Commit 185a2cfd authored by Jake Read's avatar Jake Read

add images new board

parent da5e8b39
......@@ -10,6 +10,14 @@ It works! If you have one, it should forward packets no problem. Let me know if
## Next Steps
Did a redesign for this using the ATSAMD51 and USB-Serial on-chip conversion so that networks can run at 1-3MBaud, not 0.1MBaud. That board is out to the house.
# New Board
- is out to fab
![routed](/images/rpi-routed.png)
![schematic](/images/rpi-schematic.png)
# Board Design
I use the ATSAMS70 micro, which is very fast but still simple enough. 300Mhz and the I/O we need.
......
......@@ -116,7 +116,7 @@ Sheet="1"
Type="Board Editor"
Number=2
File="mkrouter-v06.brd"
View="-7.53393 -39.1256 106.182 122.531"
View="8.91433 -8.23208 87.8837 104.029"
WireWidths=" 0.0762 0.1016 0.127 0.15 0.4064 0.508 0.6096 2.54 0.2 0.254 0.2032 0.3048 1.27 1.016 0.8128 0.1524"
PadDiameters=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0"
PadDrills=" 0.2 0.25 0.35 0.4 0.45 0.5 0.55 0.65 0.7 0.75 0.8 0.85 0.9 1 0.6 0.3"
......@@ -161,7 +161,7 @@ Type="Control Panel"
Number=0
[Desktop]
Screen="6000 2160"
Screen="3840 1080"
Window="Win_1"
Window="Win_2"
Window="Win_3"
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment