diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index 7d4b2c1b5c294fd32e1d6c783cd87ac7ee5e037e..1eda701abbafc1d6b7a0ee1ebd024d2c4135f85f 100644
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -101,7 +101,7 @@
   *  - Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full
   *  - Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor
   *  - Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics)
-  *  - Fixed PDI/TPI programming speed of ~250KHz in the AVRISP-MKII Clone project, instead of the desired 500KHz
+  *  - Fixed PDI/TPI programming speed of ~250KHz in the AVRISP-MKII Clone project, instead of the desired 500KHz (thanks to Tom Light)
   *
   *  \section Sec_ChangeLog100807 Version 100807
   *  <b>New:</b>
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
index 9056942d2a12b4e28bf6a7714549728e0e3692cf..97e0fb305a5ac01489ac428f58e1708a8c124a98 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
@@ -66,7 +66,7 @@ void ISPProtocol_EnterISPMode(void)
 
 	/* Perform execution delay, initialize SPI bus */
 	ISPProtocol_DelayMS(Enter_ISP_Params.ExecutionDelayMS);
-	ISPTarget_Init();
+	ISPTarget_EnableTargetISP();
 
 	/* Continuously attempt to synchronize with the target until either the number of attempts specified
 	 * by the host has exceeded, or the the device sends back the expected response values */
@@ -118,7 +118,7 @@ void ISPProtocol_LeaveISPMode(void)
 	/* Perform pre-exit delay, release the target /RESET, disable the SPI bus and perform the post-exit delay */
 	ISPProtocol_DelayMS(Leave_ISP_Params.PreDelayMS);
 	ISPTarget_ChangeTargetResetLine(false);
-	ISPTarget_ShutDown();
+	ISPTarget_DisableTargetISP();
 	ISPProtocol_DelayMS(Leave_ISP_Params.PostDelayMS);
 
 	Endpoint_Write_Byte(CMD_LEAVE_PROGMODE_ISP);
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
index d315e9d1e0eeef06022acdbff41c697b38357214..66a1c25606d76c197a16fb54e992767d6be66c69 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
@@ -142,7 +142,7 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK)
 /** Initialises the appropriate SPI driver (hardware or software, depending on the selected ISP speed) ready for
  *  communication with the attached target.
  */
-void ISPTarget_Init(void)
+void ISPTarget_EnableTargetISP(void)
 {
 	uint8_t SCKDuration = V2Params_GetParameterValue(PARAM_SCK_DURATION);
 
@@ -167,7 +167,7 @@ void ISPTarget_Init(void)
 /** Shuts down the current selected SPI driver (hardware or software, depending on the selected ISP speed) so that no
  *  further communications can occur until the driver is re-initialized.
  */
-void ISPTarget_ShutDown(void)
+void ISPTarget_DisableTargetISP(void)
 {
 	if (HardwareSPIMode)
 	{
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
index aae4c5b53867d7c3a748e3437528d92aaa7cb287..ba47fdde9c4f68135b4329bd7241048759c8aef2 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
@@ -69,8 +69,8 @@
 		extern bool HardwareSPIMode;
 
 	/* Function Prototypes: */
-		void    ISPTarget_Init(void);
-		void    ISPTarget_ShutDown(void);
+		void    ISPTarget_EnableTargetISP(void);
+		void    ISPTarget_DisableTargetISP(void);
 		void    ISPTarget_ConfigureRescueClock(void);
 		void    ISPTarget_ConfigureSoftwareISP(const uint8_t SCKDuration);
 		uint8_t ISPTarget_TransferSoftSPIByte(const uint8_t Byte);
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
index 54184110553b22afe34d2e7d56ee9177ac5a7a61..e5952a1ac86a2a6c5ced0dd04d5cb1220d4a506a 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
@@ -113,7 +113,6 @@
 		extern uint16_t XPROG_Param_EEPageSize;
 		extern uint8_t  XPROG_Param_NVMCSRRegAddr;
 		extern uint8_t  XPROG_Param_NVMCMDRegAddr;
-		extern uint8_t  XPROG_SelectedProtocol;
 
 	/* Function Prototypes: */
 		void XPROGProtocol_SetMode(void);
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
index 5d59f7f176857a9a9a2b78cfccbfbed0c4912451..8760e62cbd894094c82dc5be745a34e700471f51 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
@@ -55,7 +55,7 @@ void XPROGTarget_EnableTargetPDI(void)
 	_delay_us(1);
 
 	/* Set up the synchronous USART for XMEGA communications - 8 data bits, even parity, 2 stop bits */
-	UBRR1  = (F_CPU / XPROG_HARDWARE_SPEED);
+	UBRR1  = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1);
 	UCSR1B = (1 << TXEN1);
 	UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);