GitLab

Change HID report parser so that it can calculate and record the sizes (IN, OUT and FEATURE) of each report within the device, by report ID. This will be required in host mode, so that the host can determine how many bytes of data must be read in for each report.

Add to MouseHostWithParser and KeyboardHostWithParser demos to print out the report sizes when a valid device is connected.

Add link to third-party signed version of the official FLIP DFU driver for 64-bit Windows OSes to the DFU bootloader readme file.

Add HTML anchor links to URLs in the documentation to ensure that they are rendered correctly in the generated documentation.

Corrected incorrect signature bytes for the AT90USB82 and added support for the ATMEGAXX2 variant AVRs to the DFU bootloader.

Added warning to the EVENT_USB_Device_Connect() and EVENT_USB_Device_Disconnect() events that they may be fired multiple times during device enumeration on the series 2 AVRs.

Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names are used in a project.

Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)

Fix allowable F_CPU values comment in project makefiles.

Changed Still Image Host class driver to auto-fill TransactionID element of sent headers depending on the current session state.

CDC based demos and project now work under 64 bit versions of Windows (thanks to Ronny Hanson, Thomas Bleeker).

The Benito Programmer project now has its own unique VID/PID pair allocated from the Atmel donated LUFA VID/PID pool.

Add StillImage Host Class Driver functions for opening and closing sessions. Ensure IsActive is set on the interface to allow device functions to run.

Fix spelling of "Received" in all source files where it is misspelt "Recieved".

Add user-filtering to the HID report parser, so that the user code can decide which items are to be stored into the HID_ReportInfo_t structure and which should be discarded to save on RAM usage.

Changed HIDParser to only zero out important values in the Parsed HID Report Item Information structure to save cycles.

Fixed StillImageHost not correctly freezing and unfreezing data pipes while waiting for a response block header.

Added basic PIMA commands to the StillImage Host Class driver - need to extend to PIMA specific command functions.

Move check for devices not supporting internal serials in demos which make use of USE_INTERNAL_SERIAL to Descriptors.c from Descriptors.h so that the warning is only generated at most once per compilation.

Changed the parameters and behaviour of the USB_GetDeviceConfigDescriptor() function so that it now performs size checks and data validations internally, to simplify user code.

Renamed parameters of SI_Host_ConfigurePipes() to match other Host mode Class drivers.

Fixed Device mode HID Class driver not explicitly initializing the ReportSize parameter to zero before calling callback routine, so that ignored callbacks don't cause incorrect data to be sent.

Fixed issue in AVRISP project where the target RESET line was being toggled before it was tristated, causing problems synchronising to some targets (thanks to Mike Alex).

Added new "Common" section to the class drivers, to hold all mode-independant definitions for clarity.

Moved SCSI command/sense constants into the Mass Storage Class driver, instead of the user-code.

Oops: Really disable building of Projects/Host/ClassDriver directory in the Projects/Host/ makefile.

Add more skeleton functions and definitions to the Mass Storage Host mode Class driver.

Made Endpoint_Write_DWord_* functions echo the structure of the matching Endpoint routines for clarity.

Fixed Programmer's Notepad project file to reflect new location of AVRISP project.

Fixed AVRISP V2 Protocol handler for the READ_FLASH_ISP and READ_EEPROM_ISP handler - can now correctly read back device data. Programming command handler is still broken, although first page is written correctly to FLASH in paged write mode.

Fixed AVRISP programmer demo -- can now connect to a target and read/write Sig/Lock/Fuse/OSCCAL bytes successfully.

Changed SPI_Init() to allow for the clock polarity and data sample modes to be set.

Changed Dataflash_Init() to no longer call SPI_Init() automatically.

Added V2Protocol handlers to the AVRISP project to enter/exit programming mode, and read/write fuses, lockbits, OSCCAL and Signature bytes.

Added ShutDown functions for all hardware peripheral drivers, so that peripherals can be turned off after use.

Added new Endpoint_SetEndpointDirection() macro to set the current endpoint direction for bidirectional endpoints.

Renamed internal USB_INT_ENDPOINT_SETUP macro to USB_INT_RXSTPI to fit in with the rest of the interrupt vector macros.

Added new EVENT_USB_Device_StartOfFrame() event, controlled by the new USB_Device_EnableSOFEvents() and USB_Device_DisableSOFEvents() macros to give bus-synchronised millisecond interrupts when in USB device mode.

Minor updates to the unfinished SideShow demo for clarity.

Added unfinished MassStorageHost class driver demo.

SetIdle requests to the HID device driver with a 0 idle period (send changes only) now only affect the requested HID interface within the device, not all HID interfaces.

Apply correct fix to the HID report parser for PUSH items - current HID item attribute stack was being copied in the wrong direction.

Fixed HID report parser not resetting the FEATURE item count when a REPORT ID item is encountered.

Minor documentation fixes.

Fixed swapped paremeters in the HID state memory copy call while processing a HID PUSH item in the HID report parser.

Fixed memory corruption HID report parser when too many COLLECTION or PUSH items were processed.

Make RNDIS device class driver include the CDC device class driver header, so that it can inherrit the required CDC functional descriptor macro.

Make HID host class driver include the HID report parser.

Fix issue in CDC device class driver where received data the size of the data endpoint could lock up the driver.

Further work on the new CDC and HID host mode class drivers.

Reset changelog et. al. to reset development information for the new version currently under development.

Fixed issue in USBtoSerial demos where the USART Rx line was not having its pullup enabled at startup, leading to noise being received from the Rx pin when left floating.

Removed unused relative Common.h header include from the DriverStubs board stub drivers.

Fixed Benito programmer, use the correct LED functions where needed to ensure correct status display at all times.

Make Control Endpoint stream transfers more reliable by adding in early aborts for unexpected new SETUP tokens, or unexpected status stage during control stream writes.

Fix corruption in Device RNDIS demos TCP stack when too many connections attempted simultaneously, freezing the device when a page was re-fetched before the first connection was closed.

Fix incorrect model compatibility information in the Host LowLevel demo overview text files.

Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.

Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.

Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.