From f2324fc2b4a926dc2db5d3e681a019949fe23342 Mon Sep 17 00:00:00 2001
From: Dean Camera <dean@fourwalledcubicle.com>
Date: Sun, 14 Nov 2010 06:44:57 +0000
Subject: [PATCH] Second patch to fix incorrect PDI/TPI programming speed.

---
 LUFA/ManPages/ChangeLog.txt                    | 2 +-
 Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c     | 4 ++--
 Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c       | 4 ++--
 Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h       | 4 ++--
 Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h | 1 -
 Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c   | 2 +-
 6 files changed, 8 insertions(+), 9 deletions(-)

diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index 7d4b2c1b5..1eda701ab 100644
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -101,7 +101,7 @@
   *  - Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full
   *  - Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor
   *  - Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics)
-  *  - Fixed PDI/TPI programming speed of ~250KHz in the AVRISP-MKII Clone project, instead of the desired 500KHz
+  *  - Fixed PDI/TPI programming speed of ~250KHz in the AVRISP-MKII Clone project, instead of the desired 500KHz (thanks to Tom Light)
   *
   *  \section Sec_ChangeLog100807 Version 100807
   *  <b>New:</b>
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
index 9056942d2..97e0fb305 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
@@ -66,7 +66,7 @@ void ISPProtocol_EnterISPMode(void)
 
 	/* Perform execution delay, initialize SPI bus */
 	ISPProtocol_DelayMS(Enter_ISP_Params.ExecutionDelayMS);
-	ISPTarget_Init();
+	ISPTarget_EnableTargetISP();
 
 	/* Continuously attempt to synchronize with the target until either the number of attempts specified
 	 * by the host has exceeded, or the the device sends back the expected response values */
@@ -118,7 +118,7 @@ void ISPProtocol_LeaveISPMode(void)
 	/* Perform pre-exit delay, release the target /RESET, disable the SPI bus and perform the post-exit delay */
 	ISPProtocol_DelayMS(Leave_ISP_Params.PreDelayMS);
 	ISPTarget_ChangeTargetResetLine(false);
-	ISPTarget_ShutDown();
+	ISPTarget_DisableTargetISP();
 	ISPProtocol_DelayMS(Leave_ISP_Params.PostDelayMS);
 
 	Endpoint_Write_Byte(CMD_LEAVE_PROGMODE_ISP);
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
index d315e9d1e..66a1c2560 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
@@ -142,7 +142,7 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK)
 /** Initialises the appropriate SPI driver (hardware or software, depending on the selected ISP speed) ready for
  *  communication with the attached target.
  */
-void ISPTarget_Init(void)
+void ISPTarget_EnableTargetISP(void)
 {
 	uint8_t SCKDuration = V2Params_GetParameterValue(PARAM_SCK_DURATION);
 
@@ -167,7 +167,7 @@ void ISPTarget_Init(void)
 /** Shuts down the current selected SPI driver (hardware or software, depending on the selected ISP speed) so that no
  *  further communications can occur until the driver is re-initialized.
  */
-void ISPTarget_ShutDown(void)
+void ISPTarget_DisableTargetISP(void)
 {
 	if (HardwareSPIMode)
 	{
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
index aae4c5b53..ba47fdde9 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
@@ -69,8 +69,8 @@
 		extern bool HardwareSPIMode;
 
 	/* Function Prototypes: */
-		void    ISPTarget_Init(void);
-		void    ISPTarget_ShutDown(void);
+		void    ISPTarget_EnableTargetISP(void);
+		void    ISPTarget_DisableTargetISP(void);
 		void    ISPTarget_ConfigureRescueClock(void);
 		void    ISPTarget_ConfigureSoftwareISP(const uint8_t SCKDuration);
 		uint8_t ISPTarget_TransferSoftSPIByte(const uint8_t Byte);
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
index 541841105..e5952a1ac 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
@@ -113,7 +113,6 @@
 		extern uint16_t XPROG_Param_EEPageSize;
 		extern uint8_t  XPROG_Param_NVMCSRRegAddr;
 		extern uint8_t  XPROG_Param_NVMCMDRegAddr;
-		extern uint8_t  XPROG_SelectedProtocol;
 
 	/* Function Prototypes: */
 		void XPROGProtocol_SetMode(void);
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
index 5d59f7f17..8760e62cb 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
@@ -55,7 +55,7 @@ void XPROGTarget_EnableTargetPDI(void)
 	_delay_us(1);
 
 	/* Set up the synchronous USART for XMEGA communications - 8 data bits, even parity, 2 stop bits */
-	UBRR1  = (F_CPU / XPROG_HARDWARE_SPEED);
+	UBRR1  = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1);
 	UCSR1B = (1 << TXEN1);
 	UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
 
-- 
GitLab