Skip to content

GitLab

Commit 328ed71c authored by Dean Camera's avatar Dean Camera
Browse files

Fix spacing of the function parameter descriptions in the Doxygen documentation.

parent c1daecf1
Hide whitespace changes
Inline Side-by-side
LUFA/Common/Common.h
View file @ 328ed71c
......@@ -118,7 +118,7 @@
*
* \ingroup Group_BitManip
*
* \param[in] Byte Byte of data whose bits are to be reversed
* \param[in] Byte Byte of data whose bits are to be reversed
*/
static inline uint8_t BitReverse(uint8_t Byte) ATTR_WARN_UNUSED_RESULT ATTR_CONST;
static inline uint8_t BitReverse(uint8_t Byte)
......@@ -134,7 +134,7 @@
*
* \ingroup Group_BitManip
*
* \param[in] Word Word of data whose bytes are to be swapped
* \param[in] Word Word of data whose bytes are to be swapped
*/
static inline uint16_t SwapEndian_16(uint16_t Word) ATTR_WARN_UNUSED_RESULT ATTR_CONST;
static inline uint16_t SwapEndian_16(uint16_t Word)
......@@ -146,7 +146,7 @@
*
* \ingroup Group_BitManip
*
* \param[in] DWord Double word of data whose bytes are to be swapped
* \param[in] DWord Double word of data whose bytes are to be swapped
*/
static inline uint32_t SwapEndian_32(uint32_t DWord) ATTR_WARN_UNUSED_RESULT ATTR_CONST;
static inline uint32_t SwapEndian_32(uint32_t DWord)
......@@ -161,8 +161,8 @@
*
* \ingroup Group_BitManip
*
* \param[in,out] Data Pointer to a number containing an even number of bytes to be reversed
* \param[in] Bytes Length of the data in bytes
* \param[in,out] Data Pointer to a number containing an even number of bytes to be reversed
* \param[in] Bytes Length of the data in bytes
*/
static inline void SwapEndian_n(void* Data, uint8_t Bytes);
static inline void SwapEndian_n(void* Data, uint8_t Bytes)
......
LUFA/Drivers/Board/LEDs.h
View file @ 328ed71c
......@@ -167,7 +167,7 @@
/** Toggles all LEDs in the LED mask, leaving all others in their current states.
*
* \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
* \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
*/
static inline void LEDs_ToggleLEDs(const uint8_t LEDMask);
......
LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h
View file @ 328ed71c
......@@ -110,7 +110,7 @@
/** Receives a byte from the currently addressed device on the TWI bus.
*
* \param[in] Byte Location where the read byte is to be stored
* \param[in] Byte Location where the read byte is to be stored
* \param[in] LastByte Indicates if the byte should be ACKed if false, NAKed if true
*
* \return Boolean true if the byte reception sucessfully completed, false otherwise
......
LUFA/Drivers/Peripheral/SPI.h
View file @ 328ed71c
......@@ -153,7 +153,7 @@
/** Sends a byte through the SPI interface, blocking until the transfer is complete. The response
* byte sent to from the attached SPI device is ignored.
*
* \param[in] Byte Byte to send through the SPI interface
* \param[in] Byte Byte to send through the SPI interface
*/
static inline void SPI_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
static inline void SPI_SendByte(const uint8_t Byte)
......
LUFA/Drivers/USB/Class/Device/CDC.h
View file @ 328ed71c
......@@ -206,9 +206,9 @@
* \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or
* the call will fail.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
* \param[in] Data Pointer to the string to send to the host
* \param[in] Length Size in bytes of the string to send to the host
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
* \param[in] Data Pointer to the string to send to the host
* \param[in] Length Size in bytes of the string to send to the host
*
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum
*/
......@@ -224,7 +224,7 @@
* the call will fail.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
* \param[in] Data Byte of data to send to the host
* \param[in] Data Byte of data to send to the host
*
* \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum
*/
......@@ -290,7 +290,7 @@
* to the given CDC interface.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
* \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
* \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
*/
void CDC_Device_CreateStream(USB_ClassInfo_CDC_Device_t* CDCInterfaceInfo, FILE* Stream);
......@@ -298,7 +298,7 @@
* the transfer. While blocking, the USB and CDC service tasks are called repeatedly to maintain USB communications.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
* \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
* \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
*/
void CDC_Device_CreateBlockingStream(USB_ClassInfo_CDC_Device_t* CDCInterfaceInfo, FILE* Stream);
......
LUFA/Drivers/USB/Class/Device/HID.h
View file @ 328ed71c
......@@ -153,12 +153,12 @@
* user is responsible for the creation of the next HID input report to be sent to the host.
*
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class configuration and state
* \param[in,out] ReportID If preset to a non-zero value, this is the report ID being requested by the host. If zero, this should
* be set to the report ID of the generated HID input report (if any). If multiple reports are not sent via the
* given HID interface, this parameter should be ignored.
* \param[in] ReportType Type of HID report to generate, either \ref REPORT_ITEM_TYPE_In or \ref REPORT_ITEM_TYPE_Feature
* \param[out] ReportData Pointer to a buffer where the generated HID report should be stored
* \param[out] ReportSize Number of bytes in the generated input report, or zero if no report is to be sent
* \param[in,out] ReportID If preset to a non-zero value, this is the report ID being requested by the host. If zero,
* this should be set to the report ID of the generated HID input report (if any). If multiple
* reports are not sent via the given HID interface, this parameter should be ignored.
* \param[in] ReportType Type of HID report to generate, either \ref REPORT_ITEM_TYPE_In or \ref REPORT_ITEM_TYPE_Feature
* \param[out] ReportData Pointer to a buffer where the generated HID report should be stored
* \param[out] ReportSize Number of bytes in the generated input report, or zero if no report is to be sent
*
* \return Boolean true to force the sending of the report even if it is identical to the previous report and still within
* the idle period (useful for devices which report relative movement), false otherwise
......@@ -172,11 +172,11 @@
* the user is responsible for the processing of the received HID output report from the host.
*
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class configuration and state
* \param[in] ReportID Report ID of the received output report. If multiple reports are not received via the given HID
* interface, this parameter should be ignored.
* \param[in] ReportType Type of received HID report, either \ref REPORT_ITEM_TYPE_Out or \ref REPORT_ITEM_TYPE_Feature
* \param[in] ReportData Pointer to a buffer where the received HID report is stored.
* \param[in] ReportSize Size in bytes of the received report from the host.
* \param[in] ReportID Report ID of the received output report. If multiple reports are not received via the given HID
* interface, this parameter should be ignored.
* \param[in] ReportType Type of received HID report, either \ref REPORT_ITEM_TYPE_Out or \ref REPORT_ITEM_TYPE_Feature
* \param[in] ReportData Pointer to a buffer where the received HID report is stored.
* \param[in] ReportSize Size in bytes of the received report from the host.
*/
void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, const uint8_t ReportID,
const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize) ATTR_NON_NULL_PTR_ARG(1)
......
LUFA/Drivers/USB/Class/Device/MIDI.h
View file @ 328ed71c
......@@ -120,7 +120,7 @@
* the call will fail.
*
* \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state
* \param[in] Event Pointer to a populated USB_MIDI_EventPacket_t structure containing the MIDI event to send
* \param[in] Event Pointer to a populated USB_MIDI_EventPacket_t structure containing the MIDI event to send
*
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum
*/
......@@ -144,7 +144,7 @@
* the call will fail.
*
* \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state
* \param[out] Event Pointer to a USB_MIDI_EventPacket_t structure where the received MIDI event is to be placed
* \param[out] Event Pointer to a USB_MIDI_EventPacket_t structure where the received MIDI event is to be placed
*
* \return Boolean true if a MIDI event packet was received, false otherwise
*/
......
LUFA/Drivers/USB/Class/Host/CDC.h
View file @ 328ed71c
......@@ -161,9 +161,9 @@
* This should be called once after the stack has enumerated the attached device, while the host state machine is in
* the Addressed state.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing an CDC Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing an CDC Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
*
* \return A value from the \ref CDCHost_EnumerationFailure_ErrorCodes_t enum
*/
......@@ -209,8 +209,8 @@
* call will fail.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state
* \param[in] Data Pointer to the string to send to the device
* \param[in] Length Size in bytes of the string to send to the device
* \param[in] Data Pointer to the string to send to the device
* \param[in] Length Size in bytes of the string to send to the device
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/
......@@ -226,7 +226,7 @@
* call will fail.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state
* \param[in] Data Byte of data to send to the device
* \param[in] Data Byte of data to send to the device
*
* \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum
*/
......@@ -275,7 +275,7 @@
* to the given CDC interface.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
* \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
* \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
*/
void CDC_Host_CreateStream(USB_ClassInfo_CDC_Host_t* CDCInterfaceInfo, FILE* Stream);
......@@ -283,7 +283,7 @@
* the transfer. While blocking, the USB and CDC service tasks are called repeatedly to maintain USB communications.
*
* \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state
* \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
* \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed
*/
void CDC_Host_CreateBlockingStream(USB_ClassInfo_CDC_Host_t* CDCInterfaceInfo, FILE* Stream);
......
LUFA/Drivers/USB/Class/Host/HID.h
View file @ 328ed71c
......@@ -155,9 +155,9 @@
* \note Once the device pipes are configured, the HID device's reporting protocol <b>must</b> be set via a call
* to either the \ref HID_Host_SetBootProtocol() or \ref HID_Host_SetReportProtocol() function.
*
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
*
* \return A value from the \ref HIDHost_EnumerationFailure_ErrorCodes_t enum
*/
......@@ -175,7 +175,7 @@
* can generate.
*
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
* \param[in] Buffer Buffer to store the received report into
* \param[in] Buffer Buffer to store the received report into
*
* \return An error code from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/
......@@ -192,8 +192,8 @@
* \note When the HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method is unavailable.
*
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
* \param[in] ReportID Report ID of the received report if ControlRequest is false, set by the to the Report ID to fetch
* \param[in] Buffer Buffer to store the received report into
* \param[in] ReportID Report ID of the received report if ControlRequest is false, set by the to the Report ID to fetch
* \param[in] Buffer Buffer to store the received report into
*
* \return A value from the \ref USB_Host_SendControlErrorCodes_t enum
*/
......@@ -212,10 +212,10 @@
* from the parameter list of this function.
*
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
* \param[in] ReportID Report ID of the report to send to the device, or 0 if the device does not use report IDs
* \param[in] ReportType Type of report to issue to the device, either \ref REPORT_ITEM_TYPE_Out or \ref REPORT_ITEM_TYPE_Feature
* \param[in] Buffer Buffer containing the report to send to the attached device
* \param[in] ReportSize Report size in bytes to send to the attached device
* \param[in] ReportID Report ID of the report to send to the device, or 0 if the device does not use report IDs
* \param[in] ReportType Type of report to issue to the device, either \ref REPORT_ITEM_TYPE_Out or \ref REPORT_ITEM_TYPE_Feature
* \param[in] Buffer Buffer containing the report to send to the attached device
* \param[in] ReportSize Report size in bytes to send to the attached device
*
* \return An error code from the \ref USB_Host_SendControlErrorCodes_t enum if the DeviceUsesOUTPipe flag is set in
* the interface's state structure, a value from the \ref Pipe_Stream_RW_ErrorCodes_t enum otherwise
......
LUFA/Drivers/USB/Class/Host/HIDParser.h
View file @ 328ed71c
......@@ -134,7 +134,7 @@
* leftwards until the data's sign bit is in the correct position.
*
* \param[in] reportitem HID Report Item whose retrieved value is to be aligned
* \param[in] type Data type to align the HID report item's value to
* \param[in] type Data type to align the HID report item's value to
*
* \return Left-aligned data of the given report item's pre-retrived value for the given datatype
*/
......@@ -272,8 +272,8 @@
/** Function to process a given HID report returned from an attached device, and store it into a given
* \ref HID_ReportInfo_t structure.
*
* \param[in] ReportData Buffer containing the device's HID report table
* \param[in] ReportSize Size in bytes of the HID report table
* \param[in] ReportData Buffer containing the device's HID report table
* \param[in] ReportSize Size in bytes of the HID report table
* \param[out] ParserData Pointer to a \ref HID_ReportInfo_t instance for the parser output
*
* \return A value in the \ref HID_Parse_ErrorCodes_t enum
......@@ -287,7 +287,7 @@
* When called, this copies the report item's Value element to it's PreviousValue element for easy
* checking to see if an item's value has changed before processing a report.
*
* \param[in] ReportData Buffer containing an IN or FEATURE report from an attached device
* \param[in] ReportData Buffer containing an IN or FEATURE report from an attached device
* \param[in,out] ReportItem Pointer to the report item of interest in a \ref HID_ReportInfo_t ReportItem array
*
* \returns Boolean true if the item to retrieve was located in the given report, false otherwise
......@@ -306,7 +306,7 @@
* If the device has multiple HID reports, the first byte in the report is set to the report ID of the given item.
*
* \param[out] ReportData Buffer holding the current OUT or FEATURE report data
* \param[in] ReportItem Pointer to the report item of interest in a \ref HID_ReportInfo_t ReportItem array
* \param[in] ReportItem Pointer to the report item of interest in a \ref HID_ReportInfo_t ReportItem array
*/
void USB_SetHIDReportItemInfo(uint8_t* ReportData, HID_ReportItem_t* const ReportItem)
ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
......@@ -314,7 +314,7 @@
/** Retrieves the size of a given HID report in bytes from it's Report ID.
*
* \param[in] ParserData Pointer to a \ref HID_ReportInfo_t instance containing the parser output
* \param[in] ReportID Report ID of the report whose size is to be retrieved
* \param[in] ReportID Report ID of the report whose size is to be retrieved
* \param[in] ReportType Type of the report whose size is to be determined, a valued from the
* \ref HID_ReportItemTypes_t enum
*
......
LUFA/Drivers/USB/Class/Host/MIDI.h
View file @ 328ed71c
......@@ -119,9 +119,9 @@
* This should be called once after the stack has enumerated the attached device, while the host state machine is in
* the Addressed state.
*
* \param[in,out] MIDIInterfaceInfo Pointer to a structure containing an MIDI Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
* \param[in,out] MIDIInterfaceInfo Pointer to a structure containing an MIDI Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
*
* \return A value from the \ref MIDIHost_EnumerationFailure_ErrorCodes_t enum
*/
......@@ -134,7 +134,7 @@
* call will fail.
*
* \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state
* \param[in] Event Pointer to a populated USB_MIDI_EventPacket_t structure containing the MIDI event to send
* \param[in] Event Pointer to a populated USB_MIDI_EventPacket_t structure containing the MIDI event to send
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/
......@@ -158,7 +158,7 @@
* call will fail.
*
* \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state
* \param[out] Event Pointer to a USB_MIDI_EventPacket_t structure where the received MIDI event is to be placed
* \param[out] Event Pointer to a USB_MIDI_EventPacket_t structure where the received MIDI event is to be placed
*
* \return Boolean true if a MIDI event packet was received, false otherwise
*/
......
LUFA/Drivers/USB/Class/Host/MassStorage.h
View file @ 328ed71c
......@@ -137,9 +137,9 @@
* is found within the device. This should be called once after the stack has enumerated the attached device, while
* the host state machine is in the Addressed state.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing an MS Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
* \param[in,out] MSInterfaceInfo Pointer to a structure containing an MS Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
*
* \return A value from the \ref MSHost_EnumerationFailure_ErrorCodes_t enum
*/
......@@ -164,7 +164,7 @@
* if the device STALLs the request.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
* \param[out] MaxLUNIndex Pointer to a location where the highest LUN index value should be stored
* \param[out] MaxLUNIndex Pointer to a location where the highest LUN index value should be stored
*
* \return A value from the \ref USB_Host_SendControlErrorCodes_t enum
*/
......@@ -178,8 +178,8 @@
* call will fail.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[out] InquiryData Location where the read inquiry data should be stored
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[out] InquiryData Location where the read inquiry data should be stored
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED
*/
......@@ -190,7 +190,7 @@
/** Sends a TEST UNIT READY command to the device, to determine if it is ready to accept other SCSI commands.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[in] LUNIndex LUN index within the device the command is being issued to
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
*/
......@@ -203,8 +203,8 @@
* call will fail.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[out] DeviceCapacity Pointer to the location where the capacity information should be stored
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[out] DeviceCapacity Pointer to the location where the capacity information should be stored
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
*/
......@@ -219,8 +219,8 @@
* call will fail.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[out] SenseData Pointer to the location where the sense information should be stored
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[out] SenseData Pointer to the location where the sense information should be stored
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
*/
......@@ -235,8 +235,8 @@
* call will fail.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[in] PreventRemoval Boolean true if the device should be locked from removal, false otherwise
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[in] PreventRemoval Boolean true if the device should be locked from removal, false otherwise
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
*/
......@@ -249,11 +249,11 @@
* call will fail.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[in] BlockAddress Starting block address within the device to read from
* \param[in] Blocks Total number of blocks to read
* \param[in] BlockSize Size in bytes of each block within the device
* \param[out] BlockBuffer Pointer to where the read data from the device should be stored
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[in] BlockAddress Starting block address within the device to read from
* \param[in] Blocks Total number of blocks to read
* \param[in] BlockSize Size in bytes of each block within the device
* \param[out] BlockBuffer Pointer to where the read data from the device should be stored
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
*/
......@@ -267,11 +267,11 @@
* call will fail.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[in] BlockAddress Starting block address within the device to write to
* \param[in] Blocks Total number of blocks to read
* \param[in] BlockSize Size in bytes of each block within the device
* \param[in] BlockBuffer Pointer to where the data to write should be sourced from
* \param[in] LUNIndex LUN index within the device the command is being issued to
* \param[in] BlockAddress Starting block address within the device to write to
* \param[in] Blocks Total number of blocks to read
* \param[in] BlockSize Size in bytes of each block within the device
* \param[in] BlockBuffer Pointer to where the data to write should be sourced from
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready
*/
......
LUFA/Drivers/USB/Class/Host/Printer.h
View file @ 328ed71c
......@@ -120,9 +120,9 @@
* the device. This should be called once after the stack has enumerated the attached device, while the host state
* machine is in the Addressed state.
*
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
*
* \return A value from the \ref PRNTHost_EnumerationFailure_ErrorCodes_t enum
*/
......@@ -142,7 +142,7 @@
* PRNT_PORTSTATUS_* macros to determine the printer port's status.
*
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state
* \param[out] PortStatus Location where the retrieved port status should be stored
* \param[out] PortStatus Location where the retrieved port status should be stored
*
* \return A value from the \ref USB_Host_SendControlErrorCodes_t enum
*/
......@@ -165,8 +165,8 @@
* call will fail.
*
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state
* \param[in] PrinterCommands Pointer to a buffer containing the raw command stream to send to the printer
* \param[in] CommandSize Size in bytes of the command stream to be sent
* \param[in] PrinterCommands Pointer to a buffer containing the raw command stream to send to the printer
* \param[in] CommandSize Size in bytes of the command stream to be sent
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/
......@@ -181,8 +181,8 @@
* This string, when supported, contains the model, manufacturer and acceptable printer languages for the attached device.
*
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state
* \param[out] DeviceIDString Pointer to a buffer where the Device ID string should be stored, in ASCII format
* \param[in] BufferSize Size in bytes of the buffer allocated for the Device ID string
* \param[out] DeviceIDString Pointer to a buffer where the Device ID string should be stored, in ASCII format
* \param[in] BufferSize Size in bytes of the buffer allocated for the Device ID string
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/
......
LUFA/Drivers/USB/Class/Host/RNDIS.h
View file @ 328ed71c
......@@ -138,9 +138,9 @@
* This should be called once after the stack has enumerated the attached device, while the host state machine is in
* the Addressed state.
*
* \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
* \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
*
* \return A value from the \ref RNDISHost_EnumerationFailure_ErrorCodes_t enum
*/
......@@ -170,9 +170,9 @@
/** Sets a given RNDIS property of an attached RNDIS device.
*
* \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state
* \param[in] Oid OID number of the parameter to set
* \param[in] Buffer Pointer to where the property data is to be sourced from
* \param[in] Length Length in bytes of the property data to sent to the device
* \param[in] Oid OID number of the parameter to set
* \param[in] Buffer Pointer to where the property data is to be sourced from
* \param[in] Length Length in bytes of the property data to sent to the device
*
* \return A value from the USB_Host_SendControlErrorCodes_t enum or RNDIS_COMMAND_FAILED if the device returned a
* logical command failure
......@@ -183,9 +183,9 @@
/** Gets a given RNDIS property of an attached RNDIS device.
*
* \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state
* \param[in] Oid OID number of the parameter to get
* \param[in] Buffer Pointer to where the property data is to be written to
* \param[in] MaxLength Length in bytes of the destination buffer size
* \param[in] Oid OID number of the parameter to get
* \param[in] Buffer Pointer to where the property data is to be written to
* \param[in] MaxLength Length in bytes of the destination buffer size
*
* \return A value from the USB_Host_SendControlErrorCodes_t enum or RNDIS_COMMAND_FAILED if the device returned a
* logical command failure
......@@ -212,8 +212,8 @@
* call will fail.
*
* \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state
* \param[out] Buffer Pointer to a buffer where the packer data is to be written to
* \param[out] PacketLength Pointer to where the length in bytes of the read packet is to be stored
* \param[out] Buffer Pointer to a buffer where the packer data is to be written to
* \param[out] PacketLength Pointer to where the length in bytes of the read packet is to be stored
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
......@@ -226,8 +226,8 @@
* call will fail.
*
* \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state
* \param[in] Buffer Pointer to a buffer where the packer data is to be read from
* \param[in] PacketLength Length in bytes of the packet to send
* \param[in] Buffer Pointer to a buffer where the packer data is to be read from
* \param[in] PacketLength Length in bytes of the packet to send
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
*/
......
LUFA/Drivers/USB/Class/Host/StillImage.h
View file @ 328ed71c
......@@ -134,9 +134,9 @@
* found within the device. This should be called once after the stack has enumerated the attached device, while
* the host state machine is in the Addressed state.
*
* \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
* \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
*
* \return A value from the \ref SIHost_EnumerationFailure_ErrorCodes_t enum
*/
......@@ -176,7 +176,7 @@
* call will fail.
*
* \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state
* \param[in] PIMAHeader Pointer to a PIMA container structure that is to be sent
* \param[in] PIMAHeader Pointer to a PIMA container structure that is to be sent
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/
......@@ -189,7 +189,7 @@
* call will fail.
*
* \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state
* \param[out] PIMAHeader Pointer to a PIMA container structure where the received block is to be stored
* \param[out] PIMAHeader Pointer to a PIMA container structure where the received block is to be stored
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/
......@@ -201,9 +201,9 @@
* call will fail.
*
* \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state
* \param[in] Operation PIMA operation code to issue to the device
* \param[in] TotalParams Total number of 32-bit parameters to send to the device in the issued command block
* \param[in] Params Pointer to an array of 32-bit values containing the parameters to send in the command block
* \param[in] Operation PIMA operation code to issue to the device
* \param[in] TotalParams Total number of 32-bit parameters to send to the device in the issued command block
* \param[in] Params Pointer to an array of 32-bit values containing the parameters to send in the command block
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum, or \ref SI_ERROR_LOGICAL_CMD_FAILED if the device
* returned a logical command failure
......@@ -241,7 +241,7 @@
* call will fail.
*
* \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state
* \param[out] PIMAHeader Pointer to a PIMA container structure where the event should be stored
* \param[out] PIMAHeader Pointer to a PIMA container structure where the event should be stored
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum, or \ref SI_ERROR_LOGICAL_CMD_FAILED if the device
* returned a logical command failure
......@@ -257,8 +257,8 @@
* call will fail.
*
* \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state
* \param[in] Buffer Pointer to a buffer where the data to send has been stored
* \param[in] Bytes Length in bytes of the data in the buffer to send to the attached device
* \param[in] Buffer Pointer to a buffer where the data to send has been stored
* \param[in] Bytes Length in bytes of the data in the buffer to send to the attached device
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/
......@@ -272,8 +272,8 @@
* call will fail.
*
* \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state
* \param[out] Buffer Pointer to a buffer where the received data is to be stored
* \param[in] Bytes Length in bytes of the data to read
* \param[out] Buffer Pointer to a buffer where the received data is to be stored
* \param[in] Bytes Length in bytes of the data to read
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
*/
......
LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h
View file @ 328ed71c
......@@ -134,9 +134,9 @@
*
* \note This function is available in USB Host mode only.
*
* \param[in,out] BytesRem Pointer to an int storing the remaining bytes in the configuration descriptor
* \param[in,out] CurrConfigLoc Pointer to the current position in the configuration descriptor
* \param[in] ComparatorRoutine Name of the comparator search function to use on the configuration descriptor
* \param[in,out] BytesRem Pointer to an int storing the remaining bytes in the configuration descriptor
* \param[in,out] CurrConfigLoc Pointer to the current position in the configuration descriptor
* \param[in] ComparatorRoutine Name of the comparator search function to use on the configuration descriptor
*
* \return Value of one of the members of the \ref DSearch_Comp_Return_ErrorCodes_t enum