1. 29 Jul, 2010 1 commit
  2. 15 Jul, 2010 1 commit
  3. 12 Jul, 2010 2 commits
    • Dean Camera's avatar
      Reduce prescaler of the flush timer in the USBtoSerial demo, so that buffer... · 8de31cbb
      Dean Camera authored
      Reduce prescaler of the flush timer in the USBtoSerial demo, so that buffer overruns will not occur regardless of hardware and baud rate settings.
      8de31cbb
    • Dean Camera's avatar
      Alter the ring buffer library headers to have both atomic and non-atomic... · 0bcc82ac
      Dean Camera authored
      Alter the ring buffer library headers to have both atomic and non-atomic insertion/removal routines. Modify the existing projects so that buffer operations performed in an ISR use the shorted non-atomic versions, as they are already performed in a blocking ISR.
      
      Alter USBtoSerial demo so that it does not enter a blocking loop to send data from the USB to the USART, as this can cause dropped bytes in the reception code if large amounts of data are sent in both directions at the same time. Added a flush timer to the USBtoSerial code for the USART to USB interface, so that multiple bytes can be sent in the same USB packet.
      0bcc82ac
  4. 26 May, 2010 1 commit
  5. 08 May, 2010 1 commit
  6. 02 May, 2010 1 commit
    • Dean Camera's avatar
      Change AVRISP project's timeout to be interrupt based again, but make the... · 3d28d53c
      Dean Camera authored
      Change AVRISP project's timeout to be interrupt based again, but make the interrupt itself interruptable and use a seperate assembly file to hand-optimize the ISR code.
      
      Removed the cast to uint16_t on the set baud rate in the USBtoSerial project, so that the higher >1M baud rates can be selected (thanks to Steffan).
      3d28d53c
  7. 28 Apr, 2010 1 commit
  8. 16 Mar, 2010 1 commit
  9. 30 Dec, 2009 1 commit
  10. 28 Dec, 2009 1 commit
  11. 06 Nov, 2009 1 commit
  12. 26 Oct, 2009 1 commit
  13. 18 Oct, 2009 1 commit
  14. 16 Aug, 2009 2 commits
  15. 05 Aug, 2009 2 commits
    • Dean Camera's avatar
      Fixed issue in USBtoSerial demos where the USART Rx line was not having its... · 99c447c7
      Dean Camera authored
      Fixed issue in USBtoSerial demos where the USART Rx line was not having its pullup enabled at startup, leading to noise being received from the Rx pin when left floating.
      
      Removed unused relative Common.h header include from the DriverStubs board stub drivers.
      
      Fixed Benito programmer, use the correct LED functions where needed to ensure correct status display at all times.
      99c447c7
    • Dean Camera's avatar
      Renamed all library events to properly seperate out Device and Host mode... · c5038f1b
      Dean Camera authored
      Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.
      
      Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.
      
      Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
      c5038f1b
  16. 27 Jul, 2009 1 commit
  17. 23 Jul, 2009 1 commit
  18. 21 Jul, 2009 1 commit
    • Dean Camera's avatar
      Added new USB_DeviceState variable to keep track of the current Device mode USB state. · e071f389
      Dean Camera authored
      Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
      
      Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
      
      Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
      
      Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
      e071f389
  19. 28 Jun, 2009 1 commit
    • Dean Camera's avatar
      Added const modifiers to device mode class drivers. · f1076ac4
      Dean Camera authored
      Added parameter directions to function parameter documentation.
      
      Added new experimental FAST_STREAM_FUNCTIONS compile time option to speed up stream transfers at the expense of a higher FLASH consumption (needs testing to verify improved throughput).
      f1076ac4
  20. 18 Jun, 2009 1 commit
  21. 11 Jun, 2009 1 commit
  22. 05 Jun, 2009 1 commit
  23. 04 Jun, 2009 1 commit
    • Dean Camera's avatar
      Minor documentation page updates. · a67bd74e
      Dean Camera authored
      Redocumented all device demos, now that they have changed over to the new USB class drivers.
      
      Added C linkage to class drivers for C++ support.
      
      Added prefixes to most of the class driver constants to prevent name clashes.
      a67bd74e
  24. 01 Jun, 2009 1 commit
    • Dean Camera's avatar
      Commit of new class abstraction APIs for all device demos other than the MIDI... · d1e52660
      Dean Camera authored
      Commit of new class abstraction APIs for all device demos other than the MIDI demo - not documented yet.
      
      Removed scheduler and memory allocation libraries.
      
      Added new EVENT_USB_StartOfFrame event in the library to indicate the start of each USB frame (when generated).
      
      Removed Tx interrupt from the USBtoSerial demo; now sends characters via polling to ensure more time for the Rx interrupt.
      d1e52660
  25. 26 May, 2009 1 commit
  26. 18 May, 2009 1 commit
    • Dean Camera's avatar
      Rewritten event system to remove all macros, to make user code clearer. · 2ee9fc70
      Dean Camera authored
      Fixed incorrect ENDPOINT_EPNUM_MASK mask preventing endpoints above EP3 from being selected (thanks to Jonathan Oakley).
      
      Removed STREAM_CALLBACK() macro - callbacks now use regular function definitions to clarify user code.
      
      Removed DESCRIPTOR_COMPARATOR() macro - comparators should now use regular function definitions to clarify user code.
      2ee9fc70
  27. 23 Apr, 2009 1 commit
  28. 22 Apr, 2009 1 commit
    • Dean Camera's avatar
      USB_HostRequest renamed to USB_ControlRequest, entire control request header... · d860e9e8
      Dean Camera authored
      USB_HostRequest renamed to USB_ControlRequest, entire control request header is now read into USB_ControlRequest in Device mode rather than having the library pass only partially read header data to the application.
      
      The USB_UnhandledControlPacket event has had its parameters removed, in favour of accessing the new USB_ControlRequest structure.
      
      The Endpoint control stream functions now correctly send a ZLP to the host when less data than requested is sent.
      d860e9e8
  29. 21 Apr, 2009 1 commit
  30. 20 Apr, 2009 1 commit
  31. 17 Apr, 2009 1 commit
  32. 16 Apr, 2009 1 commit
    • Dean Camera's avatar
      Fixed GenericHIDHost demo report write routine incorrect for control type... · 8f6b4ddf
      Dean Camera authored
      Fixed GenericHIDHost demo report write routine incorrect for control type requests (thanks to Andrei Krainev).
      
      Removed Endpoint_ClearCurrentBank() and Pipe_ClearCurrentBank() in favour of new Endpoint_ClearIN(), Endpoint_ClearOUT(), Endpoint_ClearControlIN(), Endpoint_ClearControlOUT(), Pipe_ClearIN(), Pipe_ClearOUT(), Pipe_ClearControlIN() and Pipe_ClearControlOUT() macros (done to allow for the detection of packets of zero length).
      
      Renamed *_ReadWriteAllowed() macros to *_IsReadWriteAllowed() to remain consistent with the rest of the LUFA API.
      
      Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived(), Endpoint_ClearSetupReceived() macro has been renamed to Endpoint_ClearControlSETUP(), the Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent() and the Pipe_ClearSetupSent() macro is no longer applicable and should be removed - changes made to compliment the new endpoint and pipe bank management API.
      
      Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel).
      
      Updated library doxygen documentation, added groups, changed documentation macro functions to real functions for clarity.
      
      Removed old endpoint and pipe aliased read/write/discard routines which did not have an explicit endian specifier for clarity.
      
      Removed the ButtLoadTag.h header file, as no one used for its intended purpose anyway.
      8f6b4ddf
  33. 01 Apr, 2009 1 commit
  34. 20 Mar, 2009 1 commit
  35. 10 Mar, 2009 1 commit
  36. 23 Feb, 2009 2 commits