Commit e37ac0a0 authored by Jake Read's avatar Jake Read

ongoing

parent 1a1098be
......@@ -25,12 +25,14 @@ In minutia is mayhem
- One and two
## Configuring TinyG
- https://github.com/synthetos/TinyG/wiki
- Steps / mm
- Acceleration
- Travel, etc
## Talking to, loading firmware on, TinyG
- Arduino, I hope?
- Chilipeppr (rad alert!)
## Gcode Basics
- may it RIP
\ No newline at end of file
## Controller
- [TinyG](https://github.com/synthetos/TinyG/wiki)
- [buy on Adafruit](https://www.adafruit.com/product/1749)
## Power Supply
- [24v 14.6A switching PSU](https://www.omc-stepperonline.com/power-supply/350w-24v-146a-115230v-switching-power-supply-stepper-motor-cnc-router-kits-s-350-24.html)
## Motors
- [Y Motors: 2x NEMA 23 57x57x56 w/ 6.32mm Shaft w/ D](https://www.omc-stepperonline.com/hybrid-stepper-motor/nema-23-bipolar-18deg-116nm-1643ozin-15a-54v-57x57x56mm-4-wires-23hs22-1504s.html?mfp=22-shaft-diameter-mm%5B6.35%5D)
- [X Motor: 1x NEMA 23 57x57x52 w/ 6.35mm Shaft w/ D](https://www.omc-stepperonline.com/hybrid-stepper-motor/nema-23-bipolar-18deg-09-nm-1275ozin-2a-36v-57x57x52mm-4-wires-23hs20-2004s.html)
- [Z Motor: 1x NEMA 23 57x57x41 w/ 6.35mm Shaft w/ D](https://www.omc-stepperonline.com/hybrid-stepper-motor/nema-23-bipolar-18deg-06nm-85ozin-088a-66v-57x57x41mm-4-wires-23hs16-0884s.html)
## End Effector Showdown
- A Router
- For you, for machine week, roll BLDC controller and do spindle-on-pulley on ER20 ? :o
- Or do full out ATC
- A Laser Diode (haute)
- A 3D Print Head (also haute)
- Heated Bed
\ No newline at end of file
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment