Newer
Older
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \dir Common
* \brief Common library header files.
*
* This folder contains header files which are common to all parts of the LUFA library. They may be used freely in
* user applications.
*
* \dir MemoryAllocator
* \brief Auto-defragmenting dynamic memory allocation library.
*
* This folder contains a simple handle-based dynamic memory allocation library, capable of handing out memory in
* block chunks. As new memory is allocated, the library will defragment the already allocated memory to ensure
* optimal memory usage. It is not used within the LUFA library, and is provided as a convenience for user applications.
*
* \dir Scheduler
* \brief Simple round-robbin scheduler.
*
* This folder contains the simple LUFA round-robbin scheduler, provided as a convenience for user applications. It
* is very simple in design, and is intended to make code easier to read, rather than providing a complete RTOS kernel.
*
* \dir Drivers
* \brief Library hardware and software drivers.
*
* This folder contains all the library hardware and software drivers for each supported board and USB AVR
* microcontroller model.
*
* \dir Drivers/Misc
* \brief Miscellaneous driver files.
*
* This folder contains drivers for aspects other than the USB interface, board hardware or AVR peripherals.
*
Dean Camera
committed
* \dir Drivers/Peripheral
* \brief USB AVR peripheral driver files.
*
* This folder contains drivers for several of the AVR internal peripherals such as the USART, compatible with
* all USB AVR models.
*
Dean Camera
committed
* \dir Drivers/Peripheral/AT90USBXXX67
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
* \brief AT90USBXXX6, AT90USBXXX7 and ATMEGAXXU4 AVR model peripheral driver files. Its original name is due to legacy
* reasons.
*
* This folder contains drivers for several of the AVR internal peripherals such as the USART, compatible only with
* the AT90USBXXX6, AT90USBXXX7 and ATMEGAXXU4 USB AVR models, such as the AT90USB1287. Its contents should <b>not</b> be
* included by the user application - the dispatch header file located in the parent AT90USBXXX directory should be used
* instead.
*
* \dir Drivers/USB
* \brief USB controller peripheral driver files.
*
* This folder contains the main header files required to implement the USB interface in the USB supporting AVR models.
* The header files contained directly in this folder should be included in the user application in order to gain USB
* functionality, and the appropriate C source files in the LowLevel and HighLevel driver folders added to the compile
* and link stages.
*
* \dir Drivers/USB/LowLevel
* \brief Low level USB driver files.
*
* This folder contains low level USB driver source files required to implement USB functionality on the USB AVR microcontrollers.
*
* \dir Drivers/USB/HighLevel
* \brief High level USB driver files.
*
* This folder contains high level USB driver source files required to implement USB functionality on the USB AVR microcontrollers.
*
* \dir Drivers/USB/Class
* \brief USB Class helper driver files.
*
* This folder contains drivers for implementing functionality of standardized USB classes. These are not used directly by the library,
* but provide a standard and library-maintained way of implementing functionality from some of the defined USB classes without extensive
* development effort. Is is recommended that these drivers be used where possible to reduce maintenance of user applications.
*
* \dir Drivers/Board
* \brief Board hardware driver files.
*
* This folder contains drivers for interfacing with the physical hardware on supported commercial boards, primarily from
* the Atmel corporation. Header files in this folder should be included in user applications requiring the functionality of
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
* hardware placed on supported boards.
*
* \dir Drivers/Board/USBKEY
* \brief USBKEY board hardware driver files.
*
* This folder contains drivers for hardware on the Atmel USBKEY demonstration board. The header files in this folder should
* not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory
* should be included instead.
*
* \dir Drivers/Board/STK526
* \brief STK526 board hardware driver files.
*
* This folder contains drivers for hardware on the Atmel STK526 development board. The header files in this folder should
* not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory
* should be included instead.
*
* \dir Drivers/Board/STK525
* \brief STK525 board hardware driver files.
*
* This folder contains drivers for hardware on the Atmel STK525 development board. The header files in this folder should
* not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory
* should be included instead.
*
* \dir Drivers/Board/RZUSBSTICK
* \brief RZUSBSTICK board hardware driver files.
*
* This folder contains drivers for hardware on the Atmel RZUSBSTICK board, as used in the Atmel "Raven" wireless kits. The header
* files in this folder should not be included directly in user applications; the similarly named dispatch header files located in
* the parent Board directory should be included instead.
*
Dean Camera
committed
* \dir Drivers/Board/ATAVRUSBRF01
* \brief ATAVRUSBRF01 board hardware driver files.
*
* This folder contains drivers for hardware on the Atmel ATAVRUSBRF01 board, as used in several Atmel wireless demo kits. The header
* files in this folder should not be included directly in user applications; the similarly named dispatch header files located in
* the parent Board directory should be included instead.
*
* \dir DriverStubs
* \brief Driver stub header files for custom boards, to allow the LUFA board drivers to operate.
*
* This contains stub files for the LUFA board drivers. If the LUFA board drivers are used with board hardware other than those
* directly supported by the library, the BOARD parameter of the application's makefile can be set to "USER", and these stub files
* copied to the "/Board/" directory of the application's folder. When fleshed out with working driver code for the custom board,
* the corresponding LUFA board APIs will work correctly with the non-standard board hardware.
*/