diff --git a/LUFA/ManPages/ConfiguringApps.txt b/LUFA/ManPages/ConfiguringApps.txt
index 058d79b1ff98fb61243eff830f9da609f601f4c4..f601efacfa3bfe2e70912e655cfdf557622370d5 100644
--- a/LUFA/ManPages/ConfiguringApps.txt
+++ b/LUFA/ManPages/ConfiguringApps.txt
@@ -6,11 +6,11 @@
/** \page Page_ConfiguringApps Configuring the Demos, Bootloaders and Projects
*
- * If the target AVR model, clock speed, board or other settings are different to the current settings, they must be changed
+ * If the target AVR model, clock speed, board or other settings are different from the current settings, they must be changed
* and the project recompiled from the source code before being programmed into the AVR microcontroller. Most project
* configuration options are located in the "makefile" build script inside each LUFA application's folder, however some
- * demo or application-specific configuration settings (such as the output format in the AudioOut demo) are located in the
- * main .c source file of the project. See each project's individual documentation for application-specific configuration
+ * demo or application-specific configuration settings (such as the output format in the AudioOut demo) are located in one or
+ * more of the source files of the project. See each project's individual documentation for application-specific configuration
* values.
*
* Each project "makefile" contains all the script and configuration data required to compile each project. When opened with
@@ -20,7 +20,7 @@
* Inside each makefile, a number of configuration variables are located, with the format "<VARIABLE NAME> = <VALUE>". For
* each application, the important variables which should be altered are:
*
- * - <b>MCU</b>, the target AVR processor.
+ * - <b>MCU</b>, the target AVR processor
* - <b>BOARD</b>, the target board hardware
* - <b>F_CLOCK</b>, the target raw master clock frequency, before any prescaling is performed
* - <b>F_CPU</b>, the target AVR CPU master clock frequency, after any prescaling
@@ -35,7 +35,7 @@
* (such as the AT90USB1287, or the ATMEGA32U4), in all lower-case (e.g. "at90usb1287"). Note that not all demos support all the
* USB AVR models, as they may make use of peripherals or modes only present in some devices.
*
- * For supported library AVR models, see main documentation page.
+ * For supported processor models, see \ref Page_DeviceSupport.
*
* \section Sec_BOARD The BOARD Parameter
* This parameter indicates the target AVR board hardware for the compiled application. Some LUFA library drivers are board-specific,
@@ -48,6 +48,8 @@
* directory into a /Board/ folder inside the application directory, and the stub driver completed with the appropriate code to drive the
* custom board's hardware.
*
+ * For boards with built in hardware driver support within the LUFA library, see \ref Page_DeviceSupport.
+ *
* \section Sec_F_CLOCK The F_CLOCK Parameter
* This parameter indicates the target AVR's input clock frequency, in Hz. This is the actual clock input, before any prescaling is performed. In the
* USB AVR architecture, the input clock before any prescaling is fed directly to the PLL subsystem, and thus the PLL is derived directly from the
diff --git a/LUFA/ManPages/LUFAPoweredProjects.txt b/LUFA/ManPages/LUFAPoweredProjects.txt
index 05634623d905f7e6f2b5ac517abb66b6ef4c2c9f..2d2c7da3616a3935c06250a906defc55edc85c68 100644
--- a/LUFA/ManPages/LUFAPoweredProjects.txt
+++ b/LUFA/ManPages/LUFAPoweredProjects.txt
@@ -55,6 +55,7 @@
* - Linux Secure Storage Dongle: http://github.com/TomMD/teensy
* - MakeTV Episode Dispenser: http://www.youtube.com/watch?v=BkWUi18hl3g
* - MidiMonster, a USB-to-MIDI gateway board: http://www.dorkbotpdx.org/wiki/midimonster
+ * - Mobo 4.3, a USB controlled all band (160-10m) HF SDR transceiver: http://sites.google.com/site/lofturj/mobo4_3
* - NES Controller USB modification: http://projects.peterpolidoro.net/video/NESUSB.htm
* - Opendous-JTAG, an open source ARM JTAG debugger: http://code.google.com/p/opendous-jtag/
* - Openkubus, an open source hardware-based authentication dongle: http://code.google.com/p/openkubus/
@@ -80,7 +81,6 @@
* - Penguino, an Arduino Board With On-Board LUFA Powered Debugger/Programmer: http://wiki.icy.com.au/PenguinoAVR
* - Many of Busware's Products: http://www.busware.de/
* - MIDIFighter, a USB-MIDI controller: http://www.midifighter.com/
- * - Mobo 4.3, a USB controlled all band (160-10m) HF SDR transceiver: http://sites.google.com/site/lofturj/mobo4_3
* - Retrode, a USB Games Console Cartridge Reader: http://www.retrode.org
* - USBTINY-MKII, an AVRISP-MKII Clone AVR Programmer: http://tom-itx.dyndns.org:81/~webpage/boards/USBTiny_Mkii/USBTiny_Mkii_index.php
* - XMEGA Development Board, using LUFA as an On-Board Programmer: http://xmega.mattair.net/
diff --git a/LUFA/ManPages/LibraryApps.txt b/LUFA/ManPages/LibraryApps.txt
index 787847f72e697df8deebaf90d68c8958794d3622..2a6159af3020390d20b87e4ac380ff2694504e6b 100644
--- a/LUFA/ManPages/LibraryApps.txt
+++ b/LUFA/ManPages/LibraryApps.txt
@@ -109,7 +109,6 @@
* - <b>Webserver</b> - RNDIS Host Webserver with DHCP client, powered by uIP TCP/IP stack project and FatFS library
* - <b>XPLAINBridge</b> - XPLAIN alternative PDI Programmer/USB to Serial Bridge firmware project
* - <b>Incomplete</b>
- * - <b>MIDIToneGenerator</b> - Incomplete MIDI Tone Generator application, to convert MIDI note messages into audio tones
* - <b>StandaloneProgrammer</b> - Incomplete Standalone AVR Programmer application, to program AVRs directly from a Mass Storage disk
*
* </small>
diff --git a/LUFA/ManPages/MigrationInformation.txt b/LUFA/ManPages/MigrationInformation.txt
index 54cb6ebb2c826a736284193f2825a87199241c38..c0efcbdc6173c70d57f0b910f315616f18fbd371 100644
--- a/LUFA/ManPages/MigrationInformation.txt
+++ b/LUFA/ManPages/MigrationInformation.txt
@@ -10,7 +10,7 @@
* to the next version released. It does not indicate all new additions to the library in each version change, only
* areas relevant to making older projects compatible with the API changes of each new release.
*
- * \section Sec_MigrationXXXXXX Migrating from XXXXXX to XXXXXX
+ * \section Sec_MigrationXXXXXX Migrating from 100807 to XXXXXX
* <b>USB Core</b>
* - A new USB driver source file, Drivers/USB/HighLevel/EndpointStream.c now exists. This source file should be added
* to all project makefiles using the USB driver of LUFA, or the makefile should be updated to use the new module source
diff --git a/LUFA/ManPages/VIDAndPIDValues.txt b/LUFA/ManPages/VIDAndPIDValues.txt
index 41ad5608581cddf687df9db03189e0d57474b4aa..9f4183e269bbfdb063e9bb14aabfc426537a6735 100644
--- a/LUFA/ManPages/VIDAndPIDValues.txt
+++ b/LUFA/ManPages/VIDAndPIDValues.txt
@@ -14,7 +14,7 @@
* <b>These VID/PID values should not be used in commercial designs under any circumstances.</b> Private projects
* may use the following values freely, but must accept any collisions due to other LUFA derived private projects
* sharing identical values. It is suggested that private projects using interfaces compatible with existing
- * demos share the save VID/PID value.
+ * demos share the same VID/PID value.
*
* <table>
*
diff --git a/LUFA/makefile b/LUFA/makefile
index c6ca8b4b8c5f6123d95cea4a61d4b2be25ebd723..2dbecaf8e9c70f8944d3ccf33620c67dc43f60e7 100644
--- a/LUFA/makefile
+++ b/LUFA/makefile
@@ -53,10 +53,10 @@ LUFA_SRC_SCHEDULER = $(LUFA_ROOT_PATH)/Scheduler/Scheduler.c
# Check to see if the LUFA_PATH variable has not been set (the makefile is not being included from a project makefile)
ifeq ($(origin LUFA_PATH), undefined)
- LUFA_SRC_ALL_FILES = $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) \
- $(LUFA_SRC_TEMPERATURE) $(LUFA_SRC_SERIAL) \
- $(LUFA_SRC_SERIALSTREAM) $(LUFA_SRC_TWI) \
- $(LUFA_SRC_SCHEDULER)
+ LUFA_SRC_ALL_FILES = $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) \
+ $(LUFA_SRC_TEMPERATURE) $(LUFA_SRC_SERIAL) \
+ $(LUFA_SRC_SERIALSTREAM) $(LUFA_SRC_TWI) \
+ $(LUFA_SRC_SCHEDULER)
all: