Select Git revision
Host.c 8.65 KiB
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
#include "../HighLevel/USBMode.h"
#if defined(USB_CAN_BE_HOST)
#define INCLUDE_FROM_HOST_C
#include "Host.h"
void USB_Host_ProcessNextHostState(void)
{
uint8_t ErrorCode = HOST_ENUMERROR_NoError;
uint8_t SubErrorCode = HOST_ENUMERROR_NoError;
static uint16_t WaitMSRemaining;
static uint8_t PostWaitState;
switch (USB_HostState)
{
case HOST_STATE_WaitForDevice:
if (WaitMSRemaining)
{
if ((SubErrorCode = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)
{
USB_HostState = PostWaitState;
ErrorCode = HOST_ENUMERROR_WaitStage;
break;
}
if (!(--WaitMSRemaining))
USB_HostState = PostWaitState;
}
break;
case HOST_STATE_Powered:
WaitMSRemaining = HOST_DEVICE_SETTLE_DELAY_MS;
USB_HostState = HOST_STATE_Powered_WaitForDeviceSettle;
break;
case HOST_STATE_Powered_WaitForDeviceSettle:
#if HOST_DEVICE_SETTLE_DELAY_MS > 0
_delay_ms(1);
if (!(WaitMSRemaining--))
{
USB_Host_VBUS_Manual_Off();
USB_OTGPAD_On();
USB_Host_VBUS_Auto_Enable();
USB_Host_VBUS_Auto_On();
USB_HostState = HOST_STATE_Powered_WaitForConnect;
}
#else
USB_HostState = HOST_STATE_Powered_WaitForConnect;
#endif
break;
case HOST_STATE_Powered_WaitForConnect:
if (USB_INT_HasOccurred(USB_INT_DCONNI))
{
USB_INT_Clear(USB_INT_DCONNI);
USB_INT_Clear(USB_INT_DDISCI);
USB_INT_Clear(USB_INT_VBERRI);
USB_INT_Enable(USB_INT_VBERRI);
EVENT_USB_Connect();
USB_Host_ResumeBus();
Pipe_ClearPipes();
HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Powered_DoReset);
}
break;
case HOST_STATE_Powered_DoReset:
USB_Host_ResetDevice();
HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Powered_ConfigPipe);
break;
case HOST_STATE_Powered_ConfigPipe:
Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL,
PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP,
PIPE_CONTROLPIPE_DEFAULT_SIZE, PIPE_BANK_SINGLE);
if (!(Pipe_IsConfigured()))
{
ErrorCode = HOST_ENUMERROR_PipeConfigError;
SubErrorCode = 0;
break;
}
USB_HostState = HOST_STATE_Default;
break;
case HOST_STATE_Default:
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_GetDescriptor,
.wValue = (DTYPE_Device << 8),
.wIndex = 0,
.wLength = 8,
};
uint8_t DataBuffer[8];
if ((SubErrorCode = USB_Host_SendControlRequest(DataBuffer)) != HOST_SENDCONTROL_Successful)
{
ErrorCode = HOST_ENUMERROR_ControlError;
break;
}
#if defined(USE_NONSTANDARD_DESCRIPTOR_NAMES)
USB_ControlPipeSize = DataBuffer[offsetof(USB_Descriptor_Device_t, Endpoint0Size)];
#else
USB_ControlPipeSize = DataBuffer[offsetof(USB_Descriptor_Device_t, bMaxPacketSize0)];
#endif
USB_Host_ResetDevice();
HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Default_PostReset);
break;
case HOST_STATE_Default_PostReset:
Pipe_DisablePipe();
Pipe_DeallocateMemory();
Pipe_ResetPipe(PIPE_CONTROLPIPE);
Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL,
PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP,
USB_ControlPipeSize, PIPE_BANK_SINGLE);
if (!(Pipe_IsConfigured()))
{
ErrorCode = HOST_ENUMERROR_PipeConfigError;
SubErrorCode = 0;
break;
}
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetAddress,
.wValue = USB_HOST_DEVICEADDRESS,
.wIndex = 0,
.wLength = 0,
};
if ((SubErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
ErrorCode = HOST_ENUMERROR_ControlError;
break;
}
HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Default_PostAddressSet);
break;
case HOST_STATE_Default_PostAddressSet:
USB_Host_SetDeviceAddress(USB_HOST_DEVICEADDRESS);
EVENT_USB_DeviceEnumerationComplete();
USB_HostState = HOST_STATE_Addressed;
break;
}
if ((ErrorCode != HOST_ENUMERROR_NoError) && (USB_HostState != HOST_STATE_Unattached))
{
EVENT_USB_DeviceEnumerationFailed(ErrorCode, SubErrorCode);
USB_Host_VBUS_Auto_Off();
EVENT_USB_DeviceUnattached();
EVENT_USB_Disconnect();
USB_ResetInterface();
}
}
uint8_t USB_Host_WaitMS(uint8_t MS)
{
bool BusSuspended = USB_Host_IsBusSuspended();
uint8_t ErrorCode = HOST_WAITERROR_Successful;
USB_Host_ResumeBus();
while (MS)
{
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_HSOFI);
MS--;
}
if ((USB_HostState == HOST_STATE_Unattached) || (USB_CurrentMode == USB_MODE_DEVICE))
{
ErrorCode = HOST_WAITERROR_DeviceDisconnect;
break;
}
if (Pipe_IsError() == true)
{
Pipe_ClearError();
ErrorCode = HOST_WAITERROR_PipeError;
break;
}
if (Pipe_IsStalled() == true)
{
Pipe_ClearStall();
ErrorCode = HOST_WAITERROR_SetupStalled;
break;
}
}
if (BusSuspended)
USB_Host_SuspendBus();
return ErrorCode;
}
static void USB_Host_ResetDevice(void)
{
bool BusSuspended = USB_Host_IsBusSuspended();
USB_INT_Disable(USB_INT_DDISCI);
USB_Host_ResetBus();
while (!(USB_Host_IsBusResetComplete()));
USB_Host_ResumeBus();
USB_INT_Clear(USB_INT_HSOFI);
for (uint8_t MSRem = 10; MSRem != 0; MSRem--)
{
/* Workaround for powerless-pull-up devices. After a USB bus reset,
all disconnection interrupts are suppressed while a USB frame is
looked for - if it is found within 10ms, the device is still
present. */
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_HSOFI);
USB_INT_Clear(USB_INT_DDISCI);
break;
}
_delay_ms(1);
}
if (BusSuspended)
USB_Host_SuspendBus();
USB_INT_Enable(USB_INT_DDISCI);
}
uint8_t USB_Host_SetDeviceConfiguration(const uint8_t ConfigNumber)
{
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetConfiguration,
.wValue = ConfigNumber,
.wIndex = 0,
.wLength = 0,
};
Pipe_SelectPipe(PIPE_CONTROLPIPE);
return USB_Host_SendControlRequest(NULL);
}
uint8_t USB_Host_GetDeviceDescriptor(void* const DeviceDescriptorPtr)
{
USB_ControlRequest = (USB_Request_Header_t)
{
bmRequestType: (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
bRequest: REQ_GetDescriptor,
wValue: (DTYPE_Device << 8),
wIndex: 0,
wLength: sizeof(USB_Descriptor_Device_t),
};
Pipe_SelectPipe(PIPE_CONTROLPIPE);
return USB_Host_SendControlRequest(DeviceDescriptorPtr);
}
uint8_t USB_Host_ClearPipeStall(uint8_t EndpointNum)
{
if (Pipe_GetPipeToken() == PIPE_TOKEN_IN)
EndpointNum |= (1 << 7);
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT),
.bRequest = REQ_ClearFeature,
.wValue = FEATURE_ENDPOINT_HALT,
.wIndex = EndpointNum,
.wLength = 0,
};
Pipe_SelectPipe(PIPE_CONTROLPIPE);
return USB_Host_SendControlRequest(NULL);
}
#endif