Commit 2dabb4e5 authored by Dean Camera's avatar Dean Camera
Browse files

Add the svn:eol-style property onto new files which where missing it to ensure...

Add the svn:eol-style property onto new files which where missing it to ensure uniform line endings.
parent efbedcfa
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* RFCOMM layer module. This module manages the RFCOMM layer of the
* stack, providing virtual serial port channels on top of the lower
* L2CAP layer.
*/
#define INCLUDE_FROM_RFCOMM_C
#include "RFCOMM.h"
/** 8-Bit CRC table used by the FCS field of each RFCOMM encoded frame, sourced from the ETSI TS 101 369 V7.2.0
* specification document, upon which the RFCOMM specification is based.
*/
const uint8_t CRC8_Table[256] PROGMEM =
{
0x00, 0x91, 0xE3, 0x72, 0x07, 0x96, 0xE4, 0x75, 0x0E, 0x9F, 0xED, 0x7C, 0x09, 0x98, 0xEA, 0x7B,
0x1C, 0x8D, 0xFF, 0x6E, 0x1B, 0x8A, 0xF8, 0x69, 0x12, 0x83, 0xF1, 0x60, 0x15, 0x84, 0xF6, 0x67,
0x38, 0xA9, 0xDB, 0x4A, 0x3F, 0xAE, 0xDC, 0x4D, 0x36, 0xA7, 0xD5, 0x44, 0x31, 0xA0, 0xD2, 0x43,
0x24, 0xB5, 0xC7, 0x56, 0x23, 0xB2, 0xC0, 0x51, 0x2A, 0xBB, 0xC9, 0x58, 0x2D, 0xBC, 0xCE, 0x5F,
0x70, 0xE1, 0x93, 0x02, 0x77, 0xE6, 0x94, 0x05, 0x7E, 0xEF, 0x9D, 0x0C, 0x79, 0xE8, 0x9A, 0x0B,
0x6C, 0xFD, 0x8F, 0x1E, 0x6B, 0xFA, 0x88, 0x19, 0x62, 0xF3, 0x81, 0x10, 0x65, 0xF4, 0x86, 0x17,
0x48, 0xD9, 0xAB, 0x3A, 0x4F, 0xDE, 0xAC, 0x3D, 0x46, 0xD7, 0xA5, 0x34, 0x41, 0xD0, 0xA2, 0x33,
0x54, 0xC5, 0xB7, 0x26, 0x53, 0xC2, 0xB0, 0x21, 0x5A, 0xCB, 0xB9, 0x28, 0x5D, 0xCC, 0xBE, 0x2F,
0xE0, 0x71, 0x03, 0x92, 0xE7, 0x76, 0x04, 0x95, 0xEE, 0x7F, 0x0D, 0x9C, 0xE9, 0x78, 0x0A, 0x9B,
0xFC, 0x6D, 0x1F, 0x8E, 0xFB, 0x6A, 0x18, 0x89, 0xF2, 0x63, 0x11, 0x80, 0xF5, 0x64, 0x16, 0x87,
0xD8, 0x49, 0x3B, 0xAA, 0xDF, 0x4E, 0x3C, 0xAD, 0xD6, 0x47, 0x35, 0xA4, 0xD1, 0x40, 0x32, 0xA3,
0xC4, 0x55, 0x27, 0xB6, 0xC3, 0x52, 0x20, 0xB1, 0xCA, 0x5B, 0x29, 0xB8, 0xCD, 0x5C, 0x2E, 0xBF,
0x90, 0x01, 0x73, 0xE2, 0x97, 0x06, 0x74, 0xE5, 0x9E, 0x0F, 0x7D, 0xEC, 0x99, 0x08, 0x7A, 0xEB,
0x8C, 0x1D, 0x6F, 0xFE, 0x8B, 0x1A, 0x68, 0xF9, 0x82, 0x13, 0x61, 0xF0, 0x85, 0x14, 0x66, 0xF7,
0xA8, 0x39, 0x4B, 0xDA, 0xAF, 0x3E, 0x4C, 0xDD, 0xA6, 0x37, 0x45, 0xD4, 0xA1, 0x30, 0x42, 0xD3,
0xB4, 0x25, 0x57, 0xC6, 0xB3, 0x22, 0x50, 0xC1, 0xBA, 0x2B, 0x59, 0xC8, 0xBD, 0x2C, 0x5E, 0xCF
};
/** Initializes the RFCOMM service, ready for new connections from a SDP client. */
void RFCOMM_Initialize(void)
{
/* Not currently used */
}
void RFCOMM_ProcessPacket(void* Data, Bluetooth_Channel_t* const Channel)
{
const RFCOMM_Header_t* FrameHeader = (const RFCOMM_Header_t*)Data;
/* Decode the RFCOMM frame type from the header */
switch (FrameHeader->Control & ~FRAME_POLL_FINAL)
{
case RFCOMM_Frame_SABM:
RFCOMM_ProcessSABM(FrameHeader, Channel);
break;
case RFCOMM_Frame_UA:
RFCOMM_ProcessUA(FrameHeader, Channel);
break;
case RFCOMM_Frame_DM:
RFCOMM_ProcessDM(FrameHeader, Channel);
break;
case RFCOMM_Frame_DISC:
RFCOMM_ProcessDISC(FrameHeader, Channel);
break;
case RFCOMM_Frame_UIH:
RFCOMM_ProcessUIH(FrameHeader, Channel);
break;
default:
BT_RFCOMM_DEBUG(1, "<< Unknown Frame Type");
break;
}
}
static void RFCOMM_ProcessSABM(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel)
{
BT_RFCOMM_DEBUG(1, "<< SABM Received");
BT_RFCOMM_DEBUG(2, "-- Address 0x%02X", FrameHeader->Address);
// TODO: Reset channel send/receive state here
struct
{
RFCOMM_Header_t FrameHeader;
uint8_t FrameLength;
uint8_t FCS;
} ResponsePacket;
/* Copy over the same frame header as the sent packet to copy the logical RFCOMM channel address */
ResponsePacket.FrameHeader.Address = FrameHeader->Address;
/* Set the frame type to an Unnumbered Acknowledgement to acknowledge the SABM request */
ResponsePacket.FrameHeader.Control = RFCOMM_Frame_UA;
/* Set the length to 0 (LSB indicates end of 8-bit length field) */
ResponsePacket.FrameLength = 0x01;
/* Calculate the frame checksum from all fields except the FCS field itself */
ResponsePacket.FCS = RFCOMM_GetFCSValue(&ResponsePacket, sizeof(ResponsePacket) - sizeof(ResponsePacket.FCS));
BT_RFCOMM_DEBUG(1, ">> UA Sent");
/* Send the completed response packet to the sender */
Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), Channel);
}
static void RFCOMM_ProcessUA(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel)
{
const uint8_t* CurrBufferPos = ((const uint8_t*)FrameHeader + sizeof(RFCOMM_Header_t));
BT_RFCOMM_DEBUG(1, "<< UA Received");
BT_RFCOMM_DEBUG(2, "-- Address 0x%02X", FrameHeader->Address);
}
static void RFCOMM_ProcessDM(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel)
{
const uint8_t* CurrBufferPos = ((const uint8_t*)FrameHeader + sizeof(RFCOMM_Header_t));
BT_RFCOMM_DEBUG(1, "<< DM Received");
BT_RFCOMM_DEBUG(2, "-- Address 0x%02X", FrameHeader->Address);
}
static void RFCOMM_ProcessDISC(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel)
{
const uint8_t* CurrBufferPos = ((const uint8_t*)FrameHeader + sizeof(RFCOMM_Header_t));
BT_RFCOMM_DEBUG(1, "<< DISC Received");
BT_RFCOMM_DEBUG(2, "-- Address 0x%02X", FrameHeader->Address);
}
static void RFCOMM_ProcessUIH(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel)
{
const uint8_t* CurrBufferPos = ((const uint8_t*)FrameHeader + sizeof(RFCOMM_Header_t));
BT_RFCOMM_DEBUG(1, "<< UIH Received");
BT_RFCOMM_DEBUG(2, "-- Address 0x%02X", FrameHeader->Address);
}
static uint8_t RFCOMM_GetFCSValue(const void* FrameStart, uint16_t Length)
{
const uint8_t* CurrPos = FrameStart;
uint8_t FCS = 0xFF;
while (Length--)
FCS = pgm_read_byte(CRC8_Table[FCS ^ *(CurrPos++)]);
return ~FCS;
}
static uint16_t RFCOMM_GetFrameDataLength(const uint8_t** BufferPos)
{
uint8_t FirstOctet = *((*BufferPos)++);
uint8_t SecondOctet = 0;
if (!(FirstOctet & 0x01))
SecondOctet = *((*BufferPos)++);
return (((uint16_t)SecondOctet << 7) | (FirstOctet >> 1));
}
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* RFCOMM layer module. This module manages the RFCOMM layer of the
* stack, providing virtual serial port channels on top of the lower
* L2CAP layer.
*/
#define INCLUDE_FROM_RFCOMM_C
#include "RFCOMM.h"
/** 8-Bit CRC table used by the FCS field of each RFCOMM encoded frame, sourced from the ETSI TS 101 369 V7.2.0
* specification document, upon which the RFCOMM specification is based.
*/
const uint8_t CRC8_Table[256] PROGMEM =
{
0x00, 0x91, 0xE3, 0x72, 0x07, 0x96, 0xE4, 0x75, 0x0E, 0x9F, 0xED, 0x7C, 0x09, 0x98, 0xEA, 0x7B,
0x1C, 0x8D, 0xFF, 0x6E, 0x1B, 0x8A, 0xF8, 0x69, 0x12, 0x83, 0xF1, 0x60, 0x15, 0x84, 0xF6, 0x67,
0x38, 0xA9, 0xDB, 0x4A, 0x3F, 0xAE, 0xDC, 0x4D, 0x36, 0xA7, 0xD5, 0x44, 0x31, 0xA0, 0xD2, 0x43,
0x24, 0xB5, 0xC7, 0x56, 0x23, 0xB2, 0xC0, 0x51, 0x2A, 0xBB, 0xC9, 0x58, 0x2D, 0xBC, 0xCE, 0x5F,
0x70, 0xE1, 0x93, 0x02, 0x77, 0xE6, 0x94, 0x05, 0x7E, 0xEF, 0x9D, 0x0C, 0x79, 0xE8, 0x9A, 0x0B,
0x6C, 0xFD, 0x8F, 0x1E, 0x6B, 0xFA, 0x88, 0x19, 0x62, 0xF3, 0x81, 0x10, 0x65, 0xF4, 0x86, 0x17,
0x48, 0xD9, 0xAB, 0x3A, 0x4F, 0xDE, 0xAC, 0x3D, 0x46, 0xD7, 0xA5, 0x34, 0x41, 0xD0, 0xA2, 0x33,
0x54, 0xC5, 0xB7, 0x26, 0x53, 0xC2, 0xB0, 0x21, 0x5A, 0xCB, 0xB9, 0x28, 0x5D, 0xCC, 0xBE, 0x2F,
0xE0, 0x71, 0x03, 0x92, 0xE7, 0x76, 0x04, 0x95, 0xEE, 0x7F, 0x0D, 0x9C, 0xE9, 0x78, 0x0A, 0x9B,
0xFC, 0x6D, 0x1F, 0x8E, 0xFB, 0x6A, 0x18, 0x89, 0xF2, 0x63, 0x11, 0x80, 0xF5, 0x64, 0x16, 0x87,
0xD8, 0x49, 0x3B, 0xAA, 0xDF, 0x4E, 0x3C, 0xAD, 0xD6, 0x47, 0x35, 0xA4, 0xD1, 0x40, 0x32, 0xA3,
0xC4, 0x55, 0x27, 0xB6, 0xC3, 0x52, 0x20, 0xB1, 0xCA, 0x5B, 0x29, 0xB8, 0xCD, 0x5C, 0x2E, 0xBF,
0x90, 0x01, 0x73, 0xE2, 0x97, 0x06, 0x74, 0xE5, 0x9E, 0x0F, 0x7D, 0xEC, 0x99, 0x08, 0x7A, 0xEB,
0x8C, 0x1D, 0x6F, 0xFE, 0x8B, 0x1A, 0x68, 0xF9, 0x82, 0x13, 0x61, 0xF0, 0x85, 0x14, 0x66, 0xF7,
0xA8, 0x39, 0x4B, 0xDA, 0xAF, 0x3E, 0x4C, 0xDD, 0xA6, 0x37, 0x45, 0xD4, 0xA1, 0x30, 0x42, 0xD3,
0xB4, 0x25, 0x57, 0xC6, 0xB3, 0x22, 0x50, 0xC1, 0xBA, 0x2B, 0x59, 0xC8, 0xBD, 0x2C, 0x5E, 0xCF
};
/** Initializes the RFCOMM service, ready for new connections from a SDP client. */
void RFCOMM_Initialize(void)
{
/* Not currently used */
}
void RFCOMM_ProcessPacket(void* Data, Bluetooth_Channel_t* const Channel)
{
const RFCOMM_Header_t* FrameHeader = (const RFCOMM_Header_t*)Data;
/* Decode the RFCOMM frame type from the header */
switch (FrameHeader->Control & ~FRAME_POLL_FINAL)
{
case RFCOMM_Frame_SABM:
RFCOMM_ProcessSABM(FrameHeader, Channel);
break;
case RFCOMM_Frame_UA:
RFCOMM_ProcessUA(FrameHeader, Channel);
break;
case RFCOMM_Frame_DM:
RFCOMM_ProcessDM(FrameHeader, Channel);
break;
case RFCOMM_Frame_DISC:
RFCOMM_ProcessDISC(FrameHeader, Channel);
break;
case RFCOMM_Frame_UIH:
RFCOMM_ProcessUIH(FrameHeader, Channel);
break;
default:
BT_RFCOMM_DEBUG(1, "<< Unknown Frame Type");
break;
}
}
static void RFCOMM_ProcessSABM(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel)
{
BT_RFCOMM_DEBUG(1, "<< SABM Received");
BT_RFCOMM_DEBUG(2, "-- Address 0x%02X", FrameHeader->Address);
// TODO: Reset channel send/receive state here
struct
{
RFCOMM_Header_t FrameHeader;
uint8_t FrameLength;
uint8_t FCS;
} ResponsePacket;
/* Copy over the same frame header as the sent packet to copy the logical RFCOMM channel address */
ResponsePacket.FrameHeader.Address = FrameHeader->Address;
/* Set the frame type to an Unnumbered Acknowledgement to acknowledge the SABM request */
ResponsePacket.FrameHeader.Control = RFCOMM_Frame_UA;
/* Set the length to 0 (LSB indicates end of 8-bit length field) */
ResponsePacket.FrameLength = 0x01;
/* Calculate the frame checksum from all fields except the FCS field itself */
ResponsePacket.FCS = RFCOMM_GetFCSValue(&ResponsePacket, sizeof(ResponsePacket) - sizeof(ResponsePacket.FCS));
BT_RFCOMM_DEBUG(1, ">> UA Sent");
/* Send the completed response packet to the sender */
Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), Channel);
}
static void RFCOMM_ProcessUA(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel)
{
const uint8_t* CurrBufferPos = ((const uint8_t*)FrameHeader + sizeof(RFCOMM_Header_t));
BT_RFCOMM_DEBUG(1, "<< UA Received");
BT_RFCOMM_DEBUG(2, "-- Address 0x%02X", FrameHeader->Address);
}
static void RFCOMM_ProcessDM(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel)
{
const uint8_t* CurrBufferPos = ((const uint8_t*)FrameHeader + sizeof(RFCOMM_Header_t));
BT_RFCOMM_DEBUG(1, "<< DM Received");
BT_RFCOMM_DEBUG(2, "-- Address 0x%02X", FrameHeader->Address);
}
static void RFCOMM_ProcessDISC(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel)
{
const uint8_t* CurrBufferPos = ((const uint8_t*)FrameHeader + sizeof(RFCOMM_Header_t));
BT_RFCOMM_DEBUG(1, "<< DISC Received");
BT_RFCOMM_DEBUG(2, "-- Address 0x%02X", FrameHeader->Address);
}
static void RFCOMM_ProcessUIH(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel)
{
const uint8_t* CurrBufferPos = ((const uint8_t*)FrameHeader + sizeof(RFCOMM_Header_t));
BT_RFCOMM_DEBUG(1, "<< UIH Received");
BT_RFCOMM_DEBUG(2, "-- Address 0x%02X", FrameHeader->Address);
}
static uint8_t RFCOMM_GetFCSValue(const void* FrameStart, uint16_t Length)
{
const uint8_t* CurrPos = FrameStart;
uint8_t FCS = 0xFF;
while (Length--)
FCS = pgm_read_byte(CRC8_Table[FCS ^ *(CurrPos++)]);
return ~FCS;
}
static uint16_t RFCOMM_GetFrameDataLength(const uint8_t** BufferPos)
{
uint8_t FirstOctet = *((*BufferPos)++);
uint8_t SecondOctet = 0;
if (!(FirstOctet & 0x01))
SecondOctet = *((*BufferPos)++);
return (((uint16_t)SecondOctet << 7) | (FirstOctet >> 1));
}
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for RFCOMM.c.
*/
#ifndef _RFCOMM_H_
#define _RFCOMM_H_
/* Includes: */
#include <avr/io.h>
#include <avr/pgmspace.h>
#include <string.h>
#include <stdbool.h>
#include <stdio.h>
#include <LUFA/Common/Common.h>
#include <LUFA/Drivers/Peripheral/SerialStream.h>
#include "BluetoothStack.h"
/* Macros: */
#define BT_RFCOMM_DEBUG(l, s, ...) do { if (RFCOMM_DEBUG_LEVEL >= l) printf_P(PSTR("(RFCOMM) " s "\r\n"), ##__VA_ARGS__); } while (0)
#define RFCOMM_DEBUG_LEVEL 2
#define FRAME_POLL_FINAL (1 << 4)
/* Enums: */
/** Enum for the types of RFCOMM frames which can be exchanged on a Bluetooth channel. */
enum RFCOMM_Frame_Types_t
{
RFCOMM_Frame_SABM = 0x2F, /**< Set Asynchronous Balance Mode Field */
RFCOMM_Frame_UA = 0x63, /**< Unnumbered Acknowledgement Field */
RFCOMM_Frame_DM = 0x0F, /**< Disconnected Mode Field */
RFCOMM_Frame_DISC = 0x43, /**< Disconnect Field */
RFCOMM_Frame_UIH = 0xEF, /**< Unnumbered Information with Header check Field */
};
/* Type Defines: */
typedef struct
{
struct
{
unsigned char LogicalChannel : 6;
unsigned char PollResponse : 1;
unsigned char LastAddressOctet : 1;
} Address;
uint8_t Control;
} RFCOMM_Header_t;
/* Function Prototypes: */
void RFCOMM_Initialize(void);
void RFCOMM_ProcessPacket(void* Data, Bluetooth_Channel_t* const Channel);
#if defined(INCLUDE_FROM_RFCOMM_C)
static void RFCOMM_ProcessSABM(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel);
static void RFCOMM_ProcessUA(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel);
static void RFCOMM_ProcessDM(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel);
static void RFCOMM_ProcessDISC(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel);
static void RFCOMM_ProcessUIH(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel);
static uint8_t RFCOMM_GetFCSValue(const void* FrameStart, uint16_t Length);
static uint16_t RFCOMM_GetFrameDataLength(const uint8_t** BufferPos);
#endif
#endif
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for RFCOMM.c.
*/
#ifndef _RFCOMM_H_
#define _RFCOMM_H_
/* Includes: */
#include <avr/io.h>
#include <avr/pgmspace.h>
#include <string.h>
#include <stdbool.h>
#include <stdio.h>
#include <LUFA/Common/Common.h>
#include <LUFA/Drivers/Peripheral/SerialStream.h>
#include "BluetoothStack.h"
/* Macros: */
#define BT_RFCOMM_DEBUG(l, s, ...) do { if (RFCOMM_DEBUG_LEVEL >= l) printf_P(PSTR("(RFCOMM) " s "\r\n"), ##__VA_ARGS__); } while (0)
#define RFCOMM_DEBUG_LEVEL 2
#define FRAME_POLL_FINAL (1 << 4)
/* Enums: */
/** Enum for the types of RFCOMM frames which can be exchanged on a Bluetooth channel. */
enum RFCOMM_Frame_Types_t
{
RFCOMM_Frame_SABM = 0x2F, /**< Set Asynchronous Balance Mode Field */
RFCOMM_Frame_UA = 0x63, /**< Unnumbered Acknowledgement Field */
RFCOMM_Frame_DM = 0x0F, /**< Disconnected Mode Field */
RFCOMM_Frame_DISC = 0x43, /**< Disconnect Field */
RFCOMM_Frame_UIH = 0xEF, /**< Unnumbered Information with Header check Field */
};
/* Type Defines: */
typedef struct
{
struct
{
unsigned char LogicalChannel : 6;
unsigned char PollResponse : 1;
unsigned char LastAddressOctet : 1;
} Address;
uint8_t Control;
} RFCOMM_Header_t;
/* Function Prototypes: */
void RFCOMM_Initialize(void);
void RFCOMM_ProcessPacket(void* Data, Bluetooth_Channel_t* const Channel);
#if defined(INCLUDE_FROM_RFCOMM_C)
static void RFCOMM_ProcessSABM(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel);
static void RFCOMM_ProcessUA(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel);
static void RFCOMM_ProcessDM(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel);
static void RFCOMM_ProcessDISC(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel);
static void RFCOMM_ProcessUIH(const RFCOMM_Header_t* const FrameHeader, Bluetooth_Channel_t* const Channel);
static uint8_t RFCOMM_GetFCSValue(const void* FrameStart, uint16_t Length);
static uint16_t RFCOMM_GetFrameDataLength(const uint8_t** BufferPos);
#endif
#endif
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of