Commit 016a4c06 authored by Dean Camera's avatar Dean Camera
Browse files

Make loops in AVRISP-MKII Clone project's XPROG protocol infinite rather than...

Make loops in AVRISP-MKII Clone project's XPROG protocol infinite rather than looping on the timeout value, as this is already checked inside the loop anyway.
parent 26afe5fe
......@@ -77,7 +77,7 @@ static void TINYNVM_SendWriteNVMRegister(const uint8_t Address)
bool TINYNVM_WaitWhileNVMBusBusy(void)
{
/* Poll the STATUS register to check to see if NVM access has been enabled */
while (TimeoutMSRemaining)
for (;;)
{
/* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */
XPROGTarget_SendByte(TPI_CMD_SLDCS | TPI_STATUS_REG);
......@@ -95,8 +95,6 @@ bool TINYNVM_WaitWhileNVMBusBusy(void)
return true;
}
}
return false;
}
/** Waits while the target's NVM controller is busy performing an operation, exiting if the
......@@ -107,7 +105,7 @@ bool TINYNVM_WaitWhileNVMBusBusy(void)
bool TINYNVM_WaitWhileNVMControllerBusy(void)
{
/* Poll the STATUS register to check to see if NVM access has been enabled */
while (TimeoutMSRemaining)
for (;;)
{
/* Send the SIN command to read the TPI STATUS register to see the NVM bus is busy */
TINYNVM_SendReadNVMRegister(XPROG_Param_NVMCSRRegAddr);
......@@ -125,8 +123,6 @@ bool TINYNVM_WaitWhileNVMControllerBusy(void)
return true;
}
}
return false;
}
/** Reads memory from the target's memory spaces.
......
......@@ -72,7 +72,7 @@ static void XMEGANVM_SendNVMRegAddress(const uint8_t Register)
bool XMEGANVM_WaitWhileNVMBusBusy(void)
{
/* Poll the STATUS register to check to see if NVM access has been enabled */
while (TimeoutMSRemaining)
for (;;)
{
/* Send the LDCS command to read the PDI STATUS register to see the NVM bus is active */
XPROGTarget_SendByte(PDI_CMD_LDCS | PDI_STATUS_REG);
......@@ -90,8 +90,6 @@ bool XMEGANVM_WaitWhileNVMBusBusy(void)
return true;
}
}
return false;
}
/** Waits while the target's NVM controller is busy performing an operation, exiting if the
......@@ -102,7 +100,7 @@ bool XMEGANVM_WaitWhileNVMBusBusy(void)
bool XMEGANVM_WaitWhileNVMControllerBusy(void)
{
/* Poll the NVM STATUS register while the NVM controller is busy */
while (TimeoutMSRemaining)
for (;;)
{
/* Send a LDS command to read the NVM STATUS register to check the BUSY flag */
XPROGTarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
......@@ -121,8 +119,6 @@ bool XMEGANVM_WaitWhileNVMControllerBusy(void)
return true;
}
}
return false;
}
/** Retrieves the CRC value of the given memory space.
......
......@@ -192,8 +192,6 @@ static void XPROGTarget_SetTxMode(void)
UCSR1B &= ~(1 << RXEN1);
UCSR1B |= (1 << TXEN1);
IsSending = true;
if (TimeoutMSRemaining)
TimeoutMSRemaining = COMMAND_TIMEOUT_MS;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment