diff --git a/Demos/Host/MassStorageHost/MassStoreCommands.c b/Demos/Host/MassStorageHost/MassStoreCommands.c
index 16f1d60c1470bba8fc056e7b35beb457492e657d..95aafca8c7c1fdee139b3cacc34afb598f4b8a5b 100644
--- a/Demos/Host/MassStorageHost/MassStoreCommands.c
+++ b/Demos/Host/MassStorageHost/MassStoreCommands.c
@@ -73,7 +73,7 @@ static uint32_t MassStore_Tag = 1;
*/
static uint8_t MassStore_SendCommand(void)
{
- uint8_t ErrorCode = PIPE_RWSTREAM_ERROR_NoError;
+ uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
/* Each transmission should have a unique tag value, excluding values 0 and 0xFFFFFFFF */
if (++MassStore_Tag == 0xFFFFFFFF)
@@ -84,7 +84,7 @@ static uint8_t MassStore_SendCommand(void)
Pipe_Unfreeze();
/* Write the CBW command to the OUT pipe */
- if ((ErrorCode = Pipe_Write_Stream_LE(&SCSICommandBlock, sizeof(CommandBlockWrapper_t))) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ErrorCode = Pipe_Write_Stream_LE(&SCSICommandBlock, sizeof(CommandBlockWrapper_t))) != PIPE_RWSTREAM_NoError)
return ErrorCode;
/* Send the data in the OUT pipe to the attached device */
@@ -95,7 +95,7 @@ static uint8_t MassStore_SendCommand(void)
/* Freeze pipe after use */
Pipe_Freeze();
- return PIPE_RWSTREAM_ERROR_NoError;
+ return PIPE_RWSTREAM_NoError;
}
/** Waits until the attached device is ready to accept data following a CBW, checking
@@ -127,7 +127,7 @@ static uint8_t MassStore_WaitForDataReceived(void)
/* Check to see if the timeout period for the command has elapsed */
if (!(TimeoutMSRem))
- return PIPE_RWSTREAM_ERROR_Timeout;
+ return PIPE_RWSTREAM_Timeout;
}
Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
@@ -138,7 +138,7 @@ static uint8_t MassStore_WaitForDataReceived(void)
/* Clear the stall condition on the OUT pipe */
MassStore_ClearPipeStall(MASS_STORE_DATA_OUT_PIPE);
- return PIPE_RWSTREAM_ERROR_PipeStalled;
+ return PIPE_RWSTREAM_PipeStalled;
}
Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
@@ -149,15 +149,15 @@ static uint8_t MassStore_WaitForDataReceived(void)
/* Clear the stall condition on the IN pipe */
MassStore_ClearPipeStall(MASS_STORE_DATA_IN_PIPE);
- return PIPE_RWSTREAM_ERROR_PipeStalled;
+ return PIPE_RWSTREAM_PipeStalled;
}
/* Check to see if the device was disconnected, if so exit function */
if (!(USB_IsConnected))
- return PIPE_RWSTREAM_ERROR_DeviceDisconnected;
+ return PIPE_RWSTREAM_DeviceDisconnected;
};
- return PIPE_RWSTREAM_ERROR_NoError;
+ return PIPE_RWSTREAM_NoError;
}
/** Sends or receives the transaction's data stage to or from the attached device, reading or
@@ -169,7 +169,7 @@ static uint8_t MassStore_WaitForDataReceived(void)
*/
static uint8_t MassStore_SendReceiveData(void* BufferPtr)
{
- uint8_t ErrorCode = PIPE_RWSTREAM_ERROR_NoError;
+ uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
uint16_t BytesRem = SCSICommandBlock.Header.DataTransferLength;
/* Check the direction of the SCSI command data stage */
@@ -180,7 +180,7 @@ static uint8_t MassStore_SendReceiveData(void* BufferPtr)
Pipe_Unfreeze();
/* Read in the block data from the pipe */
- if ((ErrorCode = Pipe_Read_Stream_LE(BufferPtr, BytesRem)) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ErrorCode = Pipe_Read_Stream_LE(BufferPtr, BytesRem)) != PIPE_RWSTREAM_NoError)
return ErrorCode;
/* Acknowledge the packet */
@@ -193,7 +193,7 @@ static uint8_t MassStore_SendReceiveData(void* BufferPtr)
Pipe_Unfreeze();
/* Write the block data to the pipe */
- if ((ErrorCode = Pipe_Write_Stream_LE(BufferPtr, BytesRem)) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ErrorCode = Pipe_Write_Stream_LE(BufferPtr, BytesRem)) != PIPE_RWSTREAM_NoError)
return ErrorCode;
/* Acknowledge the packet */
@@ -205,7 +205,7 @@ static uint8_t MassStore_SendReceiveData(void* BufferPtr)
/* Freeze used pipe after use */
Pipe_Freeze();
- return PIPE_RWSTREAM_ERROR_NoError;
+ return PIPE_RWSTREAM_NoError;
}
/** Routine to receive the current CSW from the device.
@@ -214,10 +214,10 @@ static uint8_t MassStore_SendReceiveData(void* BufferPtr)
*/
static uint8_t MassStore_GetReturnedStatus(void)
{
- uint8_t ErrorCode = PIPE_RWSTREAM_ERROR_NoError;
+ uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
/* If an error in the command ocurred, abort */
- if ((ErrorCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ErrorCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
return ErrorCode;
/* Select the IN data pipe for data reception */
@@ -225,7 +225,7 @@ static uint8_t MassStore_GetReturnedStatus(void)
Pipe_Unfreeze();
/* Load in the CSW from the attached device */
- if ((ErrorCode = Pipe_Read_Stream_LE(&SCSICommandStatus, sizeof(CommandStatusWrapper_t))) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ErrorCode = Pipe_Read_Stream_LE(&SCSICommandStatus, sizeof(CommandStatusWrapper_t))) != PIPE_RWSTREAM_NoError)
return ErrorCode;
/* Clear the data ready for next reception */
@@ -234,7 +234,7 @@ static uint8_t MassStore_GetReturnedStatus(void)
/* Freeze the IN pipe after use */
Pipe_Freeze();
- return PIPE_RWSTREAM_ERROR_NoError;
+ return PIPE_RWSTREAM_NoError;
}
/** Clears the stall condition in the attached device on the nominated endpoint number.
@@ -327,7 +327,7 @@ uint8_t MassStore_GetMaxLUN(uint8_t* const MaxLUNIndex)
*/
uint8_t MassStore_RequestSense(const uint8_t LUNIndex, const SCSI_Request_Sense_Response_t* const SensePtr)
{
- uint8_t ReturnCode = PIPE_RWSTREAM_ERROR_NoError;
+ uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to issue REQUEST SENSE command */
SCSICommandBlock = (CommandBlockWrapper_t)
@@ -357,27 +357,27 @@ uint8_t MassStore_RequestSense(const uint8_t LUNIndex, const SCSI_Request_Sense_
MassStore_SendCommand();
/* Wait until data received from the device */
- if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read the returned sense data into the buffer */
- if ((ReturnCode = MassStore_SendReceiveData((uint8_t*)SensePtr)) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ReturnCode = MassStore_SendReceiveData((uint8_t*)SensePtr)) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read in the returned CSW from the device */
- if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
- return PIPE_RWSTREAM_ERROR_NoError;
+ return PIPE_RWSTREAM_NoError;
}
/** Issues a SCSI Device Block Read command to the attached device, to read in one or more data blocks from the
@@ -394,7 +394,7 @@ uint8_t MassStore_RequestSense(const uint8_t LUNIndex, const SCSI_Request_Sense_
uint8_t MassStore_ReadDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockAddress,
const uint8_t Blocks, const uint16_t BlockSize, void* BufferPtr)
{
- uint8_t ReturnCode = PIPE_RWSTREAM_ERROR_NoError;
+ uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to read in the given blocks from the device */
SCSICommandBlock = (CommandBlockWrapper_t)
@@ -428,27 +428,27 @@ uint8_t MassStore_ReadDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockAd
MassStore_SendCommand();
/* Wait until data received from the device */
- if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read the returned block data into the buffer */
- if ((ReturnCode = MassStore_SendReceiveData(BufferPtr)) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ReturnCode = MassStore_SendReceiveData(BufferPtr)) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read in the returned CSW from the device */
- if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
- return PIPE_RWSTREAM_ERROR_NoError;
+ return PIPE_RWSTREAM_NoError;
}
/** Issues a SCSI Device Block Write command to the attached device, to write one or more data blocks to the
@@ -465,7 +465,7 @@ uint8_t MassStore_ReadDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockAd
uint8_t MassStore_WriteDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockAddress,
const uint8_t Blocks, const uint16_t BlockSize, void* BufferPtr)
{
- uint8_t ReturnCode = PIPE_RWSTREAM_ERROR_NoError;
+ uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to write the given blocks to the device */
SCSICommandBlock = (CommandBlockWrapper_t)
@@ -499,20 +499,20 @@ uint8_t MassStore_WriteDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockA
MassStore_SendCommand();
/* Write the data to the device from the buffer */
- if ((ReturnCode = MassStore_SendReceiveData(BufferPtr)) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ReturnCode = MassStore_SendReceiveData(BufferPtr)) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read in the returned CSW from the device */
- if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
- return PIPE_RWSTREAM_ERROR_NoError;
+ return PIPE_RWSTREAM_NoError;
}
/** Issues a SCSI Device Test Unit Ready command to the attached device, to determine if the device is ready to accept
@@ -524,7 +524,7 @@ uint8_t MassStore_WriteDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockA
*/
uint8_t MassStore_TestUnitReady(const uint8_t LUNIndex)
{
- uint8_t ReturnCode = PIPE_RWSTREAM_ERROR_NoError;
+ uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to issue TEST UNIT READY command */
SCSICommandBlock = (CommandBlockWrapper_t)
@@ -554,13 +554,13 @@ uint8_t MassStore_TestUnitReady(const uint8_t LUNIndex)
MassStore_SendCommand();
/* Read in the returned CSW from the device */
- if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
- return PIPE_RWSTREAM_ERROR_NoError;
+ return PIPE_RWSTREAM_NoError;
}
/** Issues a SCSI Device Read Capacity command to the attached device, to determine the capacity of the
@@ -573,7 +573,7 @@ uint8_t MassStore_TestUnitReady(const uint8_t LUNIndex)
*/
uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex, SCSI_Capacity_t* const CapacityPtr)
{
- uint8_t ReturnCode = PIPE_RWSTREAM_ERROR_NoError;
+ uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to issue READ CAPACITY command */
SCSICommandBlock = (CommandBlockWrapper_t)
@@ -607,14 +607,14 @@ uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex, SCSI_Capacity_t* const Ca
MassStore_SendCommand();
/* Wait until data received from the device */
- if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read the returned capacity data into the buffer */
- if ((ReturnCode = MassStore_SendReceiveData(CapacityPtr)) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ReturnCode = MassStore_SendReceiveData(CapacityPtr)) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
@@ -625,13 +625,13 @@ uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex, SCSI_Capacity_t* const Ca
CapacityPtr->BlockSize = SwapEndian_32(CapacityPtr->BlockSize);
/* Read in the returned CSW from the device */
- if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
- return PIPE_RWSTREAM_ERROR_NoError;
+ return PIPE_RWSTREAM_NoError;
}
/** Issues a SCSI Device Prevent/Allow Medium Removal command to the attached device, to lock the physical media from
@@ -645,7 +645,7 @@ uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex, SCSI_Capacity_t* const Ca
*/
uint8_t MassStore_PreventAllowMediumRemoval(const uint8_t LUNIndex, const bool PreventRemoval)
{
- uint8_t ReturnCode = PIPE_RWSTREAM_ERROR_NoError;
+ uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to issue PREVENT ALLOW MEDIUM REMOVAL command */
SCSICommandBlock = (CommandBlockWrapper_t)
@@ -681,5 +681,5 @@ uint8_t MassStore_PreventAllowMediumRemoval(const uint8_t LUNIndex, const bool P
return ReturnCode;
}
- return PIPE_RWSTREAM_ERROR_NoError;
+ return PIPE_RWSTREAM_NoError;
}
diff --git a/Demos/Host/StillImageHost/StillImageCommands.c b/Demos/Host/StillImageHost/StillImageCommands.c
index 49ab0df01c652599ef02bad2f3187b1f47335eef..8f05e48f4aca3a78ba548531511a4dfc28012008 100644
--- a/Demos/Host/StillImageHost/StillImageCommands.c
+++ b/Demos/Host/StillImageHost/StillImageCommands.c
@@ -119,7 +119,7 @@ uint8_t SImage_RecieveBlockHeader(void)
if (!(TimeoutMSRem))
{
/* Return error code */
- return PIPE_RWSTREAM_ERROR_Timeout;
+ return PIPE_RWSTREAM_Timeout;
}
}
@@ -132,7 +132,7 @@ uint8_t SImage_RecieveBlockHeader(void)
SImage_ClearPipeStall(SIMAGE_DATA_OUT_PIPE);
/* Return error code and break out of the loop */
- return PIPE_RWSTREAM_ERROR_PipeStalled;
+ return PIPE_RWSTREAM_PipeStalled;
}
Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
@@ -144,14 +144,14 @@ uint8_t SImage_RecieveBlockHeader(void)
SImage_ClearPipeStall(SIMAGE_DATA_IN_PIPE);
/* Return error code */
- return PIPE_RWSTREAM_ERROR_PipeStalled;
+ return PIPE_RWSTREAM_PipeStalled;
}
/* Check to see if the device was disconnected, if so exit function */
if (!(USB_IsConnected))
{
/* Return error code */
- return PIPE_RWSTREAM_ERROR_DeviceDisconnected;
+ return PIPE_RWSTREAM_DeviceDisconnected;
}
};
@@ -185,7 +185,7 @@ uint8_t SImage_RecieveBlockHeader(void)
/* Freeze the IN pipe after use */
Pipe_Freeze();
- return PIPE_RWSTREAM_ERROR_NoError;
+ return PIPE_RWSTREAM_NoError;
}
/** Function to send the given data to the device, after a command block has been issued.
diff --git a/Demos/Host/StillImageHost/StillImageHost.c b/Demos/Host/StillImageHost/StillImageHost.c
index ca5292ba2101abd59accc6c2fd2c0cf3470ccf10..ceec151aae5d07eeb8a372feb6e5142ccfa0fac3 100644
--- a/Demos/Host/StillImageHost/StillImageHost.c
+++ b/Demos/Host/StillImageHost/StillImageHost.c
@@ -222,7 +222,7 @@ TASK(USB_SImage_Host)
SImage_SendBlockHeader();
/* Receive the response data block */
- if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_NoError)
{
ShowCommandError(ErrorCode, false);
break;
@@ -273,7 +273,7 @@ TASK(USB_SImage_Host)
printf_P(PSTR(" Device Version: %s\r\n"), DeviceVersion);
/* Receive the final response block from the device */
- if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_NoError)
{
ShowCommandError(ErrorCode, false);
break;
@@ -301,7 +301,7 @@ TASK(USB_SImage_Host)
SImage_SendBlockHeader();
/* Receive the response block from the device */
- if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_NoError)
{
ShowCommandError(ErrorCode, false);
break;
@@ -329,7 +329,7 @@ TASK(USB_SImage_Host)
SImage_SendBlockHeader();
/* Receive the response block from the device */
- if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
+ if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_NoError)
{
ShowCommandError(ErrorCode, false);
break;