`echo $$build_cfg | cut -d'=' -f1`; \ - build_arch=`echo $$build_cfg | cut -d'=' -f2- | cut -d':' -f1`; \ - build_mcu=`echo $$build_cfg | cut -d'=' -f2- | cut -d':' -f2`; \ - build_board=`echo $$build_cfg | cut -d'=' -f2- | cut -d':' -f3`; \ - build_flashsize=`echo $$build_cfg | cut -d'=' -f2- | cut -d':' -f4`; \ - build_bootsize=`echo $$build_cfg | cut -d'=' -f2- | cut -d':' -f5`; \ - \ + build_cfg=`echo $$build_cfg | cut -d'=' -f2-`; \ + \ + build_arch=`echo $$build_cfg | cut -d':' -f1`; \ + build_mcu=`echo $$build_cfg | cut -d':' -f2`; \ + build_board=`echo $$build_cfg | cut -d':' -f3`; \ + build_flashsize=`echo $$build_cfg | cut -d':' -f4`; \ + build_bootsize=`echo $$build_cfg | cut -d':' -f5`; \ + \ printf "Found bootloader configuration for bootloader '%s' (FLASH: %3s KB | BOOT: %3s KB | MCU: %12s / %4s)\n" $$build_bootloader $$build_flashsize $$build_bootsize $$build_mcu $$build_arch; \ - \ + \ printf "\t@echo Building bootloader %s - %s - FLASH: %s KB, BOOT: %s KB\n" $$build_bootloader $$build_mcu $$build_flashsize $$build_bootsize >> BuildMakefile; \ printf "\tmake -s -C $(LUFA_ROOT_PATH)/Bootloaders/%s/ clean\n" $$build_bootloader >> BuildMakefile; \ printf "\tmake -s -C $(LUFA_ROOT_PATH)/Bootloaders/%s/ MCU=%s BOARD=%s FLASH_SIZE_KB=%s BOOT_SECTION_SIZE_KB=%s elf\n\n" $$build_bootloader $$build_mcu $$build_board $$build_flashsize $$build_bootsize >> BuildMakefile; \ - fi; \ + fi; \ done < BootloaderDeviceMap.cfg $(MAKE) -f BuildMakefile buildtest diff --git a/BuildTests/ModuleTest/makefile.avr8 b/BuildTests/ModuleTest/makefile.avr8 index 360b1ee8b..89f4e4626 100644 --- a/BuildTests/ModuleTest/makefile.avr8 +++ b/BuildTests/ModuleTest/makefile.avr8 @@ -154,7 +154,7 @@ ASRC = Dummy.S # Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = s +OPT = 1 # Debugging format. @@ -220,7 +220,7 @@ CFLAGS += -fpack-struct CFLAGS += -fshort-enums CFLAGS += -fno-strict-aliasing CFLAGS += -fno-split-wide-types -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) CFLAGS += $(CSTANDARD) CFLAGS += -Werror @@ -268,7 +268,7 @@ CPPFLAGS += -fshort-enums CPPFLAGS += -fno-exceptions CPPFLAGS += -Wall CPPFLAGS += -Wundef -CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) @@ -281,7 +281,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # files -- see avr-libc docs [FIXME: not yet described there] # -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 +ASFLAGS = $(ADEFS) +#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 #---------------- Library Options ---------------- diff --git a/BuildTests/ModuleTest/makefile.uc3 b/BuildTests/ModuleTest/makefile.uc3 index 05b8d583b..15945a5b1 100644 --- a/BuildTests/ModuleTest/makefile.uc3 +++ b/BuildTests/ModuleTest/makefile.uc3 @@ -126,7 +126,7 @@ ASRC = Dummy.S \ # Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = s +OPT = 1 # List any extra directories to look for include files here. @@ -186,7 +186,7 @@ CFLAGS += -funsigned-bitfields CFLAGS += -ffunction-sections CFLAGS += -fno-strict-aliasing CFLAGS += -masm-addr-pseudos -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) CFLAGS += $(CSTANDARD) CFLAGS += -Werror @@ -235,7 +235,7 @@ CPPFLAGS += -fno-exceptions CPPFLAGS += -masm-addr-pseudos CPPFLAGS += -Wall CPPFLAGS += -Wundef -CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) #CPPFLAGS += $(CSTANDARD) @@ -249,7 +249,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # files -- see avr-libc docs [FIXME: not yet described there] # -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst) +ASFLAGS = $(ADEFS) +#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 #---------------- Linker Options ---------------- diff --git a/BuildTests/ModuleTest/makefile.xmega b/BuildTests/ModuleTest/makefile.xmega index de27630dc..75d0b3a8d 100644 --- a/BuildTests/ModuleTest/makefile.xmega +++ b/BuildTests/ModuleTest/makefile.xmega @@ -143,7 +143,7 @@ ASRC = Dummy.S # Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = s +OPT = 1 # List any extra directories to look for include files here. @@ -209,7 +209,7 @@ CFLAGS += -fpack-struct CFLAGS += -fshort-enums CFLAGS += -fno-strict-aliasing CFLAGS += -fno-split-wide-types -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) CFLAGS += $(CSTANDARD) CFLAGS += -Werror @@ -259,7 +259,7 @@ CPPFLAGS += -fno-strict-aliasing CPPFLAGS += -fno-exceptions CPPFLAGS += -Wall CPPFLAGS += -Wundef -CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) #CPPFLAGS += $(CSTANDARD) @@ -273,7 +273,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # files -- see avr-libc docs [FIXME: not yet described there] # -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 +ASFLAGS = $(ADEFS) +#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 #---------------- Library Options ---------------- diff --git a/BuildTests/SingleUSBModeTest/makefile.avr8 b/BuildTests/SingleUSBModeTest/makefile.avr8 index fc0f54b66..1f0e77e10 100644 --- a/BuildTests/SingleUSBModeTest/makefile.avr8 +++ b/BuildTests/SingleUSBModeTest/makefile.avr8 @@ -150,7 +150,7 @@ ASRC = Dummy.S # Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = s +OPT = 1 # Debugging format. @@ -223,7 +223,7 @@ CFLAGS += -Wstrict-prototypes #CFLAGS += -Wundef #CFLAGS += -Wunreachable-code #CFLAGS += -Wsign-compare -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) CFLAGS += $(CSTANDARD) @@ -250,7 +250,7 @@ CPPFLAGS += -Wundef #CPPFLAGS += -Wstrict-prototypes #CPPFLAGS += -Wunreachable-code #CPPFLAGS += -Wsign-compare -CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) #CPPFLAGS += $(CSTANDARD) @@ -264,7 +264,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # files -- see avr-libc docs [FIXME: not yet described there] # -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 +ASFLAGS = $(ADEFS) +#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 #---------------- Library Options ---------------- diff --git a/BuildTests/SingleUSBModeTest/makefile.uc3 b/BuildTests/SingleUSBModeTest/makefile.uc3 index 4bc729aed..bcf883047 100644 --- a/BuildTests/SingleUSBModeTest/makefile.uc3 +++ b/BuildTests/SingleUSBModeTest/makefile.uc3 @@ -124,7 +124,7 @@ ASRC = Dummy.S # Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = s +OPT = 1 # List any extra directories to look for include files here. @@ -186,7 +186,7 @@ CFLAGS += -fno-strict-aliasing CFLAGS += -Wall CFLAGS += -Wstrict-prototypes CFLAGS += -masm-addr-pseudos -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) CFLAGS += $(CSTANDARD) @@ -209,7 +209,7 @@ CPPFLAGS += -fno-exceptions CPPFLAGS += -masm-addr-pseudos CPPFLAGS += -Wall CPPFLAGS += -Wundef -CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) #CPPFLAGS += $(CSTANDARD) @@ -223,7 +223,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # files -- see avr-libc docs [FIXME: not yet described there] # -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 +ASFLAGS = $(ADEFS) +#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 #---------------- Linker Options ---------------- diff --git a/BuildTests/SingleUSBModeTest/makefile.xmega b/BuildTests/SingleUSBModeTest/makefile.xmega index e3ad8f401..d2bf3778e 100644 --- a/BuildTests/SingleUSBModeTest/makefile.xmega +++ b/BuildTests/SingleUSBModeTest/makefile.xmega @@ -141,7 +141,7 @@ ASRC = Dummy.S # Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = s +OPT = 1 # List any extra directories to look for include files here. @@ -208,7 +208,7 @@ CFLAGS += -fshort-enums CFLAGS += -fno-strict-aliasing CFLAGS += -Wall CFLAGS += -Wstrict-prototypes -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) CFLAGS += $(CSTANDARD) @@ -232,7 +232,7 @@ CPPFLAGS += -fno-strict-aliasing CPPFLAGS += -fno-exceptions CPPFLAGS += -Wall CPPFLAGS += -Wundef -CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) #CPPFLAGS += $(CSTANDARD) @@ -246,7 +246,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # files -- see avr-libc docs [FIXME: not yet described there] # -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 +ASFLAGS = $(ADEFS) +#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 #---------------- Library Options ---------------- diff --git a/LUFA/CodeTemplates/makefile_template.uc3 b/LUFA/CodeTemplates/makefile_template.uc3 index 982576064..a73e7d46b 100644 --- a/LUFA/CodeTemplates/makefile_template.uc3 +++ b/LUFA/CodeTemplates/makefile_template.uc3 @@ -188,7 +188,7 @@ CFLAGS += -fno-strict-aliasing CFLAGS += -Wall CFLAGS += -Wstrict-prototypes CFLAGS += -masm-addr-pseudos -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) CFLAGS += $(CSTANDARD) @@ -211,7 +211,7 @@ CPPFLAGS += -fno-exceptions CPPFLAGS += -masm-addr-pseudos CPPFLAGS += -Wall CPPFLAGS += -Wundef -CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) #CPPFLAGS += $(CSTANDARD) @@ -225,7 +225,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # files -- see avr-libc docs [FIXME: not yet described there] # -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 +ASFLAGS = $(ADEFS) +#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 #---------------- Linker Options ---------------- -- GitLab