Skip to content
Snippets Groups Projects
Select Git revision
  • master default protected
  • LUFA-170418
  • LUFA-151115
  • LUFA-140928
  • LUFA-140302
  • LUFA-130901
  • LUFA-130901-BETA
  • LUFA-130303
  • LUFA-120730
  • LUFA-120730-BETA
  • LUFA-120219
  • LUFA-120219-BETA
  • LUFA-111009
  • LUFA-111009-BETA
  • LUFA-110528
  • LUFA-110528-BETA
16 results

BootloaderCDC.txt

Blame
  • BootloaderCDC.txt 2.31 KiB
    /** \file
     *
     *  This file contains special DoxyGen information for the generation of the main page and other special
     *  documentation pages. It is not a project source file.
     */
     
    /** \mainpage CDC Class USB AVR Bootloader
     *
     *  \section SSec_Compat Demo Compatibility:
     *
     *  The following list indicates what microcontrollers are compatible with this demo.
     *
     *  - Series 7 USB AVRs
     *  - Series 6 USB AVRs
     *  - Series 4 USB AVRs
     *  - Series 2 USB AVRs
     *
     *  \section SSec_Info USB Information:
     *
     *  The following table gives a rundown of the USB utilization of this demo.
     *
     *  <table>
     *   <tr>
     *    <td><b>USB Mode:</b></td>
     *    <td>Device</td>
     *   </tr>
     *   <tr>
     *    <td><b>USB Class:</b></td>
     *    <td>Communications Device Class (CDC)</td>
     *   </tr>
     *   <tr> 
     *    <td><b>USB Subclass:</b></td>
     *    <td>Abstract Control Model (ACM)</td>
     *   </tr>
     *   <tr>
     *    <td><b>Relevant Standards:</b></td>
     *    <td>USBIF CDC Class Standard</td>
     *   </tr>
     *   <tr>
     *    <td><b>Usable Speeds:</b></td>
     *    <td>Full Speed Mode</td>
     *   </tr>
     *  </table>
     *
     *  \section SSec_Description Project Description: 
     *
     *  This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109
     *  protocol compatible programming software to load firmware onto the AVR.	
     *  
     *  Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If
     *  you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU
     *  values in the accompanying makefile.
     *  
     *  This bootloader is compatible with the open source application AVRDUDE, or Atmel's AVRPROG.
     *
     *  After running this bootloader for the first time on a new computer, you will need to supply the .INF
     *  file located in this bootloader project's directory as the device's driver when running under Windows.
     *  This will enable Windows to use its inbuilt CDC drivers, negating the need for custom drivers for the
     *  device. Other Operating Systems should automatically use their own inbuilt CDC-ACM drivers.
     *
     *  \section SSec_Options Project Options
     *
     *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
     *
     *  <table>
     *   <tr>
     *    <td>
     *     None
     *    </td>
     *   </tr>
     *  </table>
     */