Commit ba5e557b authored by Neil Gershenfeld's avatar Neil Gershenfeld

wip

parent b634483e
......@@ -4,14 +4,11 @@ shopcam server
can use Ubuntu MATE on a Raspberry Pi 3 with an HD Webcam
sudo apt-get update
sudo apt-get dist-upgrade
sudo apt-get install gedit chromium-browser git npm nodejs-legacy guvcview ristretto tightvncserver xtightvncviewer openssh-server
sudo apt-get install gedit chromium-browser git ristretto tightvncserver openssh-server motion
sudo systemctl enable ssh
System -> Administration -> Time and Date -> Keep synchronized with internet servers
sudo update-manager -> turn off automatic updates
install local web server:
sudo npm install -g http-server-with-auth
clone repos:
git clone https://gitlab.cba.mit.edu/pub/cams.git
git clone https://github.com/novnc/noVNC.git
......@@ -29,8 +26,6 @@ set VNC password:
configure VNC:
cp /home/fab/cams/xstartup /home/fab/.vnc/
gedit /home/fab/.vnc/xstartup
set the local Web server username and password
can use https certificates
configure noVNC:
......@@ -45,5 +40,11 @@ connect to VNC:
http://your_ip_address:6789/vnc.html
once connected:
set configuration at http://127.0.0.1:8080
view camera at http://127.0.0.1:8081
set configuration at http://127.0.0.1:8080
sample settings:
target_dir: /home/fab/Pictures
ffmpeg_output_movies: off
width: 1280
height: 1024
threshold: 40000
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment