Commit 1f0c8239 authored by Sam Calisch's avatar Sam Calisch

Update README.md

parent aeb7bcb3
Pipeline #2941 passed with stage
in 2 seconds
......@@ -44,7 +44,7 @@ Stereo:
## Refinements to first prototypes
I did some more prototyping on this design, using milled 1/16" cotton-phenolic, instead of laser-cut 1/8" plywood. I also cured the membrane onto a thin sheet of carbon with a 0,+60,-60 layup. I also switched to 1/8" (D) x 1/16" (H) magnets, instead of 1/8" (D) x 1/8" (H), because the simulations predicted the force output would be similar.
I did some more prototyping on this design, using milled 1/16" cotton-phenolic, instead of laser-cut 1/8" plywood. I also cured the membrane onto a thin sheet of carbon with a 0,+60,-60 layup. I also switched to 1/8" (D) x 1/16" (H) magnets, instead of 1/8" (D) x 1/8" (H), because the simulations predicted the force output would be similar. The total stack is about 4mm thick. :)
<img src= "img/phenolic-magnets.jpg" height=300px>
<img src= "img/phenolic-carbon.jpg" height=300px>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment