diff --git a/circuit/README.md b/circuit/README.md index 79f5956ea8d0fbc2e22333e14ea06f1018b7106e..debbfebeb8d7d3759e46d589c11740b8652a750b 100644 --- a/circuit/README.md +++ b/circuit/README.md @@ -20,7 +20,7 @@ I also added microcontroller input to a few lines: the gain selection on the drv ## New Routing -But *holy shit* did I ever open up the ratsnest :| +But *holy dang* did I ever open up the ratsnest :| ![the-ratsnest](https://gitlab.cba.mit.edu/jakeread/mkbldcdriver/raw/master/images/routing-ratsnest.png) @@ -56,7 +56,47 @@ And the full schematic ![fabbed](https://gitlab.cba.mit.edu/jakeread/mkbldcdriver/raw/master/images/fab-v031-02.jpg) -wow +## Another Run + +## MK Global Wants and board notes + +### BLDC: + +need to add: + +hella vias + - gnd around drv + - ultra mega vcc heatsink under fets + - around phases + - route sense lines (yikes) + - route logic ... + - pull that 3v3 out to thermistor + - verify you can SSI with those pins + - silk: + - debug names + - phase names + - heatsink lands + - + +split gnd plane power -> logic + - bk does this thru a 0 ohm resistor + +footprint update + - and thermistor on that: loop does safe shutdown on big heat for safe search + + - Capacitor Offboard Board Board for ultra-mega + - Capacitor lay-down beside for on-board for 1000uF or so + +order: + - 2512 Shunts + - fancy h-bridges? + - thermistor + - AE10817-ND + - 493-1111-ND + - 296-48289-1-ND + - https://www.digikey.com/products/en/resistors/chip-resistor-surface-mount/52?k=&pkeyword=shunt+resistor&pv2=143&pv2=7&pv2=8&FV=mu1+mOhms%7C2085%2Cmu1.5+mOhms%7C2085%2Cmu2+mOhms%7C2085%2Cffe00034&quantity=0&ColumnSort=0&page=1&pageSize=25 + - https://www.digikey.com/catalog/en/partgroup/ncp21/10801?mpart=NCP21XV103J03RA&vendor=490 + - thermal tape for those hs's # Footnotes 1. Part Number. Searching Digikey (or octopart, or what have you) for bits is an art, kind of. It's intimidating, but offers much gold at the end of the rainbow. diff --git a/circuit/mkbldcdriver/eagle.epf b/circuit/mkbldcdriver/eagle.epf index 560b7bc2c2251f519ab7c4c317f685aef1036ff1..7638b5bca9972e184e94ab97f98cde03bed778d3 100644 --- a/circuit/mkbldcdriver/eagle.epf +++ b/circuit/mkbldcdriver/eagle.epf @@ -1,5 +1,5 @@ [Eagle] -Version="08 03 02" +Version="08 07 01" Platform="Windows" Globals="Globals" Desktop="Desktop" @@ -8,7 +8,10 @@ Desktop="Desktop" AutoSaveProject=1 UsedLibraryUrn="urn:adsk.eagle:library:217" UsedLibraryUrn="urn:adsk.eagle:library:325" +UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/connector.lbr" UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/fab.lbr" +UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/lights.lbr" +UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/microcontrollers.lbr" UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/motors.lbr" UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/power.lbr" UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/sensor.lbr" @@ -35,12 +38,55 @@ UsedLibrary="C:/EAGLE 8.3.2/lbr/ltspice/sym.lbr" UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries_jake/eagle/sparkfun/SparkFun-DiscreteSemi.lbr" [Win_1] +Type="Library Editor" +Number=3 +File="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/power.lbr" +View="-2.74419 -2.2552 0.936019 2.20296" +WireWidths=" 0.0762 0.1016 0.15 0.2 0.2032 0.3048 0.4064 0.508 0.6096 0.8128 1.016 1.27 2.54 0.1524 0.254 0.127" +PadDiameters=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0" +PadDrills=" 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.65 0.7 0.75 0.8 0.85 0.9 1 0.6" +ViaDiameters=" 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 1.15 1.2 1.3 0" +ViaDrills=" 0.2 0.25 0.3 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.35" +HoleDrills=" 0.2 0.25 0.3 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.35" +TextSizes=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.4224 1.6764 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.778 1.27" +PolygonSpacings=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.27" +PolygonIsolates=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0" +MiterRadiuss=" 0.254 0.3175 0.635 1.27 2.54 1 2 2.5 5 7.5 10 0" +DimensionWidths=" 0 0.127 0.254 0.1 0.26 0.13" +DimensionExtWidths=" 0.127 0.254 0.1 0.13 0.26 0" +DimensionExtLengths=" 1.27 2.54 1 2 3 0" +DimensionExtOffsets=" 1.27 2.54 1 2 3 0" +SmdSizes=" 0.3048 0.1524 0.4064 0.2032 0.6096 0.3048 0.8128 0.4064 1.016 0.508 1.27 0.6604 1.4224 0.7112 1.6764 0.8128 1.778 0.9144 1.9304 0.9652 2.1844 1.0668 2.54 1.27 3.81 1.9304 5.08 2.54 6.4516 3.2512 1.27 0.635" +WireBend=4 +WireBendSet=0 +WireCap=1 +MiterStyle=0 +PadShape=0 +ViaShape=1 +PolygonPour=0 +PolygonRank=0 +PolygonThermals=1 +PolygonOrphans=0 +TextRatio=8 +DimensionUnit=1 +DimensionPrecision=2 +DimensionShowUnit=0 +PinDirection=3 +PinFunction=0 +PinLength=2 +PinVisible=3 +SwapLevel=0 +ArcDirection=0 +AddLevel=2 +PadsSameType=0 +Layer=1 +Package="R2512" + +[Win_2] Type="Schematic Editor" -Loc="0 0 1919 1016" -State=1 Number=2 File="mkbldcdriver.sch" -View="-216.353 -128.597 511.138 146.524" +View="249.187 96.724 390.18 150.044" WireWidths=" 0.0762 0.1016 0.127 0.15 0.2 0.2032 0.254 0.3048 0.4064 0.508 0.6096 0.8128 1.016 1.27 2.54 0.1524" PadDiameters=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0" PadDrills=" 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.65 0.7 0.75 0.8 0.85 0.9 1 0.6" @@ -79,21 +125,19 @@ ArcDirection=0 AddLevel=2 PadsSameType=0 Layer=91 -Views=" 1: -216.353 -128.597 511.138 146.524" +Views=" 1: 249.187 96.724 390.18 150.044" Sheet="1" -[Win_2] +[Win_3] Type="Board Editor" -Loc="0 0 1919 1016" -State=1 Number=1 File="mkbldcdriver.brd" -View="-12.6588 37.2079 124.714 41.4748" -WireWidths=" 0.0762 0.1016 0.127 0.15 0.508 0.6096 0.8128 2.54 1.016 1.27 0.3048 0.254 0.2 0.4064 0.2032 0.1524" +View="2.12736 10.6622 136.133 64.5084" +WireWidths=" 0.0762 0.1016 0.127 0.15 0.508 0.6096 0.8128 2.54 1.016 1.27 0.3048 0.254 0.2 0.4064 0.1524 0.2032" PadDiameters=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0" PadDrills=" 0.2 0.25 0.35 0.4 0.45 0.5 0.55 0.65 0.7 0.75 0.8 0.85 0.9 1 0.6 0.3" ViaDiameters=" 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 1.15 1.2 1.3 0" -ViaDrills=" 0.2 0.4 0.45 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.5 0.25 0.35 0.3" +ViaDrills=" 0.2 0.4 0.45 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.5 0.25 0.3 0.35" HoleDrills=" 0.2 0.25 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.35 0.3" TextSizes=" 0.254 0.3048 0.4064 0.8128 1.016 1.27 1.4224 1.6764 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.778 0.6096" PolygonSpacings=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.27" @@ -104,14 +148,14 @@ DimensionExtWidths=" 0.127 0.254 0.1 0.13 0.26 0" DimensionExtLengths=" 1.27 2.54 1 2 3 0" DimensionExtOffsets=" 1.27 2.54 1 2 3 0" SmdSizes=" 0.3048 0.1524 0.4064 0.2032 0.6096 0.3048 0.8128 0.4064 1.016 0.508 1.27 0.6604 1.4224 0.7112 1.6764 0.8128 1.778 0.9144 1.9304 0.9652 2.1844 1.0668 2.54 1.27 3.81 1.9304 5.08 2.54 6.4516 3.2512 1.27 0.635" -WireBend=1 +WireBend=3 WireBendSet=0 WireCap=1 MiterStyle=0 PadShape=0 ViaShape=1 PolygonPour=0 -PolygonRank=1 +PolygonRank=3 PolygonThermals=1 PolygonOrphans=0 TextRatio=8 @@ -128,10 +172,8 @@ AddLevel=2 PadsSameType=0 Layer=1 -[Win_3] +[Win_4] Type="Control Panel" -Loc="0 0 1919 1016" -State=1 Number=0 [Desktop] @@ -139,3 +181,4 @@ Screen="6000 2160" Window="Win_1" Window="Win_2" Window="Win_3" +Window="Win_4" diff --git a/circuit/mkbldcdriver/mkbldcdriver.brd b/circuit/mkbldcdriver/mkbldcdriver.brd index eb379ad9d7c4f9ca17bcf0f968b40be7c5ae186e..80cb57de4e95f6ba48b996354a95ef8899079578 100644 --- a/circuit/mkbldcdriver/mkbldcdriver.brd +++ b/circuit/mkbldcdriver/mkbldcdriver.brd @@ -1,14 +1,28 @@ - + - + - + + + + + + + + + + + + + + + @@ -44,7 +58,7 @@ - + @@ -142,169 +156,58 @@ - - - - - - - - - -"wow" - - Owen Wilson -W -V -U - - - - - - - -SPI -NP1 -NP2 -V-VCC -V-W -V-V -V-U -I-V -I-W -3V3 -GND -LO3 -HI3 -LO2 -HI2 -LO1 -HI1 -FAULT -GND -mkbldcdriver v0.31 -< no - go > -usb -drv -GND -VCC -GND -VCC - - - - - -VCC +W +V +U +SPI +UP0 +UP1 +V-VCC +V-W +V-V +V-U +I-V +I-W +3V3 +GND +HI3 +HI2 +HI1 +FAULT +mkbldcdriver v0.4 +< no - go > +GND +VCC + + + + + + + + + + + + + + + + + + + + + + + + + + - -Default symbols for import LTspice schematics<p> -2012-10-29 alf@cadsoft.de<br> - - -<b>RESISTOR</b><p> - - - - - - - - - - - ->NAME ->VALUE - - -<b>INDUCTOR</b><p> -chip - - - - - - ->NAME ->VALUE - - - - -RESISTOR - - -INDUCTOR -chip - - - - -<b>Power Transistors</b><p> -<author>Created by librarian@cadsoft.de</author> - - -<b>DirectFET (TM) Outline Dimension, MN Outline</b><p> -(Medium Size Can, N-Designation).<br> -Source: http://www.irf.com/product-info/datasheets/data/irf6648.pdf - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - -<b>SMD SHUNT RESISTOR</b> - - - - - - - - ->NAME ->VALUE - - - - - - - - ->NAME ->VALUE - @@ -392,79 +295,6 @@ Source: http://www.irf.com/product-info/datasheets/data/irf6648.pdf - -<b>Power TOPLED®</b><p> -Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE -R -G -B -A - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->Name ->Value - - - - - - - @@ -561,64 +391,6 @@ Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf - -<b>TAG-CONNECT ICSP Connector</b> - Legged version<BR><I>Manufacturer:</I> <a href="http://www.tag-connect.com">Tag-Connect</a> -<p> -Cable for easy In-Circuit Serial Programming. Designed for Microchip ICD2, suitable for many others. -<p> -<b>NOTE:</b> Eagle's default spacing for drill holes does not leave sufficent room for routing traces for this footprint and should be adjusted. <br> -This setting can be found in the board layout editor under the Edit menu. Select "Design Rules" and then the Distance tab. 8 mils for Drill/Hole works well. -<br> -<TABLE cellspacing=0 cellpadding=0 border=0> -<TR><TD width=20></TD><TD> -<TABLE cellspacing=0 cellpadding=1 border=1> -<TR bgcolor=silver><TD align=center>PAD</TD><TD align=center>Description</TD></TR> -<TR><TD align=center>1</TD><TD>MCLR/Vpp</TD></TR> -<TR><TD align=center>2</TD><TD>Vdd</TD></TR> -<TR><TD align=center>3</TD><TD>GND</TD></TR> -<TR><TD align=center>4</TD><TD>PGD (ISPDAT)</TD></TR> -<TR><TD align=center>5</TD><TD>PGC (ISPCLK)</TD></TR> -<TR><TD align=center>6</TD><TD>nc (used for LVP)</TD></TR> -</TABLE> -</TD></TR></TABLE><BR><BR> -©2009 ROFA.cz - modified and updated by Robert Darlington &#8249;rdarlington@gmail.com&#8250; - - - - - - ->name - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -638,21 +410,9 @@ This setting can be found in the board layout editor under the Edit menu. Selec - - - - - - - - - ->NAME ->VALUE - - - + + >NAME >VALUE @@ -675,6 +435,58 @@ This setting can be found in the board layout editor under the Edit menu. Selec + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -744,24 +556,48 @@ This setting can be found in the board layout editor under the Edit menu. Selec >VALUE - -<b>Small Outline Transistor</b>, 5 lead - - - - - - - - - ->NAME ->VALUE - - - - - + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE @@ -835,6 +671,72 @@ You are welcome to use this library for commercial purposes. For attribution, we >NAME >VALUE + +<h3>ARM Cortex Debug Connector (10-pin)</h3> +<p>Specifications: +<ul><li>Pin count:10</li> +<li>Pin pitch:0.05"</li> +</ul></p> +<p><a href="https://www.samtec.com/ftppub/cpdf/FTSH-1XX-XX-XXX-DV-XXX-MKT.pdf">Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CORTEX_DEBUG</li> +</ul></p> + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + +<h3>Plated Through Hole - 4 Pin No Silk Outline</h3> +<p>Specifications: +<ul><li>Pin count:4</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_04</li> +</ul></p> + + + + + + + + +>NAME +>VALUE + @@ -864,6 +766,84 @@ You are welcome to use this library for commercial purposes. For attribution, we + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +stlb +stlr + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + @@ -905,8 +885,8 @@ design rules under a new name. - - + + @@ -949,10 +929,11 @@ design rules under a new name. - + + @@ -1053,443 +1034,370 @@ design rules under a new name. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - @@ -1499,82 +1407,36 @@ design rules under a new name. - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - @@ -1584,221 +1446,230 @@ design rules under a new name. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -1810,61 +1681,96 @@ design rules under a new name. - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + @@ -1872,41 +1778,27 @@ design rules under a new name. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + @@ -1914,36 +1806,31 @@ design rules under a new name. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + @@ -1951,112 +1838,123 @@ design rules under a new name. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - @@ -2064,1124 +1962,935 @@ design rules under a new name. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - + + + + + + + + + + + + + - - - - - - - - - - - + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - + + + + + + + + + + - - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - - + + + + + + - - - - + + - - + + - - - - - - - - - + + + + + + + + + + + + + + + - - - - - - - + + + + + + + + + + + + - - - - - + + + + + + + + + - - - - - - - + + + + + + + + - - - - + + + + - - + - - - + + + + + - - - - - - - - + + + + + + + + + - - - - + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - + - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + - - - - - - - - - - - - - - - - - - - + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + - - - - + + + + + - - - - - - - - + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - + + + + + + + - - - - - - - - - - - - - - - - - - - - + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + - - - - - - - - - + + + + + + + + + + + + + + - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + @@ -3189,307 +2898,532 @@ design rules under a new name. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + - - - - - + + + - - - + + - - - - - - - - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + - - - - - - - - - - - - - + + + + + + + + + + - - - - - - - - - - + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - -Since Version 6.2.2 text objects can contain more than one line, -which will not be processed correctly with this version. - - -Since Version 8.2, EAGLE supports online libraries. The ids -of those online libraries will not be understood (or retained) -with this version. - - -Since Version 8.3, EAGLE supports URNs for individual library -assets (packages, symbols, and devices). The URNs of those assets -will not be understood (or retained) with this version. - - -Since Version 8.3, EAGLE supports the association of 3D packages -with devices in libraries, schematics, and board files. Those 3D -packages will not be understood (or retained) with this version. - - diff --git a/circuit/mkbldcdriver/mkbldcdriver.sch b/circuit/mkbldcdriver/mkbldcdriver.sch index 08bb9bd3a052977f3b390532ef97edf604dd1d3f..778367b5dac9de63e3b677d97116b70fcd77fb00 100644 --- a/circuit/mkbldcdriver/mkbldcdriver.sch +++ b/circuit/mkbldcdriver/mkbldcdriver.sch @@ -1,19 +1,33 @@ - + - + + + + + + + + + + + + + + + - + @@ -213,1987 +227,855 @@ - -Default symbols for import LTspice schematics<p> -2012-10-29 alf@cadsoft.de<br> + - -<b>RESISTOR</b><p> -type 0204, grid 7.5 mm - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>RESISTOR</b><p> -type 0207, grid 10 mm - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>RESISTOR</b> chip<p> -Source: http://www.vishay.com/docs/20008/dcrcw.pdf - - - - - ->NAME ->VALUE - - -<b>RESISTOR</b> - - - - - - - - - - - ->NAME ->VALUE - - -<b>RESISTOR</b> - - - - - - - - - - - ->NAME ->VALUE - - -<b>RESISTOR</b><p> - - - - - - - - - - - ->NAME ->VALUE - - -<b>RESISTOR</b> - - - - - - - - - - - ->NAME ->VALUE - - -<b>RESISTOR</b> - - - - - - - - - - - ->NAME ->VALUE - - -<b>RESISTOR</b> - - - - - - - - - - - ->NAME ->VALUE - - -<b>CRCW1218 Thick Film, Rectangular Chip Resistors</b><p> -Source: http://www.vishay.com .. dcrcw.pdf - - - - - - ->NAME ->VALUE - - -<b>RESISTOR</b> - - - - - - - - - - ->NAME ->VALUE - - -<b>RESISTOR</b> - - - - - - - - - - - ->NAME ->VALUE - - -<b>RESISTOR</b> - - - - - - - - - - - ->NAME ->VALUE - - -<b>RESISTOR</b> - - - - - - - - - - - ->NAME ->VALUE - - -<b>RESISTOR</b> - - - - - - - - - - - ->NAME ->VALUE - - -<b>Package 4527</b><p> -Source: http://www.vishay.com/docs/31059/wsrhigh.pdf - - - - - - ->NAME ->VALUE - - -<b>RESISTOR</b> - - - - - - - - - - - ->NAME ->VALUE - - -<b>RESISTOR</b><p> -Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf - - - - - - - - - - - ->NAME ->VALUE - - -<b>NIS02 Chip Inductor</b><p> -Source: http://www.niccomp.com/Catalog/nis.pdf - - - - - - ->NAME ->VALUE - - -<b>INDUCTOR</b><p> -chip - - - - - - ->NAME ->VALUE - - -<b>INDUCTOR</b> - - - - - - - - - - - ->NAME ->VALUE - - -<b>INDUCTOR</b><p> -precision wire wound - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>INDUCTOR</b> - - - - - - - - - - - ->NAME ->VALUE - - -<b>INDUCTOR</b><p> -molded - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>INDUCTOR</b><p> -precision wire wound - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>INDUCTOR</b><p> -molded - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>INDUCTOR</b><p> -molded - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>INDUCTOR</b> - - - - - - - - - - - ->NAME ->VALUE - - -<b>INDUCTOR</b><p> -molded - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>INDUCTOR</b><p> -precision wire wound - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>INDUCTOR</b><p> -precision wire wound - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>INDUCTOR</b><p> -molded - - - - - - - - - - - - - ->NAME ->VALUE + + + + + + + + + + + + + +>NAME +>VALUE + + - -<b>INDUCTOR</b><p> -molded - - - - - - - - - - - - - ->NAME ->VALUE + + + + + + + + + + + + + + + + + + + + + + - - -RESISTOR -type 0204, grid 7.5 mm - - -RESISTOR -type 0207, grid 10 mm - - -RESISTOR chip -Source: http://www.vishay.com/docs/20008/dcrcw.pdf - - -RESISTOR - - -RESISTOR - - -RESISTOR - - -RESISTOR - - -RESISTOR - - -RESISTOR - - -CRCW1218 Thick Film, Rectangular Chip Resistors -Source: http://www.vishay.com .. dcrcw.pdf - - -RESISTOR - - -RESISTOR - - -RESISTOR - - -RESISTOR - - -RESISTOR - - -Package 4527 -Source: http://www.vishay.com/docs/31059/wsrhigh.pdf - - -RESISTOR - - -RESISTOR -Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf - - -NIS02 Chip Inductor -Source: http://www.niccomp.com/Catalog/nis.pdf - - -INDUCTOR -chip - - -INDUCTOR - - -INDUCTOR -precision wire wound - - -INDUCTOR - - -INDUCTOR -molded - - -INDUCTOR -precision wire wound - - -INDUCTOR -molded - - -INDUCTOR -molded - - -INDUCTOR - - -INDUCTOR -molded - - -INDUCTOR -precision wire wound - - -INDUCTOR -precision wire wound - - -INDUCTOR -molded - - -INDUCTOR -molded - - - - - - - - - ->NAME ->VALUE -SpiceOrder 1 -SpiceOrder 2 + + + + + +>NAME +>VALUE + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE -SpiceOrder 1 -SpiceOrder 2 + + + + + + + + + + + + + + +>NAME +>VALUE + + + + - -<B>RESISTOR</B>, European symbol + +SMD slide-switch AYZ0102AGRLC as found in the fablab inventory. Includes the mounting holes. + +<p>Made by Zaerc. - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + - - - - - - - + - + + + + + + + + - - + + + + - - - - - - - + - - - - - - - - - - - - - - - - + + + + + + + +<h3>64-pin QFN 9x9mm, 0.5mm pitch</h3> +<p>Package used by ATmega128RFA1</p> +<p><a href="http://www.atmel.com/Images/Atmel-8266-MCU_Wireless-ATmega128RFA1_Datasheet.pdf">Example Datasheet</a></p> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<B>INDUCTOR</B>, European symbol - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + - -<b>Power Transistors</b><p> -<author>Created by librarian@cadsoft.de</author> + - -<b>DirectFET (TM) Outline Dimension, MN Outline</b><p> -(Medium Size Can, N-Designation).<br> -Source: http://www.irf.com/product-info/datasheets/data/irf6648.pdf - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE + + + +>NAME +>VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - -<b>DirectFET Power MOSFET</b><p> -Source: http://www.irf.com/product-info/datasheets/data/irf6648.pdf - - - - - - - - - - - - - - - - - - - - - - - - - -<b>SMD SHUNT RESISTOR</b> - - - - - - - - ->NAME ->VALUE + + + + + + + + + +>NAME +>VALUE + + + - - + +<b>CAPACITOR</b><p> +chip + + + + + + + + + +>NAME +>VALUE + + + - - + + + + + + + + + +>NAME +>VALUE - - - - ->NAME ->VALUE + + + + + + + + + +>NAME +>VALUE + + + - - - - - - - - - - - - - ->NAME ->VALUE - - + + + + + + + + + + + + + +>NAME +>VALUE - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + +>NAME +>VALUE + + + + - -<b>Power TOPLED®</b><p> -Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE -R -G -B -A - - - - - - - - - - - - - - + + + + + + + +>NAME +>VALUE - - - - - - - - - - - - - - - - ->Value ->Name + + + + + + + + + +>NAME +>VALUE - - - - - - - - - - - - - - - - ->Name ->Value + + + + + + + + + +>NAME +>VALUE + + - - - - - - - - - - - - - - - - ->Name ->Value + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + - -<b>Power TOPLED®</b><p> -Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE -R -G -B -A - - - - - - - - - - - - - - + + + + + + + + + +>NAME +>VALUE + - - - - - - - - - ->NAME ->VALUE + + + + + + + +>NAME +>VALUE - - - - - + + + + + + + + + +>NAME +>VALUE - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + +>NAME +>VALUE + + + +<b>RESISTOR</b><p> +chip + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +>NAME +>VALUE + + + + +<B>DIODE</B><p> +2-lead molded, vertical + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +>NAME +>VALUE + + + + +>PACKAGE +>VOLTAGE +>TYPE - - - - -USB ->Name ->Value - - - - + + + + + + + + + +>NAME +>VALUE + + +>PACKAGE - - - - - - - - - - ->NAME ->VALUE - - + + + + + + + + + + +>NAME +>VALUE + + +>PRECISION +>PACKAGE - -<b>SMD SHUNT RESISTOR</b> + +<b>Capacitor</b> +Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. - + - + - - - - + + - + + + + + - - - - - - - - + - + + - + + + + + - + - + + - + + + + + - - - - - - - - + - - + + - + + + + + - - - -SMD slide-switch AYZ0102AGRLC as found in the fablab inventory. Includes the mounting holes. - -<p>Made by Zaerc. - - - - - + - - + + + + + - + - + - + - - - - + + - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + - - - - + + - + - - - - + + - - - -SMD micro USB connector as found in the fablab inventory. -Three footprint variants included: -<ol> -<li> original, as described by manufacturer's datasheet -<li> for milling with the 1/100" bit -<li> for milling with the 1/64" bit -</ol> -<p>Made by Zaerc. - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - + + - + - - - - + + - + - - - - + + @@ -2201,24 +1083,89 @@ Three footprint variants included: - + +<b>Resistor</b> +Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - + - + - - + + - + + + + - + - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2228,491 +1175,378 @@ Three footprint variants included: - + - -<h3>64-pin QFN 9x9mm, 0.5mm pitch</h3> -<p>Package used by ATmega128RFA1</p> -<p><a href="http://www.atmel.com/Images/Atmel-8266-MCU_Wireless-ATmega128RFA1_Datasheet.pdf">Example Datasheet</a></p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - + + - -<b>TAG-CONNECT ICSP Connector</b> - Legged version<BR><I>Manufacturer:</I> <a href="http://www.tag-connect.com">Tag-Connect</a> -<p> -Cable for easy In-Circuit Serial Programming. Designed for Microchip ICD2, suitable for many others. -<p> -<b>NOTE:</b> Eagle's default spacing for drill holes does not leave sufficent room for routing traces for this footprint and should be adjusted. <br> -This setting can be found in the board layout editor under the Edit menu. Select "Design Rules" and then the Distance tab. 8 mils for Drill/Hole works well. -<br> -<TABLE cellspacing=0 cellpadding=0 border=0> -<TR><TD width=20></TD><TD> -<TABLE cellspacing=0 cellpadding=1 border=1> -<TR bgcolor=silver><TD align=center>PAD</TD><TD align=center>Description</TD></TR> -<TR><TD align=center>1</TD><TD>MCLR/Vpp</TD></TR> -<TR><TD align=center>2</TD><TD>Vdd</TD></TR> -<TR><TD align=center>3</TD><TD>GND</TD></TR> -<TR><TD align=center>4</TD><TD>PGD (ISPDAT)</TD></TR> -<TR><TD align=center>5</TD><TD>PGC (ISPCLK)</TD></TR> -<TR><TD align=center>6</TD><TD>nc (used for LVP)</TD></TR> -</TABLE> -</TD></TR></TABLE><BR><BR> -©2009 ROFA.cz - modified and updated by Robert Darlington &#8249;rdarlington@gmail.com&#8250; - - - - - - ->name - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + - -<B>TAG-CONNECT ICSP Connector</B><BR><I>Manufacturer:</I> <a href="www.tag-connect.com">Tag-Connect</a><BR> -<BR>Cable for easy In-Circuit Serial Programming. Designed for Microchip ICD2, suitable for many others.<BR> - -<TABLE cellspacing=0 cellpadding=0 border=0> -<TR><TD width=20></TD><TD> -<TABLE cellspacing=0 cellpadding=1 border=1> -<TR bgcolor=silver><TD align=center>PAD</TD><TD align=center>Description</TD></TR> -<TR><TD align=center>1</TD><TD>MCLR/Vpp</TD></TR> -<TR><TD align=center>2</TD><TD>Vdd</TD></TR> -<TR><TD align=center>3</TD><TD>GND</TD></TR> -<TR><TD align=center>4</TD><TD>PGD (ISPDAT)</TD></TR> -<TR><TD align=center>5</TD><TD>PGC (ISPCLK)</TD></TR> -<TR><TD align=center>6</TD><TD>nc (used for LVP)</TD></TR> -</TABLE> -</TD></TR></TABLE><BR><BR> - -©2009 ROFA.cz - modified and updated by Robert Darlington &#8249;rdarlington@gmail.com&#8250; - - - - - - ->name - - - - - - - - - - - - - - - - - - - - - - - - - + + - -<B>TAG-CONNECT ICSP Connector</B><I>- with optional copper pads for steel alignment pins</I><BR><I>Manufacturer:</I> <a href="http://www.tag-connect.com">Tag-Connect</a><BR> -<BR>Cable for easy In-Circuit Serial Programming. Designed for Microchip ICD2, suitable for many others. -<p> -<b>NOTE:</b> Eagle's default spacing for drill holes does not leave sufficent room for routing traces for this footprint and should be adjusted. <br> -This setting can be found in the board layout editor under the Edit menu. Select "Design Rules" and then the Distance tab. 8 mils for Drill/Hole works well. -<br> -<TABLE cellspacing=0 cellpadding=0 border=0> -<TR><TD width=20></TD><TD> -<TABLE cellspacing=0 cellpadding=1 border=1> -<TR bgcolor=silver><TD align=center>PAD</TD><TD align=center>Description</TD></TR> -<TR><TD align=center>1</TD><TD>MCLR/Vpp</TD></TR> -<TR><TD align=center>2</TD><TD>Vdd</TD></TR> -<TR><TD align=center>3</TD><TD>GND</TD></TR> -<TR><TD align=center>4</TD><TD>PGD (ISPDAT)</TD></TR> -<TR><TD align=center>5</TD><TD>PGC (ISPCLK)</TD></TR> -<TR><TD align=center>6</TD><TD>nc (used for LVP)</TD></TR> -</TABLE> -</TD></TR></TABLE><BR><BR> - -<B>Note:</B> Suitable Receptacle pins are 0295-0-15-xx-06-xx-10-0 series from <a href="www.mill-max.com">Mill-Max</a><BR><BR> - -©2009 ROFA.cz - modified and updated by Robert Darlington &#8249;rdarlington@gmail.com&#8250; - - - - - - ->name - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + - - - - - + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - + + + + + - - - - - + + + + + - - - - - + + + + + - - - - - + + + + + - - - - - + + + + + - - - - - + + + + + + + + +<b>SMD SHUNT RESISTOR</b> + + + + + + + + +>NAME +>VALUE + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +>NAME +>VALUE + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2720,64 +1554,101 @@ This setting can be found in the board layout editor under the Edit menu. Selec - -<h3>TAG-CONNECT ICSP Connector</h3><BR><I>Manufacturer:</I> <a href="http://www.tag-connect.com">Tag-Connect</a><BR> -<BR>Cable for easy In-Circuit Serial Programming. Designed for Microchip ICD2, suitable for many others.<BR> -Two variants - one "with legs" (for hands-free fit on PCB) and another "without legs" for quick programming. - -<p> -<TABLE cellspacing=0 cellpadding=0 border=0> -<TR><TD width=20></TD><TD> -<TABLE cellspacing=0 cellpadding=1 border=1> -<TR bgcolor=silver><TD align=center>PAD</TD><TD align=center>Description</TD></TR> -<TR><TD align=center>1</TD><TD>MCLR/Vpp</TD></TR> -<TR><TD align=center>2</TD><TD>Vdd</TD></TR> -<TR><TD align=center>3</TD><TD>GND</TD></TR> -<TR><TD align=center>4</TD><TD>PGD (ISPDAT)</TD></TR> -<TR><TD align=center>5</TD><TD>PGC (ISPCLK)</TD></TR> -<TR><TD align=center>6</TD><TD>nc (used for LVP)</TD></TR> -</TABLE> -</TD></TR></TABLE><BR><BR> - -©2009 ROFA.cz - modified and updated by Robert Darlington &#8249;rdarlington@gmail.com&#8250; + - + - + - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - + + + +<b>Resistor</b> +Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + + + + + - - - - - - + + + + - + - - - - - - + + + + @@ -2785,931 +1656,593 @@ Two variants - one "with legs" (for hands-free fit on PCB) and another "without - - - - - - - ->NAME ->VALUE - - - - - - - - - - ->NAME ->VALUE - - - - - -<b>CAPACITOR</b><p> -chip - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - ->NAME ->VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<h3>SparkFun Connectors</h3> +This library contains electrically-functional connectors. +<br> +<br> +We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. +<br> +<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. +<br> +<br> +<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ +<br> +<br> +You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + +<h3>JST SH Vertical 6-Pin SMT</h3> +<p>Specifications: +<ul><li>Pin count:6</li> +<li>Pin pitch: 1 mm</li> +</ul></p> +<p><a href=”https://www.sparkfun.com/datasheets/GPS/EM406-SMDConnector-eSH.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>JST_6PIN_VERTICAL</li> +</ul></p> + + + + + + + + + + + + + + +>NAME +>VALUE - - - - - - - - - ->NAME ->VALUE + +<h3>Plated Through Hole -8 Pin</h3> +<p>Specifications: +<ul><li>Pin count:8</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_08</li> +</ul></p> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE - - - - - - - - - ->NAME ->VALUE - - - - -<b>CAPACITOR</b><p> -chip - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - ->NAME ->VALUE - + +<h3>Plated Through Hole -8 Pin Locking Footprint</h3> +Holes are offset 0.005", to hold pins in place during soldering. +<p>Specifications: +<ul><li>Pin count:8</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_08</li> +</ul></p> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE - - - - - - - ->NAME ->VALUE + +<h3>Plated Through Hole -8 Pin Locking Footprint with Long Pads</h3> +Holes are offset 0.005", to hold pins in place during soldering. +<p>Specifications: +<ul><li>Pin count:8</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_08</li> +</ul></p> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE - - - - - - - - - ->NAME ->VALUE + +<h3>Plated Through Hole -8 Pin Long Pads</h3> +<p>Specifications: +<ul><li>Pin count:8</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_08</li> +</ul></p> + + + + + + + + + + + + + + + + + + +>NAME +>VALUE - - - - - - - - - ->NAME ->VALUE - + +<h3>Screw Terminal 3.5mm Pitch -8 Pin PTH</h3> +<p>Specifications: +<ul><li>Pin count: 8</li> +<li>Pin pitch: 3.5mm/138mil</li> +</ul></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_08</li> +</ul></p> + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + - -<b>RESISTOR</b><p> -chip - - - - - - - - - - ->NAME ->VALUE - - + +<h3>SMD -8 Pin Vertical Female</h3> +<p>Specifications: +<ul><li>Pin count:8</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_08</li> +</ul></p> + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE - - - - - ->NAME ->VALUE - - + +<h3>SMD -8 Pin Vertical Female</h3> +Alternate pin configuration +<p>Specifications: +<ul><li>Pin count:8</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_08</li> +</ul></p> + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE - -<B>DIODE</B><p> -2-lead molded, vertical - - - - - - - - ->NAME ->VALUE - - - - - - + +<h3>SMD -8 Pin Vertical Female</h3> +Combined footprint configuration +<p>Specifications: +<ul><li>Pin count:8</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_08</li> +</ul></p> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE - - - - - ->NAME ->VALUE - - - - ->PACKAGE ->VOLTAGE ->TYPE - - - - - - - - - - ->NAME ->VALUE - - ->PACKAGE - - - - - - - - - - - ->NAME ->VALUE - - ->PRECISION ->PACKAGE - - - - -<b>Capacitor</b> -Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<b>Resistor</b> -Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - -<b>Small Outline Transistor</b>, 5 lead - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<h3>SparkFun Connectors</h3> -This library contains electrically-functional connectors. -<br> -<br> -We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. -<br> -<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. -<br> -<br> -<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ -<br> -<br> -You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. - - -<h3>JST SH Vertical 6-Pin SMT</h3> + +<h3>JST Vertical Crimp Connect</h3> <p>Specifications: -<ul><li>Pin count:6</li> -<li>Pin pitch: 1 mm</li> +<ul><li>Pin count: 8</li> +<li>Pin pitch:1mm</li> </ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/GPS/EM406-SMDConnector-eSH.pdf”>Datasheet referenced for footprint</a></p> +<p><a href=”http://www.jst-mfg.com/product/pdf/eng/eSR.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>JST_6PIN_VERTICAL</li> +<ul><li>CONN_08</li> </ul></p> - - - - - - - - - - - - - - ->NAME ->VALUE + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE - -<h3>Plated Through Hole -8 Pin</h3> + +<h3>SMD -8 Pin Vertical Male</h3> +<p>Specifications: +<ul><li>Pin count:8</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_08</li> +</ul></p> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<h3>Plated Through Hole -8 Pin No Silk</h3> <p>Specifications: <ul><li>Pin count:8</li> <li>Pin pitch:0.1"</li> @@ -3717,56 +2250,6 @@ You are welcome to use this library for commercial purposes. For attribution, we <p>Example device(s): <ul><li>CONN_08</li> </ul></p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -3786,8 +2269,8 @@ You are welcome to use this library for commercial purposes. For attribution, we >NAME >VALUE - -<h3>Plated Through Hole -8 Pin Locking Footprint</h3> + +<h3>Plated Through Hole -8 Pin Locking Footprint No Silk</h3> Holes are offset 0.005", to hold pins in place during soldering. <p>Specifications: <ul><li>Pin count:8</li> @@ -3796,27 +2279,146 @@ Holes are offset 0.005", to hold pins in place during soldering. <p>Example device(s): <ul><li>CONN_08</li> </ul></p> - - - - - - - - - - - - + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<h3>Plated Through Hole -8 Pin Locking Female Headers</h3> +Holes are offset 0.005" to hold pins in place during soldering. +<p>Specifications: +<ul><li>Pin count:8</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p><a href=”https://cdn.sparkfun.com/datasheets/Prototyping/SP-140520-XX-001.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_08</li> +</ul></p> + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<h3>ARM Cortex Debug Connector (10-pin)</h3> +<p>Specifications: +<ul><li>Pin count:10</li> +<li>Pin pitch:0.05"</li> +</ul></p> +<p><a href="https://www.samtec.com/ftppub/cpdf/FTSH-1XX-XX-XXX-DV-XXX-MKT.pdf">Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CORTEX_DEBUG</li> +</ul></p> + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + +<h3>Plated Through Hole - 2x5 ARM Cortex Debug Connector (10-pin)</h3> +<p>tDoc (51) layer border represents maximum dimensions of plastic housing.</p> +<p>Specifications: +<ul><li>Pin count:10</li> +<li>Pin pitch:1.27mm</li> +</ul></p> +<p><a href=”http://portal.fciconnect.com/Comergent//fci/drawing/20021111.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_05x2</li> +</ul></p> + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<h3>Plated Through Hole - 4 Pin</h3> +<p>Specifications: +<ul><li>Pin count:4</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_04</li> +</ul></p> - - - - - - - - + + @@ -3839,568 +2441,958 @@ Holes are offset 0.005", to hold pins in place during soldering. - - - - - - - - - - - - - - - - - - + + + + + - >NAME >VALUE - -<h3>Plated Through Hole -8 Pin Locking Footprint with Long Pads</h3> -Holes are offset 0.005", to hold pins in place during soldering. -<p>Specifications: -<ul><li>Pin count:8</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_08</li> -</ul></p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Plated Through Hole -8 Pin Long Pads</h3> + +<h3>Molex 4-Pin Plated Through-Hole</h3> <p>Specifications: -<ul><li>Pin count:8</li> +<ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_08</li> +<ul><li>CONN_04</li> </ul></p> - - - - - - - - - - - - - - - - - - ->NAME ->VALUE + + + + + + + + + + + + + +>NAME +>VALUE - -<h3>Screw Terminal 3.5mm Pitch -8 Pin PTH</h3> + +<h3>Screw Terminal 3.5mm Pitch -4 Pin PTH</h3> <p>Specifications: -<ul><li>Pin count: 8</li> +<ul><li>Pin count: 4</li> <li>Pin pitch: 3.5mm/138mil</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_08</li> +<ul><li>CONN_04</li> </ul></p> - - - - + + + + - + - - - - + + + + + + + + - - - - ->NAME ->VALUE - - - - -<h3>SMD -8 Pin Vertical Female</h3> -<p>Specifications: -<ul><li>Pin count:8</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_08</li> -</ul></p> - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE +>NAME +>VALUE - -<h3>SMD -8 Pin Vertical Female</h3> -Alternate pin configuration + +<h3>Plated Through Hole - 4 Pin</h3> <p>Specifications: -<ul><li>Pin count:8</li> -<li>Pin pitch:0.1"</li> +<ul><li>Pin count:4</li> +<li>Pin pitch: 1.27mm</li> </ul></p> -<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_08</li> +<ul><li>CONN_04</li> </ul></p> - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE - -<h3>SMD -8 Pin Vertical Female</h3> -Combined footprint configuration + +<h3>Plated Through Hole - 4 Pin Locking Footprint</h3> +Pins are offset 0.005" from center to lock pins in place during soldering. <p>Specifications: -<ul><li>Pin count:8</li> +<ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul></p> -<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_08</li> +<ul><li>CONN_04</li> </ul></p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE - -<h3>JST Vertical Crimp Connect</h3> + +<h3>Plated Through Hole - 4 Pin Long Pads w/ Locking Footprint</h3> +Holes are offset 0.005" from center to lock pins in place during soldering. <p>Specifications: -<ul><li>Pin count: 8</li> -<li>Pin pitch:1mm</li> +<ul><li>Pin count:4</li> +<li>Pin pitch:0.1"</li> </ul></p> -<p><a href=”http://www.jst-mfg.com/product/pdf/eng/eSR.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_08</li> +<ul><li>CONN_04</li> </ul></p> - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE - -<h3>SMD -8 Pin Vertical Male</h3> + +<h3>Molex 4-Pin Plated Through-Hole Locking</h3> +Holes are offset 0.005" from center to hold pins in place during soldering. <p>Specifications: -<ul><li>Pin count:8</li> +<ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul></p> -<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint</a></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_08</li> +<ul><li>CONN_04</li> </ul></p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE + + + + + + + + + + + + + +>NAME +>VALUE - -<h3>Plated Through Hole -8 Pin No Silk</h3> + +<h3>SMD - 4 Pin Right Angle Male Header</h3> +tDocu layer shows pin locations. <p>Specifications: -<ul><li>Pin count:8</li> +<ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): -<ul><li>CONN_08</li> +<ul><li>CONN_04</li> </ul></p> - - - - - - - - - - - + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<h3>Plated Through Hole - 4 Pin Long Pads</h3> +<p>Specifications: +<ul><li>Pin count:4</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_04</li> +</ul></p> + + + + + + - ->NAME ->VALUE +>NAME +>VALUE - -<h3>Plated Through Hole -8 Pin Locking Footprint No Silk</h3> -Holes are offset 0.005", to hold pins in place during soldering. + +<h3>Plated Through Hole - 4 Pin No Silk Outline</h3> <p>Specifications: -<ul><li>Pin count:8</li> +<ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): -<ul><li>CONN_08</li> +<ul><li>CONN_04</li> </ul></p> - - - - - - - - - - - + + + + - >NAME >VALUE - -<h3>Plated Through Hole -8 Pin Locking Female Headers</h3> -Holes are offset 0.005" to hold pins in place during soldering. + +<h3>JST Right Angle 4 Pin Plated Through Hole</h3> <p>Specifications: -<ul><li>Pin count:8</li> +<ul><li>Pin count: 4</li> +<li>Pin pitch: 2mm</li> +</ul></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_04</li> +</ul></p> + + + + ++ +- +S +S + + + + + + + +>NAME +>VALUE + + +<h3>Screw Terminal 3.5mm Pitch -4 Pin PTH Locking</h3> +Holes are offset 0.005" from center to hold pins in place during soldering. +<p>Specifications: +<ul><li>Pin count: 4</li> +<li>Pin pitch: 3.5mm/138mil</li> +</ul></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_04</li> +</ul></p> + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<h3>SMD- 4 Pin Right Angle </h3> +<p>Specifications: +<ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul></p> -<p><a href=”https://cdn.sparkfun.com/datasheets/Prototyping/SP-140520-XX-001.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_08</li> +<ul><li>CONN_04</li> +</ul></p> + + + + + + + + + + + + +>NAME +>VALUE + + +<h3>SMD - 4 Pin Vertical Connector</h3> +<p>Specifications: +<ul><li>Pin count:4</li> +<li>SMD Pad count:8</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_04</li> +</ul></p> + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<h3>SMD - 4 Pin w/ Long Solder Pads</h3> +No silk, but tDocu layer shows pin position. +<p>Specifications: +<ul><li>Pin count:4</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_04</li> +</ul></p> + + + + + + + + + + + + + + + + + + + + +<h3>JST Vertical 4 Pin Plated Through Hole</h3> +<p>Specifications: +<ul><li>Pin count: 4</li> +<li>Pin pitch: 2mm</li> +</ul></p> +<p><a href="http://www.jst-mfg.com/product/pdf/eng/ePH.pdf">Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_04</li> +</ul></p> + + + + + + + + + + + + ++ +- +Y +B +>NAME +>VALUE + + +<h3>SMD - 4 Pin Right-Angle Female Header</h3> +Silk outline shows header location. +<p>Specifications: +<ul><li>Pin count:4</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_04</li> +</ul></p> + + + + + + + + + + + + +>NAME +>VALUE + + + + +<h3>6 Pin Connection</h3> + + + + + + + + + + +>VALUE +>NAME + + + + + + + + +<h3>2 Pin Connection</h3> + + + + + + +>VALUE +>NAME + + + + +<h3> 8 Pin Connection</h3> + + + + + + + + + + + + +>VALUE +>NAME + + + + + + + + + + +<h3>Cortex Debug Connector</h3> +<p><a href="http://infocenter.arm.com/help/topic/com.arm.doc.faqs/attached/13634/cortex_debug_connectors.pdf">Datasheet</a></p> + + + + + + + + + + + + + + +>Name +>Value + + +<h3>4 Pin Connection</h3> + + + + + + + + +>VALUE +>NAME + + + + + + + + +<h3>JST 6 pin horizontal connector</h3> +JST-SH type. + +<p></p> +<b>Here is the connector we sell at SparkFun:</b> +<ul> +<li><a href="link">name</a> (XXX-00000)</li> +<li><a href="http://www.sparkfun.com/datasheets/GPS/EM406-SMDConnector-eSH.pdf">Datasheet</a> +</ul> + +<p></p> +<b>It was used on these SparkFun products:</b> +<ul> +<li><a href="link">name</a> (XXX-00000)</li> +<li><a href="link">name</a> (XXX-00000)</li> +</ul> + + + + + + + + + + + + + + + + + + + + + + + + + + +<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> + +<p></p> +<b>On any of the 0.1 inch spaced packages, you can populate with these:</b> +<ul> +<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> +<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> +<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> +<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> +<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> +<li><a href="https://www.sparkfun.com/products/9279"> Arduino Stackable Header - 8 Pin</a> (PRT-09279)</li> +</ul> + +<p></p> +<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b> +<ul> +<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li> +</ul> + +<p></p> +<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b> +<ul> +<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> +<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> +<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> +<p></p> +</ul> + +<p></p> +<b>Special notes:</b> +<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208 +<p></p> +NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... +This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<h3>Cortex Debug Connector - 10 pin</h3> +<p>Supports JTAG debug, Serial Wire debug, and Serial Wire Viewer. +PTH and SMD connector options available.</p> +<p> <ul><a href=”http://infocenter.arm.com/help/topic/com.arm.doc.faqs/attached/13634/cortex_debug_connectors.pdf”>General Connector Information</a> +<p><b> Products:</b> +<ul><li><a href=”http://www.digikey.com/product-detail/en/cnc-tech/3220-10-0100-00/1175-1627-ND/3883661”>PTH Connector</a> -via Digi-Key</li> +<li><a href=”https://www.sparkfun.com/products/13229”>SparkFun PSoc</a></li> +<li><a href=”https://www.sparkfun.com/products/13810”>SparkFun T</a></li> </ul></p> - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - -<h3>6 Pin Connection</h3> - - - - - - - - - - ->VALUE ->NAME - - - - - - - - -<h3>2 Pin Connection</h3> - - - - - - ->VALUE ->NAME - - - - -<h3> 8 Pin Connection</h3> - - - - - - - - - - - - ->VALUE ->NAME - - - - - - - - - - - - -<h3>JST 6 pin horizontal connector</h3> -JST-SH type. - -<p></p> -<b>Here is the connector we sell at SparkFun:</b> -<ul> -<li><a href="link">name</a> (XXX-00000)</li> -<li><a href="http://www.sparkfun.com/datasheets/GPS/EM406-SMDConnector-eSH.pdf">Datasheet</a> -</ul> - -<p></p> -<b>It was used on these SparkFun products:</b> -<ul> -<li><a href="link">name</a> (XXX-00000)</li> -<li><a href="link">name</a> (XXX-00000)</li> -</ul> - - + - + - - - - - - - - + + + + + + + + + + - - - - + + + + + + + + + + + + + + + + + + - + <h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> <p></p> @@ -4411,7 +3403,6 @@ JST-SH type. <li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> <li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> <li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> -<li><a href="https://www.sparkfun.com/products/9279"> Arduino Stackable Header - 8 Pin</a> (PRT-09279)</li> </ul> <p></p> @@ -4431,227 +3422,233 @@ JST-SH type. <p></p> <b>Special notes:</b> -<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208 -<p></p> -NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... -This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side. +<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208 - + - + - - - - - + - + - - - - - + + + + - + - - - - - + + + + - + - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - + + + - + - - - - - - + - + - - - - - - + + - + - - - - - - - - + - + - - - - - + + - + - - - - - - + + - + - - - - - + + - + - - - - - + + + - + - - - - - - + @@ -4849,6 +3846,391 @@ Diode with low voltage drop + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +stlb +stlr + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +stlb +stlr + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +RJ12 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +LED 1206 pads (standard pattern) + + + + + + + + +>NAME +>VALUE + + + + +LED1206 FAB style (smaller pads to allow trace between) + + + + + + +>NAME +>VALUE + + +5mm round through hole part. + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +>NAME +>VALUE + + + + + + + + +LED + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + +LED + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -4859,48 +4241,40 @@ Diode with low voltage drop - - - - - - - + + - - - - + + + + - - + + - - - - - - - + + + + - - - + + + - - - - - - + + + + + + @@ -4910,49 +4284,24 @@ Diode with low voltage drop - + - - - + + + - - - - + - - - - - - - - - - - - - - + - - - - - - + + - - - - - @@ -4961,50 +4310,17 @@ Diode with low voltage drop - - - - - - - - - - - - - - - - - - - - - - + + - - - - - - - - - - - - - @@ -5018,17 +4334,14 @@ Diode with low voltage drop - + - - - + - @@ -5039,11 +4352,53 @@ Diode with low voltage drop - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -5051,35 +4406,27 @@ Diode with low voltage drop connect to SL_U on DRV - - - + - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + @@ -5103,48 +4450,23 @@ Diode with low voltage drop - - - - - - - - - - + + + + + + + + - - - - - - - - - - - - - - - + - - - - - - - - - - - + + + + - - @@ -5153,52 +4475,19 @@ Diode with low voltage drop - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + - - - - - - - - - - - - + @@ -5207,35 +4496,74 @@ Diode with low voltage drop - - - - - + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -5246,55 +4574,52 @@ Diode with low voltage drop diff --git a/datasheet/AS5045B_Datasheet_EN_v2.pdf b/datasheet/AS5045B_Datasheet_EN_v2.pdf new file mode 100644 index 0000000000000000000000000000000000000000..da240c1d2980aa0f487ae831919aaa52c03d1393 Binary files /dev/null and b/datasheet/AS5045B_Datasheet_EN_v2.pdf differ diff --git a/datasheet/csd88599q5dc.pdf b/datasheet/csd88599q5dc.pdf new file mode 100644 index 0000000000000000000000000000000000000000..15d094c80a9b18ce5413ff5b59c09776de2a4ec6 Binary files /dev/null and b/datasheet/csd88599q5dc.pdf differ