Commit 3b07a199 by Jake Read

Update purchase-parts.md

parent 9046df17
......@@ -9,6 +9,13 @@
## Motors
- [4x NEMA 23 57x57x56 w/ 6.32mm Shaft w/ D w/ 400 Steps / Rev](https://www.omc-stepperonline.com/hybrid-stepper-motor/nema-23-bipolar-09deg-126nm-1784ozin-28a-25v-57x57x56mm-4-wires-23hm22-2804s.html)
## Tooling
- 1/8" O-Cutter Upcut
- 1/4" O-Cutter Upcut
- 1/2" 90deg Chamfer Endmill
- 1/16" 2-Flute Endmill w/ at least 5mm DOC
- M5 Tap
## Hardware
- SHCS M5x12 (Motor Mounting) - 91292A125
- SHCS M5x20
......@@ -21,13 +28,6 @@
- Glide Blocks: 3/8" x 12x24" Acetal (Delrin) Sheet
- Pinions: 1" x 2x6" Acetal (Delrin) Bar
## Tooling
- 1/8" O-Cutter Upcut
- 1/4" O-Cutter Upcut
- 1/2" 90deg Chamfer Endmill
- 1/16" 2-Flute Endmill w/ at least 5mm DOC
- M5 Tap
## End Effector Showdown
- A Router
- For you, for machine week, roll BLDC controller and do spindle-on-pulley on ER20 ? :o
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment