Commit c06d715e authored by Zach Fredin's avatar Zach Fredin
Browse files

doc

parent ec526579
......@@ -11,7 +11,7 @@ The circuit uses an ATtiny412 to control four red LEDs, along with a Microchip M
![bikelight_pcb](img/bikelight_pcb.png)
The circuit is designed to be milled on a single sided chunk of FR1 using a 1/64" end mill. If you use [mods](mods.cba.mit.edu), the three layer *.svg files (holes, outline, and traces) are in the /pcb directory.
The circuit is designed to be milled on a single sided chunk of FR1 using a 1/64" end mill. If you use [mods](mods.cba.mit.edu), the three layer *.svg files (holes, outline, and traces) are in the /pcb directory. After assembling and programming with [pyupdi](https://github.com/mraardvark/pyupdi) and an FTDI cable, I masked off the USB jack and slide switch and sprayed it with a few coats of clear varnish.
![bikelight_pcb_img](img/bikelight_pcb_img.jpg)
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment