Minor code cleanups for clarity.

Bootloaders/DFU/Descriptors.c

@@ -108,7 +108,7 @@ USB_Descriptor_Configuration_t ConfigurationDescriptor =
 			
 			.Attributes             = (ATTR_CAN_UPLOAD | ATTR_CAN_DOWNLOAD),
 
-			.DetachTimeout         = 0x0000,
+			.DetachTimeout          = 0x0000,
 			.TransferSize           = 0x0c00,
 		
 			.DFUSpecification       = VERSION_BCD(01.01)

Bootloaders/TeensyHID/TeensyHID.c

@@ -41,7 +41,6 @@
  */
 bool RunBootloader = true;
 
-
 /** Main program entry point. This routine configures the hardware required by the bootloader, then continuously 
  *  runs the bootloader processing routine until instructed to soft-exit.
  */
@@ -105,7 +104,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
 			{
 				Endpoint_ClearSETUP();
 				
-				/* Wait until the command (report) has been sent by the host */
+				/* Wait until the command has been sent by the host */
 				while (!(Endpoint_IsOUTReceived()));
 			
 				/* Read in the write destination address */
@@ -123,7 +122,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
 					boot_spm_busy_wait();
 					
 					/* Write each of the FLASH page's bytes in sequence */
-					for (uint8_t PageByte = 0; PageByte < 128; PageByte += 2)
+					for (uint8_t PageByte = 0; PageByte < SPM_PAGESIZE; PageByte += 2)
 					{
 						/* Check if endpoint is empty - if so clear it and wait until ready for next packet */
 						if (!(Endpoint_BytesInEndpoint()))

Demos/Device/ClassDriver/CDC/CDC.c

@@ -130,10 +130,10 @@ void CheckJoystickMovement(void)
 	{
 		ActionSent = true;
 
-		// Write the string to the virtual COM port via the created character stream
+		/* Write the string to the virtual COM port via the created character stream */
 		fputs(ReportString, &USBSerialStream);
 
-		// Alternatively, without the stream:
+		/* Alternatively, without the stream: */
 		// CDC_Device_SendString(&VirtualSerial_CDC_Interface, ReportString, strlen(ReportString));
 	}
 }

Demos/Device/Incomplete/Sideshow/Sideshow.c

@@ -32,8 +32,8 @@
 	SideShow Class demonstration application. This give a reference
 	for implementing Microsoft SideShow compatible devices in an
 	embedded environment. SideShow allows for gadget data displayed
-	on a Vista machine to also be displayed on an externally connected
-	interactive display. Upon enumeration on a Vista system, this will
+	on a Windows Vista or later machine to also be displayed on an
+	externally connected interactive display. Upon enumeration, this will
 	appear as a new SideShow device which can have gadgets loaded onto
 	it.
 	

LUFA/Drivers/Peripheral/SerialStream.c

@@ -28,18 +28,19 @@
   this software.
 */
 
+#define  INCLUDE_FROM_SERIALSTREAM_C
 #include "SerialStream.h"
 
 FILE USARTStream = FDEV_SETUP_STREAM(SerialStream_TxByte, SerialStream_RxByte, _FDEV_SETUP_RW);
 
-int SerialStream_TxByte(char DataByte, FILE *Stream)
+static int SerialStream_TxByte(char DataByte, FILE *Stream)
 {
 	Serial_TxByte(DataByte);
 
 	return 0;
 }
 
-int SerialStream_RxByte(FILE *Stream)
+static int SerialStream_RxByte(FILE *Stream)
 {
 	return Serial_RxByte();
 }

LUFA/Drivers/Peripheral/SerialStream.h

@@ -70,8 +70,10 @@
 			extern FILE USARTStream;
 
 		/* Function Prototypes: */
-			int SerialStream_TxByte(char DataByte, FILE *Stream) ATTR_NON_NULL_PTR_ARG(2);
-			int SerialStream_RxByte(FILE *Stream) ATTR_NON_NULL_PTR_ARG(1);
+		#if defined(INCLUDE_FROM_SERIALSTREAM_C)
+			static int SerialStream_TxByte(char DataByte, FILE *Stream) ATTR_NON_NULL_PTR_ARG(2);
+			static int SerialStream_RxByte(FILE *Stream) ATTR_NON_NULL_PTR_ARG(1);
+		#endif
 	#endif
 
 	/* Public Interface - May be used in end-application: */

LUFA/Drivers/USB/LowLevel/DevChapter9.c

@@ -129,11 +129,11 @@ static void USB_Device_SetAddress(void)
 		  return;
 	}
 
-	UDADDR = ((1 << ADDEN) | DeviceAddress);
-
 	if (DeviceAddress)
 	  USB_DeviceState = DEVICE_STATE_Addressed;
 
+	UDADDR = ((1 << ADDEN) | DeviceAddress);
+
 	return;
 }
 
@@ -192,10 +192,7 @@ static void USB_Device_SetConfiguration(void)
 
 	Endpoint_ClearStatusStage();
 
-	if (USB_ConfigurationNumber)
-	  USB_DeviceState = DEVICE_STATE_Configured;
-	else
-	  USB_DeviceState = DEVICE_STATE_Addressed;
+	USB_DeviceState = (USB_ConfigurationNumber) ? DEVICE_STATE_Configured : DEVICE_STATE_Addressed;
 
 	EVENT_USB_Device_ConfigurationChanged();
 }
@@ -225,10 +222,10 @@ static void USB_Device_GetInternalSerialDescriptor(void)
 		int16_t                 UnicodeString[20];
 	} SignatureDescriptor;
 
-	SignatureDescriptor.Header.Size  = sizeof(SignatureDescriptor);
-	SignatureDescriptor.Header.Type  = DTYPE_String;
+	SignatureDescriptor.Header.Type = DTYPE_String;
+	SignatureDescriptor.Header.Size = sizeof(SignatureDescriptor);
 	
-	uint8_t  SigReadAddress = 0x0E;
+	uint8_t SigReadAddress = 0x0E;
 
 	for (uint8_t SerialCharNum = 0; SerialCharNum < 20; SerialCharNum++)
 	{
@@ -358,16 +355,16 @@ static void USB_Device_ClearSetFeature(void)
 
 				if (Endpoint_IsEnabled())
 				{				
-					if (USB_ControlRequest.bRequest == REQ_ClearFeature)
+					if (USB_ControlRequest.bRequest == REQ_SetFeature)
 					{
-						Endpoint_ClearStall();
-						Endpoint_ResetFIFO(EndpointIndex);
-						Endpoint_ResetDataToggle();
+						Endpoint_StallTransaction();
 					}
 					else
 					{
-						Endpoint_StallTransaction();
-					}
+						Endpoint_ClearStall();
+						Endpoint_ResetFIFO(EndpointIndex);
+						Endpoint_ResetDataToggle();
+					}					
 				}
 			}
 			

LUFA/ManPages/ChangeLog.txt

@@ -17,13 +17,13 @@
   *  - Added new Joystick Host ClassDriver and LowLevel demos
   *  - Added new Printer Host mode Class driver
   *  - Added new Printer Host mode ClassDriver demo
-  *  - Added optional support for double banked endpoints in the Device mode Class drivers
-  *  - Added new stream creation function to the CDC Class drivers, to easily make standard streams from CDC Class driver instances
+  *  - Added optional support for double banked endpoints and pipes in the Device and Host mode Class drivers
+  *  - Added new stream creation function to the CDC Class drivers, to easily make standard I/O streams from CDC Class driver instances
   *
   *  <b>Changed:</b>
   *  - Removed mostly useless "TestApp" demo, as it was mainly useful only for checking for sytax errors in the library
   *  - MIDI device demos now receive MIDI events from the host and display note ON messages via the board LEDs
-  *  - Cleanups to the Device mode Mass Storage demo applications' SCSI routines
+  *  - Cleanups to the Device mode Mass Storage demo application SCSI routines
   *  - Changed Audio Class driver sample read/write functions to be inline, to reduce the number of cycles needed to transfer
   *    samples to and from the device (allowing more time for sample processing and output)
   *  - Audio class Device mode demos now work at both 16MHz and 8MHz, rather than just at 8MHz

LUFA/ManPages/DeviceSupport.txt

@@ -29,7 +29,7 @@
  *   - ATAVRUSBRF01
  *   - XPLAIN (AT90USB1287 only)
  *
- *  Currently supported third-party boards:
+ *  Currently supported third-party board (via hardware drivers):
  *   - BUMBLEB (using officially recommended peripheral layout)
  *   - Any Other Custom User Boards (with Board Drivers, \see Page_WritingBoardDrivers)
  */

LUFA/ManPages/FutureChanges.txt

@@ -12,10 +12,10 @@
   *  or post your suggestion as an enhancement request to the project bug tracker.
   *
   *  <b>Targeted for the Next Release (SVN Development Only):</b>
-  *  - Add hub support to match Atmel's stack
-  *  - Add ability to get number of bytes not written with pipe/endpoint write routines after an error
   *
   *  <b>Targeted for Future Releases:</b>
+  *  - Add hub support to match Atmel's stack
+  *  - Add ability to get number of bytes not written with pipe/endpoint write routines after an error
   *  - Add standardized descriptor names to class driver structures
   *  - Remake AVRStudio project files
   *  - Add detailed overviews of how each demo works

LUFA/ManPages/LUFAPoweredProjects.txt

@@ -41,6 +41,7 @@
  *  - Opendous-JTAG, an open source JTAG device: http://code.google.com/p/opendous-jtag/
  *  - Openkubus, an open source hardware-based authentication dongle: http://code.google.com/p/openkubus/
  *  - Orbee, a USB connected RGB Orb for notifications: http://www.franksworkshop.com.au/Electronics/Orbee/Orbee.htm
+ *  - Programmable XBOX controller: http://richard-burke.dyndns.org/wordpress/pan-galactic-gargantuan-gargle-brain-aka-xbox-360-usb-controller/
  *  - Reprap with LUFA, a LUFA powered 3D printer: http://code.google.com/p/at90usb1287-code-for-arduino-and-eclipse/
  *  - SEGA Megadrive/Genesis Development Cartridge: http://www.makestuff.eu/wordpress/?page_id=398
  *  - SEGA Megadrive/Super Nintendo Cartridge Reader: http://www.snega2usb.com