<b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>>VALUE>VALUE>VALUE<b>SUPPLY SYMBOL</b><b>SUPPLY SYMBOL</b><b>SUPPLY SYMBOL</b>>NAME>VALUE>NAME>VALUE>NAME>VALUESMD slide-switch AYZ0102AGRLC as found in the fablab inventory. Includes the mounting holes.
<p>Made by Zaerc.<h3>64-pin QFN 9x9mm, 0.5mm pitch</h3>
<p>Package used by ATmega128RFA1</p>
<p><a href="http://www.atmel.com/Images/Atmel-8266-MCU_Wireless-ATmega128RFA1_Datasheet.pdf">Example Datasheet</a></p>>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE>NAME>VALUE<B>DIODE</B><p>
2-lead molded, vertical>NAME>VALUE>NAME>VALUE>PACKAGE>VOLTAGE>TYPE>NAME>VALUE>PACKAGE>NAME>VALUE>PRECISION>PACKAGE<b>Capacitor</b>
Standard 0603 ceramic capacitor, and 0.1" leaded capacitor.<b>Resistor</b>
Basic schematic elements and footprints for 0603, 1206, and PTH resistors.>NAME>VALUE<b>SMD SHUNT RESISTOR</b>>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>Resistor</b>
Basic schematic elements and footprints for 0603, 1206, and PTH resistors.<h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>JST SH Vertical 6-Pin SMT</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch: 1 mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/GPS/EM406-SMDConnector-eSH.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>JST_6PIN_VERTICAL</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin</h3>
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin Locking Footprint</h3>
Holes are offset 0.005", to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin Locking Footprint with Long Pads</h3>
Holes are offset 0.005", to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -8 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 8</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>SMD -8 Pin Vertical Female</h3>
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>SMD -8 Pin Vertical Female</h3>
Alternate pin configuration
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>SMD -8 Pin Vertical Female</h3>
Combined footprint configuration
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>JST Vertical Crimp Connect</h3>
<p>Specifications:
<ul><li>Pin count: 8</li>
<li>Pin pitch:1mm</li>
</ul></p>
<p><a href=”http://www.jst-mfg.com/product/pdf/eng/eSR.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>SMD -8 Pin Vertical Male</h3>
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin No Silk</h3>
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin Locking Footprint No Silk</h3>
Holes are offset 0.005", to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin Locking Female Headers</h3>
Holes are offset 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://cdn.sparkfun.com/datasheets/Prototyping/SP-140520-XX-001.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>ARM Cortex Debug Connector (10-pin)</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.05"</li>
</ul></p>
<p><a href="https://www.samtec.com/ftppub/cpdf/FTSH-1XX-XX-XXX-DV-XXX-MKT.pdf">Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CORTEX_DEBUG</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x5 ARM Cortex Debug Connector (10-pin)</h3>
<p>tDoc (51) layer border represents maximum dimensions of plastic housing.</p>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:1.27mm</li>
</ul></p>
<p><a href=”http://portal.fciconnect.com/Comergent//fci/drawing/20021111.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_05x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 4 Pin</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Molex 4-Pin Plated Through-Hole</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -4 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 4 Pin</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch: 1.27mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 4 Pin Locking Footprint</h3>
Pins are offset 0.005" from center to lock pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 4 Pin Long Pads w/ Locking Footprint</h3>
Holes are offset 0.005" from center to lock pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Molex 4-Pin Plated Through-Hole Locking</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>SMD - 4 Pin Right Angle Male Header</h3>
tDocu layer shows pin locations.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 4 Pin Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 4 Pin No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>JST Right Angle 4 Pin Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>+-SS>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -4 Pin PTH Locking</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>SMD- 4 Pin Right Angle </h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>SMD - 4 Pin Vertical Connector</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>SMD Pad count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>SMD - 4 Pin w/ Long Solder Pads</h3>
No silk, but tDocu layer shows pin position.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p><h3>JST Vertical 4 Pin Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href="http://www.jst-mfg.com/product/pdf/eng/ePH.pdf">Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>+-YB>NAME>VALUE<h3>SMD - 4 Pin Right-Angle Female Header</h3>
Silk outline shows header location.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>6 Pin Connection</h3>>VALUE>NAME<h3>2 Pin Connection</h3>>VALUE>NAME<h3> 8 Pin Connection</h3>>VALUE>NAME<h3>Cortex Debug Connector</h3>
<p><a href="http://infocenter.arm.com/help/topic/com.arm.doc.faqs/attached/13634/cortex_debug_connectors.pdf">Datasheet</a></p>>Name>Value<h3>4 Pin Connection</h3>>VALUE>NAME<h3>JST 6 pin horizontal connector</h3>
JST-SH type.
<p></p>
<b>Here is the connector we sell at SparkFun:</b>
<ul>
<li><a href="link">name</a> (XXX-00000)</li>
<li><a href="http://www.sparkfun.com/datasheets/GPS/EM406-SMDConnector-eSH.pdf">Datasheet</a>
</ul>
<p></p>
<b>It was used on these SparkFun products:</b>
<ul>
<li><a href="link">name</a> (XXX-00000)</li>
<li><a href="link">name</a> (XXX-00000)</li>
</ul><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
<li><a href="https://www.sparkfun.com/products/9279"> Arduino Stackable Header - 8 Pin</a> (PRT-09279)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208
<p></p>
NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS...
This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side.<h3>Cortex Debug Connector - 10 pin</h3>
<p>Supports JTAG debug, Serial Wire debug, and Serial Wire Viewer.
PTH and SMD connector options available.</p>
<p> <ul><a href=”http://infocenter.arm.com/help/topic/com.arm.doc.faqs/attached/13634/cortex_debug_connectors.pdf”>General Connector Information</a>
<p><b> Products:</b>
<ul><li><a href=”http://www.digikey.com/product-detail/en/cnc-tech/3220-10-0100-00/1175-1627-ND/3883661”>PTH Connector</a> -via Digi-Key</li>
<li><a href=”https://www.sparkfun.com/products/13229”>SparkFun PSoc</a></li>
<li><a href=”https://www.sparkfun.com/products/13810”>SparkFun T</a></li>
</ul></p><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208<h3>SparkFun Discrete Semiconductors</h3>
This library contains diodes, optoisolators, TRIACs, MOSFETs, transistors, etc.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<B>Diode</B>
<p>Basic SMA packaged diode. Good for reverse polarization protection. Common part #: MBRA140</p>
<p>SMA is the smallest package in the DO-214 standard (DO-214AC)</p>>NAME>VALUESOD-323 (Small Outline Diode)>NAME>VALUESOD-523 (Small Outline Diode)SOT23-3>NAME>VALUE<h3> Schottky Diode</h3>
Diode with low voltage drop>NAME>VALUE<h3>Schottky diode</h3>
<p>A Schottky diode is a semiconductor diode which has a low forward voltage drop and a very fast switching action.</p>stlbstlrstlbstlr>NAME>VALUERJ12LED 1206 pads (standard pattern)>NAME>VALUELED1206 FAB style (smaller pads to allow trace between)>NAME>VALUE5mm round through hole part.>NAME>VALUE>NAME>VALUELED>NAME>VALUELEDconnect to SL_U on DRV
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.