Add LOAD ADDRESS command parsing to the V2 Protocol hander in the AVRISP project.

Fix up references to functions in the Endpoint/Pipe documentation.

LUFA/Drivers/USB/HighLevel/Events.h

@@ -97,7 +97,7 @@
 			
 			/** Event for USB device attachment. This event fires when a the USB interface is in host mode, and
 			 *  a USB device has been connected to the USB interface. This is interrupt driven, thus fires before
-			 *  the standard \ref EVENT_USB_Device_Connect event and so can be used to programmatically start the USB
+			 *  the standard \ref EVENT_USB_Device_Connect() event and so can be used to programmatically start the USB
 			 *  management task to reduce CPU consumption.
 			 *
 			 *  \note This event only exists on USB AVR models which supports host mode.

LUFA/Drivers/USB/LowLevel/Endpoint.h

@@ -789,7 +789,7 @@
 			 */
 			uint8_t Endpoint_Write_Stream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
 
-			/** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE.
+			/** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE().
 			 *
 			 *  \ingroup Group_EndpointStreamRW
 			 *
@@ -801,7 +801,7 @@
 			 */
 			uint8_t Endpoint_Write_EStream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
 
-			/** FLASH buffer source version of \ref Endpoint_Write_Stream_LE.
+			/** FLASH buffer source version of \ref Endpoint_Write_Stream_LE().
 			 *
 			 *  \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
 			 *
@@ -838,7 +838,7 @@
 			 */
 			uint8_t Endpoint_Write_Stream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
 
-			/** EEPROM buffer source version of \ref Endpoint_Write_Stream_BE.
+			/** EEPROM buffer source version of \ref Endpoint_Write_Stream_BE().
 			 *
 			 *  \ingroup Group_EndpointStreamRW
 			 *
@@ -850,7 +850,7 @@
 			 */
 			uint8_t Endpoint_Write_EStream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
 
-			/** FLASH buffer source version of \ref Endpoint_Write_Stream_BE.
+			/** FLASH buffer source version of \ref Endpoint_Write_Stream_BE().
 			 *
 			 *  \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
 			 *
@@ -887,7 +887,7 @@
 			 */
 			uint8_t Endpoint_Read_Stream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
 
-			/** EEPROM buffer source version of \ref Endpoint_Read_Stream_LE.
+			/** EEPROM buffer source version of \ref Endpoint_Read_Stream_LE().
 			 *
 			 *  \ingroup Group_EndpointStreamRW
 			 *
@@ -922,7 +922,7 @@
 			 */
 			uint8_t Endpoint_Read_Stream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
 
-			/** EEPROM buffer source version of \ref Endpoint_Read_Stream_BE.
+			/** EEPROM buffer source version of \ref Endpoint_Read_Stream_BE().
 			 *
 			 *  \ingroup Group_EndpointStreamRW
 			 *
@@ -975,7 +975,7 @@
 			 */
 			uint8_t Endpoint_Write_Control_EStream_LE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
 
-			/** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_LE.
+			/** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_LE().
 			 *
 			 *  \note This function automatically clears the control transfer's status stage. Do not manually attempt
 			 *        to clear the status stage when using this routine in a control transaction.
@@ -1018,7 +1018,7 @@
 			 */
 			uint8_t Endpoint_Write_Control_Stream_BE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
 
-			/** EEPROM buffer source version of \ref Endpoint_Write_Control_Stream_BE.
+			/** EEPROM buffer source version of \ref Endpoint_Write_Control_Stream_BE().
 			 *
 			 *  \note This function automatically clears the control transfer's status stage. Do not manually attempt
 			 *        to clear the status stage when using this routine in a control transaction.
@@ -1037,7 +1037,7 @@
 			 */
 			uint8_t Endpoint_Write_Control_EStream_BE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
 
-			/** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_BE.
+			/** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_BE().
 			 *
 			 *  \note This function automatically clears the control transfer's status stage. Do not manually attempt
 			 *        to clear the status stage when using this routine in a control transaction.
@@ -1080,7 +1080,7 @@
 			 */
 			uint8_t Endpoint_Read_Control_Stream_LE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
 
-			/** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_LE.
+			/** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_LE().
 			 *
 			 *  \note This function automatically clears the control transfer's status stage. Do not manually attempt
 			 *        to clear the status stage when using this routine in a control transaction.
@@ -1121,7 +1121,7 @@
 			 */
 			uint8_t Endpoint_Read_Control_Stream_BE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);		
 			
-			/** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_BE.
+			/** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_BE().
 			 *
 			 *  \note This function automatically clears the control transfer's status stage. Do not manually attempt
 			 *        to clear the status stage when using this routine in a control transaction.

LUFA/Drivers/USB/LowLevel/Pipe.h

@@ -836,7 +836,7 @@
 			 */
 			uint8_t Pipe_Write_Stream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);				
 
-			/** EEPROM buffer source version of \ref Pipe_Write_Stream_LE.
+			/** EEPROM buffer source version of \ref Pipe_Write_Stream_LE().
 			 *
 			 *  \ingroup Group_PipeStreamRW
 			 *
@@ -848,7 +848,7 @@
 			 */
 			uint8_t Pipe_Write_EStream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
 			
-			/** FLASH buffer source version of \ref Pipe_Write_Stream_LE.
+			/** FLASH buffer source version of \ref Pipe_Write_Stream_LE().
 			 *
 			 *  \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
 			 *
@@ -885,7 +885,7 @@
 			 */
 			uint8_t Pipe_Write_Stream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
 
-			/** EEPROM buffer source version of \ref Pipe_Write_Stream_BE.
+			/** EEPROM buffer source version of \ref Pipe_Write_Stream_BE().
 			 *
 			 *  \ingroup Group_PipeStreamRW
 			 *
@@ -897,7 +897,7 @@
 			 */
 			uint8_t Pipe_Write_EStream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
 			
-			/** FLASH buffer source version of \ref Pipe_Write_Stream_BE.
+			/** FLASH buffer source version of \ref Pipe_Write_Stream_BE().
 			 *
 			 *  \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
 			 *
@@ -926,7 +926,7 @@
 			 *
 			 *  \ingroup Group_PipeStreamRW
 			 *
-			 *  \param[out] Buffer    Pointer to the source data buffer to write to.
+			 *  \param[out] Buffer   Pointer to the source data buffer to write to.
 			 *  \param[in] Length    Number of bytes to read for the currently selected pipe to read from.
 			 *  \param[in] Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback
 			 *
@@ -934,11 +934,11 @@
 			 */
 			uint8_t Pipe_Read_Stream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
 
-			/** EEPROM buffer source version of \ref Pipe_Read_Stream_LE.
+			/** EEPROM buffer source version of \ref Pipe_Read_Stream_LE().
 			 *
 			 *  \ingroup Group_PipeStreamRW
 			 *
-			 *  \param[out] Buffer    Pointer to the source data buffer to write to.
+			 *  \param[out] Buffer   Pointer to the source data buffer to write to.
 			 *  \param[in] Length    Number of bytes to read for the currently selected pipe to read from.
 			 *  \param[in] Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback
 			 *
@@ -961,7 +961,7 @@
 			 *
 			 *  \ingroup Group_PipeStreamRW
 			 *
-			 *  \param[out] Buffer    Pointer to the source data buffer to write to.
+			 *  \param[out] Buffer   Pointer to the source data buffer to write to.
 			 *  \param[in] Length    Number of bytes to read for the currently selected pipe to read from.
 			 *  \param[in] Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback
 			 *
@@ -969,11 +969,11 @@
 			 */
 			uint8_t Pipe_Read_Stream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
 			
-			/** EEPROM buffer source version of \ref Pipe_Read_Stream_BE.
+			/** EEPROM buffer source version of \ref Pipe_Read_Stream_BE().
 			 *
 			 *  \ingroup Group_PipeStreamRW
 			 *
-			 *  \param[out] Buffer    Pointer to the source data buffer to write to.
+			 *  \param[out] Buffer   Pointer to the source data buffer to write to.
 			 *  \param[in] Length    Number of bytes to read for the currently selected pipe to read from.
 			 *  \param[in] Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback
 			 *

Projects/Unfinished/AVRISP/Lib/V2Protocol.c

@@ -36,6 +36,9 @@
 #define  INCLUDE_FROM_V2PROTOCOL_C
 #include "V2Protocol.h"
 
+uint32_t CurrentAddress;
+
+
 /* Table of masks for SPI_Init() from a given PARAM_SCK_DURATION value */
 static const uint8_t SPIMaskFromSCKDuration[MAX_SPI_SETTINGS] =
 	{
@@ -88,6 +91,9 @@ void V2Protocol_ProcessCommand(void)
 		case CMD_GET_PARAMETER:
 			V2Protocol_Command_GetSetParam(V2Command);
 			break;
+		case CMD_LOAD_ADDRESS:
+			V2Protocol_Command_LoadAddress();
+			break;
 		case CMD_SPI_MULTI:
 			V2Protocol_Command_SPIMulti();
 			break;		
@@ -127,6 +133,7 @@ static void V2Protocol_Command_SignOn(void)
 	Endpoint_WaitUntilReady();
 
 	V2Protocol_ReconfigureSPI();
+	CurrentAddress = 0;
 
 	Endpoint_Write_Byte(CMD_SIGN_ON);
 	Endpoint_Write_Byte(STATUS_CMD_OK);
@@ -166,6 +173,19 @@ static void V2Protocol_Command_GetSetParam(uint8_t V2Command)
 	Endpoint_ClearIN();
 }
 
+static void V2Protocol_Command_LoadAddress(void)
+{
+	CurrentAddress = Endpoint_Read_DWord_LE();
+
+	Endpoint_ClearOUT();
+	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+	Endpoint_WaitUntilReady();
+
+	Endpoint_Write_Byte(CMD_LOAD_ADDRESS);
+	Endpoint_Write_Byte(STATUS_CMD_OK);
+	Endpoint_ClearIN();
+}
+
 static void V2Protocol_Command_SPIMulti(void)
 {
 	uint8_t TxBytes     = Endpoint_Read_Byte();

Projects/Unfinished/AVRISP/Lib/V2Protocol.h

@@ -62,6 +62,7 @@
 			static void    V2Protocol_Command_Unknown(uint8_t V2Command);
 			static void    V2Protocol_Command_SignOn(void);
 			static void    V2Protocol_Command_GetSetParam(uint8_t V2Command);
+			static void    V2Protocol_Command_LoadAddress(void);
 			static void    V2Protocol_Command_SPIMulti(void);
 		#endif