Commit 3f866b96 by Jake Read

pparts

parent b3285dbb
.bak
**/*.bak
/local
.rhl
.3dmbak
\ No newline at end of file
**/*.rhl
**/*.3dmbak
\ No newline at end of file
Jake
JARVIS
Friday, October 27, 2017
\ No newline at end of file
Jake
JARVIS
Friday, October 27, 2017
\ No newline at end of file
## but what does it say
- face the mating surfaces of rails, this way you can be sure of chamfer-to-bottom distance
## Controller
- [TinyG](https://github.com/synthetos/TinyG/wiki)
......@@ -10,14 +9,31 @@
## Motors
- [4x NEMA 23 57x57x56 w/ 6.32mm Shaft w/ D w/ 400 Steps / Rev](https://www.omc-stepperonline.com/hybrid-stepper-motor/nema-23-bipolar-09deg-126nm-1784ozin-28a-25v-57x57x56mm-4-wires-23hm22-2804s.html)
## End Effector Showdown
## Hardware
- SHCS M5x12 (Motor Mounting) - 91292A125
- SHCS M5x20
- SHCS M5x30 (Rails Mounting) - 91292A192
- Washers M5 - 93475A240
- Set Screws M3x6 (Pinion Safety) - 92605A100
## Material
- Rails / Structure etc: 3/8" x 24x36" of HDPE or ABS (TBD)
- Glide Blocks: 3/8" x 12x24" Acetal (Delrin) Sheet
- Pinions: 1" x 2x6" Acetal (Delrin) Bar
## Tooling
- 1/8" O-Cutter Upcut
- 1/4" O-Cutter Upcut
- 1/2" 90deg Chamfer Endmill
- 1/16" 2-Flute Endmill w/ at least 5mm DOC
## End Effector Showdown
- A Router
- For you, for machine week, roll BLDC controller and do spindle-on-pulley on ER20 ? :o
- Or do full out ATC
- A Laser Diode (haute)
- A 3D Print Head (also haute)
- Heated Bed
- Heated Bed ?
## You need to order
- Motors
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment