Commit 2b0c9532 authored by Dean Camera's avatar Dean Camera
Browse files

Fix reversed descriptions for the AVR8 USB pad regulator enable/disable masks (thanks to Omar).

parent 04263de4
......@@ -119,14 +119,15 @@
/** \name USB Controller Option Masks */
//@{
/** Regulator disable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad
* regulator should be enabled to regulate the data pin voltages to within the USB standard.
* regulator should be disabled and the AVR's VCC level used for the data pads.
*
* \note See USB AVR data sheet for more information on the internal pad regulator.
*/
#define USB_OPT_REG_DISABLED (1 << 1)
/** Regulator enable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad
* regulator should be disabled and the AVR's VCC level used for the data pads.
* regulator should be enabled to regulate the data pin voltages from the VBUS level down to a level within
* the range allowable by the USB standard.
*
* \note See USB AVR data sheet for more information on the internal pad regulator.
*/
......
......@@ -114,7 +114,7 @@ void USB_Device_ProcessControlRequest(void)
static void USB_Device_SetAddress(void)
{
uint8_t DeviceAddress = (USB_ControlRequest.wValue & 0x7F);
uint8_t DeviceAddress = (USB_ControlRequest.wValue & 0x7F);
uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask();
GlobalInterruptDisable();
......
......@@ -18,7 +18,7 @@
* - Added new Endpoint_Null_Stream() and Pipe_Null_Stream() functions
* - Added new ADC_GET_CHANNEL_MASK() convenience macro
* - Added new HID report item macros (with HID_RI_ prefix) to allow for easy creation and editing of HID report descriptors
* - Added new HID_DESCRIPTOR_MOUSE, HID_DESCRIPTOR_KEYBOARD, HID_DESCRIPTOR_JOYSTICK and HID_DESCRIPTOR_VENDOR macros
* - Added new HID_DESCRIPTOR_MOUSE(), HID_DESCRIPTOR_KEYBOARD(), HID_DESCRIPTOR_JOYSTICK() and HID_DESCRIPTOR_VENDOR() macros
* for easy automatic creation of basic USB HID device reports
* - Added new MAX() and MIN() convenience macros
* - Added new Serial_SendData() function to the Serial driver
......
......@@ -18,6 +18,7 @@
* -# Change makefiles to allow for absolute LUFA location to be used
* -# Re-add interrupt Pipe/Endpoint support
* -# Add makefile includes to reduce boilerplate in user makefiles
* -# Update stream APIs to use DMA transfers on supported architectures
* - Documentation/Support
* -# Add detailed overviews of how each demo works
* -# Add board overviews
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment