Update README.md

README.md

@@ -38,6 +38,49 @@ Due to air flow, the user could inhale wood pulp fibers, we are adding wood pulp
 FDM 3D printed masks are slow to produce and have a porosity bigger than >0.1um, we are looking to develop the plastic parts of the mask through injection molding. 
 
 
+## Current Development
+
+<img src="images/l1_0.jpg"  width="400" >
+
+### Raw Material
+
+Celulose comes in letter size sheets, 21.59 cm. X 27.94 cm with a thikness of 1mm.
+
+<img src="images/l2_1.jpg"  width="200" >
+<img src="images/l2_0.jpg"  width="200" >
+
+
+We are also working with wood pulp based fabrics, that will act as filter of big size wood pulp fibers than could be detached from the filter due to air flow: 
+
+<img src="images/l2_2.jpg"  width="400" >
+
+### Fabricating the filter
+
+Due to the density of the celulose raw material, we smashed it and compact into a breathable filter. 
+
+<img src="images/l1_2.jpg"  width="400" >
+
+### Assembling the mask
+
+We are working with the face mask design by [Wasp](https://www.3dwasp.com/en/3d-printed-mask-from-3d-scanning/)
+
+<img src="images/l3_1.jpg"  width="400" >
+
+When everything is already manufactured
+
+<img src="images/l1_1.jpg"  width="400" >
+
+We assemble the parts: 
+
+<img src="images/l3_2.jpg"  width="400" >
+
+And get a finished face mask with a replaceable wood pulp based filter
+
+<img src="images/l1_3.jpg"  width="400" >
+
+
+
+