Short UUIDs are measured in bytes, not bits -- update Service Discovery...

Short UUIDs are measured in bytes, not bits -- update Service Discovery Protocol code so that it can now correctly match against UUIDs in the service table.

Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h

@@ -55,6 +55,8 @@
 		/** Bluetooth specification defined channel number for connectionless data */
 		#define BT_CHANNEL_CONNECTIONLESS         0x0002
 		
+		#define BT_ACL_FIRST_AUTOFLUSH            (1 << 13)
+
 		#define BT_SIGNAL_COMMAND_REJECT          0x01
 		#define BT_SIGNAL_CONNECTION_REQUEST      0x02
 		#define BT_SIGNAL_CONNECTION_RESPONSE     0x03
@@ -82,9 +84,7 @@
 		#define BT_CONFIGURATION_UNKNOWNOPTIONS   0x0003
 		
 		#define BT_CONFIG_OPTION_MTU              1
-		
-		#define BT_ACL_FIRST_AUTOFLUSH            (1 << 13)
-		
+				
 	/* Type Defines: */
 		/** Bluetooth ACL header structure, common to all ACL data packets. */
 		typedef struct

Demos/Host/Incomplete/BluetoothHost/Lib/ServiceDiscoveryProtocol.c

@@ -76,10 +76,17 @@ const ServiceTable_t SDP_Services_Table[] =
 		},
 	};
 
-/* Base UUID value common to all standardized Bluetooth services */
+/** Base UUID value common to all standardized Bluetooth services */
 const uint8_t BaseUUID[] = {BASE_96BIT_UUID, 0x00, 0x00, 0x00, 0x00};
 
 
+/** Main Service Discovery Protocol packet processing routine. This function processes incomming SDP packets from
+ *  a connected Bluetooth device, and sends back appropriate responses to allow other devices to determine the
+ *  services the local device exposes.
+ *
+ *  \param[in]  Data     Incomming packet data containing the SDP request
+ *  \param[in]  Channel  Channel the request was issued to by the remote device
+ */
 void ServiceDiscovery_ProcessPacket(void* Data, Bluetooth_Channel_t* Channel)
 {
 	SDP_PDUHeader_t* SDPHeader = (SDP_PDUHeader_t*)Data;
@@ -209,7 +216,7 @@ static uint8_t ServiceDiscovery_GetUUIDList(uint8_t UUIDList[][UUID_SIZE_BYTES],
 		uint8_t  UUIDLength  = ServiceDiscovery_GetDataElementSize(CurrentParameter, &ElementHeaderSize);
 		
 		memcpy(CurrentUUID, BaseUUID, sizeof(BaseUUID));
-		memcpy(&CurrentUUID[(UUIDLength <= 32) ? (sizeof(BaseUUID) - 32) : 0], *CurrentParameter, UUIDLength);
+		memcpy(&CurrentUUID[(UUIDLength <= 4) ? (UUID_SIZE_BYTES - 4) : 0], *CurrentParameter, UUIDLength);
 		
 		BT_SDP_DEBUG(2, "-- UUID (%d): 0x%02X%02X%02X%02X-%02X%02X-%02X%02X-%02X%02X-%02X%02X%02X%02X%02X%02X",
 		                UUIDLength,

Demos/Host/Incomplete/BluetoothHost/Lib/ServiceDiscoveryProtocol.h

@@ -59,7 +59,10 @@
 		#define SDP_ATTRIBUTE_PROVIDER                  0x0002
 		#define SDP_ATTRIBUTE_AVAILABILITY              0x0008
 		
+		/** Size of a full 128 bit UUID, in bytes */
 		#define UUID_SIZE_BYTES                         16
+		
+		/** First 96 bits common to all standadized Bluetooth services */
 		#define BASE_96BIT_UUID                         0xFB, 0x34, 0x9B, 0x5F, 0x80, 0x00, 0x00, 0x80, 0x00, 0x10, 0x00, 0x00
 		
 		/** Defines a service attribute as a string of characters.
@@ -97,7 +100,7 @@
 		 *  \param ...     Data to associate with the attribute
 		 */
 		#define SERVICE_ATTRIBUTE_LEN32(name, type, size, ...) const ServiceAttributeData32Bit_t name PROGMEM = \
-		                                                {.Header = (type | 7), .Size = size, .Data = __VA_ARGS__}
+		                                                       {.Header = (type | 7), .Size = size, .Data = __VA_ARGS__}
 
 		/** Terminator for a service attribute table of type \ref ServiceAttributeTable_t. */
 		#define SERVICE_ATTRIBUTE_TABLE_TERMINATOR      {.Data = NULL}

Projects/AVRISP-MKII/AVRISP.txt

@@ -115,7 +115,7 @@
  *  <b><sup>2</sup></b> <i>See AUX line related tokens in the \ref SSec_Options section</i>
  *
  *  \section Sec_PDI PDI Connections
- *  Connections to the device for PDI programming<b><sup>1</sup></b> (when enabled):
+ *  Connections to the device for PDI programming (when enabled):
  *
  *  <table>
  *   <tr>
@@ -159,7 +159,7 @@
  *  <b><sup>2</sup></b> <i>The AVR's Tx and Rx become the DATA line when connected together via a pair of 220 ohm resistors</i> \n
  *
  *  \section Sec_TPI TPI Connections
- *  Connections to the device for TPI programming<b><sup>1</sup></b> (when enabled):
+ *  Connections to the device for TPI programming (when enabled):
  *
  *  <table>
  *   <tr>
@@ -241,7 +241,8 @@
  *   <tr>
  *    <td>VTARGET_ADC_CHANNEL</td>
  *    <td>Makefile CDEFS</td>
- *    <td>ADC channel number (on supported AVRs) to use for VTARGET level detection, if NO_VTARGET_DETECT is not defined.</td> 
+ *    <td>ADC channel number (on supported AVRs) to use for VTARGET level detection, if NO_VTARGET_DETECT is not defined.
+ *        <i>Ignored when compiled for targets lacking an ADC.</i></td> 
  *   </tr>
  *   <tr>
  *    <td>ENABLE_ISP_PROTOCOL</td>
@@ -257,7 +258,8 @@
  *    <td>NO_VTARGET_DETECT</td>
  *    <td>Makefile CDEFS</td>
  *    <td>Define to disable VTARGET sampling and reporting on AVR models with an ADC converter. This will cause the programmer
- *        to report a fixed 5V target voltage to the host regardless of the real target voltage.</td>  
+ *        to report a fixed 5V target voltage to the host regardless of the real target voltage. <i>Ignored when compiled for
+ *        targets lacking an ADC.</i></td>  
  *   </tr>
  *   <tr>
  *    <td>LIBUSB_DRIVER_COMPAT</td>