diff --git a/LUFA/Drivers/USB/Class/Device/HID.h b/LUFA/Drivers/USB/Class/Device/HID.h
index e3f091bfb45773f0b1c1c4e1a56fce18226ec67b..ccd7426e198fd4c75f5ebc787e4af0d0a7e3c462 100644
--- a/LUFA/Drivers/USB/Class/Device/HID.h
+++ b/LUFA/Drivers/USB/Class/Device/HID.h
@@ -60,6 +60,10 @@
 			/** Class state structure. An instance of this structure should be made for each HID interface
 			 *  within the user application, and passed to each of the HID class driver functions as the
 			 *  HIDInterfaceInfo parameter. This stores each HID interface's configuration and state information.
+			 *
+			 *  \note Due to technical limitations, the HID device class driver does not utilize a seperate OUT
+			 *        endpoint for host->device communications. Instead, the host->device data (if any) is sent to
+			 *        the device via the control endpoint.
 			 */
 			typedef struct
 			{
diff --git a/Projects/AVRISP/AVRISP.txt b/Projects/AVRISP/AVRISP.txt
index 8d299e25a02c0207a29b966ea1d1476f51d2a810..a9d5507861f46a58b4d0661672692743c9836352 100644
--- a/Projects/AVRISP/AVRISP.txt
+++ b/Projects/AVRISP/AVRISP.txt
@@ -66,6 +66,42 @@
  *  set to an appropriate ADC channel number in the project makefile for VTARGET detection to operate correctly. On models
  *  without an ADC converter, VTARGET will report at a fixed 5V level.
  *
+ *  Connections to the device are simple:
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>Programmer Pin:</b></td>
+ *    <td><b>Target Device Pin:</b></td>
+ *   </tr>
+ *   <tr>
+ *    <td>MOSI</td>
+ *    <td>PDI</td>
+ *   </tr>
+ *   <tr>
+ *    <td>MISO</td>
+ *    <td>PDO</td>
+ *   </tr>
+ *   <tr>
+ *    <td>SCLK</td>
+ *    <td>SCLK</td>
+ *   </tr>
+ *   <tr>
+ *    <td>GND</td>
+ *    <td>GND</td>
+ *   </tr>
+ *   <tr>
+ *    <td>ADCx <b><sup>1</sup></b></td>
+ *    <td>VTARGET</td>
+ *   </tr>
+ *   <tr>
+ *    <td>PORTx.y <b><sup>2</sup></b></td>
+ *    <td>/RESET</td>
+ *   </tr>
+ *  </table>
+ *
+ *  <b><sup>1</sup></b> <i>Optional, see \ref SSec_Options section - for USB AVRs with ADC modules only</i> \n
+ *  <b><sup>2</sup></b> <i>See \ref SSec_Options section</i>
+ *
  *  \section SSec_Options Project Options
  *
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
@@ -89,7 +125,7 @@
  *   <tr>
  *    <td>RESET_LINE_MASK</td>
  *    <td>Makefile CDEFS</td>
- *    <td>Mask for the programmer's target RESET line on the chosen port.</td>
+ *    <td>Mask for the programmer's target RESET line on the chosen port. <b>Must not be the AVR's /SS pin.</b></td>
  *   </tr>
  *   <tr>
  *    <td>VTARGET_ADC_CHANNEL</td>