Commit a789619f authored by Dean Camera's avatar Dean Camera
Browse files

Renamed USB_Device_SetHighSpeed() to USB_Device_SetFullSpeed() so that the...

Renamed USB_Device_SetHighSpeed() to USB_Device_SetFullSpeed() so that the correct terminology is used (thanks to Brian Dickman).

Fix USB_PLL_Off() call in the series 4, 6 and 7 microcontroller disconnect interrupt handler code, which wasn't guarded by a test of USB_Options to check if the user has specified manual PLL control (thanks to Brian Dickman).
parent 7df6b956
......@@ -33,7 +33,6 @@
* Main source file for the TeensyHID bootloader. This file contains the complete bootloader logic.
*/
#define INCLUDE_FROM_TEENSYHID_C
#include "TeensyHID.h"
/* Global Variables: */
......
......@@ -93,7 +93,10 @@ ISR(USB_GEN_vect, ISR_BLOCK)
USB_Detach();
USB_CLK_Freeze();
if (!(USB_Options & USB_OPT_MANUAL_PLL))
USB_PLL_Off();
USB_REG_Off();
EVENT_USB_VBUSDisconnect();
......
......@@ -185,7 +185,7 @@
#if !defined(__DOXYGEN__)
/* Macros: */
#define USB_Device_SetLowSpeed() MACROS{ UDCON |= (1 << LSM); }MACROE
#define USB_Device_SetHighSpeed() MACROS{ UDCON &= ~(1 << LSM); }MACROE
#define USB_Device_SetFullSpeed() MACROS{ UDCON &= ~(1 << LSM); }MACROE
#endif
#endif
......
......@@ -121,6 +121,8 @@ void USB_ShutDown(void)
USB_ResetInterface();
USB_Detach();
USB_Controller_Disable();
if (!(USB_Options & USB_OPT_MANUAL_PLL))
USB_PLL_Off();
#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
......@@ -188,7 +190,7 @@ void USB_ResetInterface(void)
if (USB_Options & USB_DEVICE_OPT_LOWSPEED)
USB_Device_SetLowSpeed();
else
USB_Device_SetHighSpeed();
USB_Device_SetFullSpeed();
USB_INT_Enable(USB_INT_VBUS);
}
......
......@@ -64,6 +64,7 @@
* to only unfreeze and check one data pipe at a time) to prevent incorrect device enumerations and freezes while trasferring data
* - Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is
* cleared to prevent endpoint type corruption
* - Fixed USB_OPT_MANUAL_PLL option being ignored during device disconnects on some models (thanks to Brian Dickman)
* - Fixed documentation mentioning Pipe_GetCurrentToken() function when correct function name is Pipe_GetPipeToken()
* - Fixed ADC driver for the ATMEGA32U4 and ATMEGA16U4 (thanks to Opendous Inc.)
* - Fixed CDCHost demo unfreezing the pipes at the point of configuration, rather than use
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment