Commit 64c4961f authored by Sara Falcone's avatar Sara Falcone


parent 04161a43
......@@ -44,6 +44,8 @@ A motivation in the design for this machine was a desire to practice routing on
And this is an angled view of that piece which was routed with a 6mm end mill, then finished with a 2mm to get smaller internal radiuses. It was tapped afterwards.
<img src="/images/IMG-3156.JPG" width=50%/>
![Zund compare](/images/IMG-3156.JPG)
The optical registration didn't proove accurate enough to re-allign parts after they'd been moved. I tried a few times and the second pass was visibly off. For rapidity of fabrication I ended up waterjetting about half of the peices, but the machine came together within the week.
Markdown is supported
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment