GitLab

Fixed compilation error in the AudioInput demos when MICROPHONE_BIASED_TO_HALF_RAIL is defined (thanks to C. Scott Ananian).

Minor documentation cleanups.

Make sure HID class driver uses properly cast pointers when writing to the report buffer.

Standardized the naming scheme given to configuration descriptor sub-elements in the Device mode demos, bootloaders and projects.

Fix errors in the MouseHostWithParser demo from incorrect use of the HID_ALIGN_DATA() macro.

Double bank CDC endpoints in the XPLAIN Bridge project, re-enable JTAG once the mode selection pin has been sampled.

Increased throughput of the USBtoSerial demo on systems that send multiple bytes per packet (thanks to Opendous Inc.).

Don't enable the pullup on the target /RESET line in the AVRISP project for PDI mode - clearing the XMEGA's reset control register twice is enough to release it from reset. Possible silicon bug, since the official Atmel programmers have the same issue.

Fixed PDI programming mode in the AVRISP programmer project not exiting programming mode correctly (clear target Reset key twice, set /RESET pin to pullup).

Add newlines to the MIDI event printf() statements in the MIDI host demos.

Fixed ADC routines failing to read the extended channels (Channels 8 to 13, Internal Temperature Sensor) on the U4 series USB AVR parts.

Added ENABLE_TELNET_SERVER compile time option to the Webserver project to disable the TELNET server if desired.

Change over static strings in the Webserver project to use PROGMEM where possible.

Don't double-read data from the attached disk in the incomplete StandaloneProgrammer project when in host mode.

Fix TWI driver not aborting when faced with no response after attempting to address a device on the bus.

Added a timeout value to the TWI_StartTransmission() function, within which the addressed device must respond.

Fixed TWI_StartTransmission() corrupting the contents of the GPIOR0 register.

Fixed software PDI/TPI programming mode in the AVRISP project not correctly toggling just the clock pin.

Fix broken AVR8 Serial peripheral driver.

AVRISP programmer project now has a more robust timeout system, allowing for a doubling of the software USART speed for PDI and TPI programming.

Fixed accuracy of the SERIAL_UBBRVAL() and SERIAL_2X_UBBRVAL() macros for higher baudrates (thanks to Renaud Cerrato).

Added .5MHz recovery clock to the AVRISP programmer project when in ISP programming mode to correct mis-set fuses.

Fixed AVRISP project not extending the command delay after each successful page/word/byte program.

Moved the USB_GetHIDReportItemInfo() calls into the main report item passing loop in the *HostWithParser demos - it is fast enough not to effect performance, and avoids duplicate code.

Make Webserver project report the LUFA version as part of the HTTP header.

Fixed SerialStream driver blocking while waiting for characters to be received instead of returning EOF.

New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which do not adversely affect the code operation (currently only the LEDs driver).

Spell-check code/comments in the Webserver/AVRISP-MKII projects.

Fixed incorrect values of USB_CONFIG_ATTR_SELFPOWERED and USB_CONFIG_ATTR_REMOTEWAKEUP tokens (thanks to Claus Christensen).

Mark the AVRISP-MKII project descriptors as being both Bus Powered and Device Powered.

Copy over file level documentation of the peripheral drivers to the module level documentation.

Fixed STK525 Dataflash driver using incorrect bit-shifting for Dataflash addresses (thanks to Tim Mitchell).

Re-added Pipe_IsEndpointBound() calls to the CDC and RNDIS host class drivers, not that the function has the correct behaviour for devices with bidirectional endpoints.

Update driver INF files - change manufacturer name from the original template's name to the Four Walled Cubicle website.

Add MIME type handling to the Webserver project, so that files of different types (e.g. images) can be served out to HTTP clients.

Removed the stream example code from the Low Level VirtualSerial demos, as they were buggy and only served to add clutter.

Fix Doxygen configuration files' input file exclusion filters.

Fixed CDC and RNDIS host demos and class drivers - bidirectional endpoints should use two seperate pipes, not one half-duplex pipe.

Added explicit ADC channel masks for the standard set of ADC channels, as the single-ended channel MUX masks are not equal to the channel number on some AVR models. Changed demos to use the new channel masks when using the ADC driver.