Commit b65f94c3 authored by Erik Strand's avatar Erik Strand
Browse files

Add partially complete wildcard page

parent 240b28cc
title = "Wildcard"
date = "2018-12-05"
menu = "main"
weight = 16
Files: [audio_interface_2.sch](/designs/13_audio_interface_2.sch) [audio_interface_2.brd](/designs/13_audio_interface_2.brd) [lufa]( (see Demos/Devices/ClassDriver/MIDI and Demos/Devices/ClassDriver/AudioInput)
This week there's a lot on the menu: soft robotics, bioprinting, coil plotting, wire EDM, and many more. I'd like to learn them all, but for now I'll continue my exploration of [LUFA]( So far I have a virtual serial port example working, but let's see what else I can do. Throughout I'll be using the board that I designed and fabricated [last week](../13_networking).
In [outputs week](../10_output_devices) I taught an ATtiny44 to speak MIDI, albeit not perfectly. Now I can try on an XMEGA. I should also be able to ditch the FTDI cable and [special software](, since everything should work over USB using standard device drivers.
Luckily LUFA has a MIDI device example. To make it work with my board I followed the same steps I previously used for the [virtual serial port](../13_networking) example.
When I plug it in, it shows up as "LUFA MIDI Demo" in Apple's system MIDI configuration utility.
It's also recognized by [Logic Pro]( and [Ableton Live]( So I can use it to control software instruments in all my usual environments. I definitely won't be using the FTDI cable for MIDI anymore.
## Audio
This is what I'm ultimately after for my final project, but it's going to be a lot trickier. LUFA's AudioInput example isn't configured to support XMEGAs, so I either have to redo my board with a different microcontroller, or dive deep into LUFA and add the missing functionality for XMEGAs. The former is a bounded problem, but the latter is a lot more educational. So down the rabbit hole I go...
To begin I cleared out the LUFA LED, Button, and ADC code since they're either not defined for XMEGAs or not something I want to use. When building I still immediately get an error that XMEGA is not a supported architecture. I fixed this by editing `Config/LUFAConfig.h`. I took the following values from the MIDI example's config file.
{{< highlight c >}}
#if (ARCH == ARCH_AVR8)
// ... existing AVR config code here ...
#elif (ARCH == ARCH_XMEGA)
{{< /highlight >}}
Now the compiler complains about invalid registers. Progress! To fix this I need to figure out what the registers they use do on smaller AVR boards, then implement the same thing for XMEGA.
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment