Commit 48b3c997 authored by Dean Camera's avatar Dean Camera
Browse files

Use sub pages in main library documentation to improve readability.

parent b61049f7
This diff is collapsed.
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/**
* \page Page_AboutLUFA About LUFA
*
* This section of the manual contains information about the library as a whole, including its supported targets,
* past and planned changes, and links to other projects incorporating LUFA.
*
* <b>Subsections:</b>
* - \subpage Page_DeviceSupport Current Device and Hardware Support
* - \subpage Page_Resources LUFA and USB Related Resources
* - \subpage Page_ChangeLog Project Changelog
* - \subpage Page_FutureChanges Planned Changes to the Library
* - \subpage Page_LUFAPoweredProjects Other Projects Using LUFA
*/
\ No newline at end of file
......@@ -12,8 +12,8 @@
* - Added new class drivers and matching demos to the library for rapid application development
* - Added incomplete device and host mode demos for later enhancement
* - Changed bootloaders to use FLASHEND rather than the existence of RAMPZ to determine if far FLASH pointers are needed
* - Error status LEDs shown when device endpoint configuration fails to complete
* - MIDI device demo no longer blocks if a note change event is sent while the endpoint is not ready
* - Error status LEDs shown when device endpoint configuration fails to complete in all demos and projects
* - Low level API MIDI device demo no longer blocks if a note change event is sent while the endpoint is not ready
* - Fixes to MassStorageHost for better device compatibility (increase command timeout, change MassStore_WaitForDataReceived()
* to only unfreeze and check one data pipe at a time)
* - Internal per-device preprocessing conditions changed to per-device series rather than per controller group for finer-grain
......
......@@ -4,7 +4,7 @@
* documentation pages. It is not a project source file.
*/
/** \page TokenSummary Summary of Compile Tokens
/** \page Page_TokenSummary Summary of Compile Tokens
*
* The following lists all the possible tokens which can be defined in a project makefile, and passed to the
* compiler via the -D switch, to alter the LUFA library code. These tokens may alter the library behaviour,
......
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/**
* \page Page_DevelopingWithLUFA Developing With LUFA
*
* \subpage Page_BuildLibrary
* \subpage Page_TokenSummary
* \subpage Page_GettingStarted
* \subpage Page_Migration
* \subpage Page_VIDPID
* \subpage Page_WritingBoardDrivers
*/
\ No newline at end of file
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/**
* \page Page_DevelopingWithLUFA Developing With LUFA
*
* This section of the manual contains information on LUFA development, such as Getting Started information,
* information on compile-time tuning of the library and other developer-related sections.
*
* <b>Subsections:</b>
* - \subpage Page_GettingStarted Getting Started
* - \subpage Page_TokenSummary Summary of Compile Time Tokens
* - \subpage Page_Migration Migrating from an Older LUFA Version
* - \subpage Page_VIDPID Allocated USB VID and PID Values
* - \subpage Page_BuildLibrary Building as a Linkable Library
* - \subpage Page_WritingBoardDrivers How to Write Custom Board Drivers
*/
\ No newline at end of file
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/**
* \page Page_DeviceSupport Device and Hardware Support
*
* Currently supported AVR models:
* - AT90USB1286 (USB Device Only)
* - AT90USB1287 (USB Host and Device)
* - AT90USB646 (USB Device Only)
* - AT90USB647 (USB Host and Device)
* - AT90USB82 (USB Device Only)
* - AT90USB162 (USB Device Only)
* - ATMEGA16U4 (USB Device Only)
* - ATMEGA32U4 (USB Device Only)
* - ATMEGA32U6 (USB Device Only)
*
* Currently supported Atmel boards:
* - AT90USBKEY
* - STK525
* - STK526
* - RZUSBSTICK
* - ATAVRUSBRF01
* - Custom User Boards
*/
\ No newline at end of file
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/**
* \page Page_Donating Donating to Support This Project
*
* I am a 20 year old University student studying for a double degree in Computer Science and Electronics Engineering.
* The development and support of this library requires much effort from myself, as I am the sole developer, maintainer
* and supporter. Please consider donating a small amount to support this and my future Open Source projects - All
* donations are <i>greatly</i> appreciated.
*
* <b>Donate to this project at http://www.fourwalledcubicle.com </b> via PayPal - Thanks in Advance!
*/
\ No newline at end of file
......@@ -25,7 +25,7 @@ DOXYFILE_ENCODING = UTF-8
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
# by quotes) that should identify the project.
PROJECT_NAME = "LUFA Library"
PROJECT_NAME = "LUFA (Formerly MyUSB) Library"
# The PROJECT_NUMBER tag can be used to enter a project or revision number.
# This could be handy for archiving the generated documentation or
......
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/**
* \page Page_Resources Library Resources
*
* Project Homepage: http://www.fourwalledcubicle.com/LUFA.php \n
* Development Blog: http://www.fourwalledcubicle.com/blog \n
* Discussion Group: http://groups.google.com/group/myusb-support-list \n
* SVN Access, Bug Reports and Feature Requests: http://code.google.com/p/lufa-lib/ \n
* Author's Website: http://www.fourwalledcubicle.com \n
*
* WinAVR Website: http://winavr.sourceforge.net \n
* avr-libc Website: http://www.nongnu.org/avr-libc/ \n
*
* USB-IF Website: http://www.usb.org \n
*/
\ No newline at end of file
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/**
* \page Page_Licence License
*
* The LUFA library is currently released under the MIT licence, included below.
*
* Commercial entities can opt out of the public disclosure clause in this license
* for a one-time US$1500 payment. This provides a non-exclusive modified MIT licensed which
* allows for the free use of the LUFA library, bootloaders and (where the sole copyright
* is attributed to Dean Camera) demos without public disclosure within an organisation. Please
* contact the author for more information.
*
* \verbatim
* Permission to use, copy, modify, and distribute this software
* and its documentation for any purpose and without fee is hereby
* granted, provided that the above copyright notice appear in all
* copies and that both that the copyright notice and this
* permission notice and warranty disclaimer appear in supporting
* documentation, and that the name of the author not be used in
* advertising or publicity pertaining to distribution of the
* software without specific, written prior permission.
*
* The author disclaim all warranties with regard to this
* software, including all implied warranties of merchantability
* and fitness. In no event shall the author be liable for any
* special, indirect or consequential damages or any damages
* whatsoever resulting from loss of use, data or profits, whether
* in an action of contract, negligence or other tortious action,
* arising out of or in connection with the use or performance of
* this software.
* \endverbatim
*/
......@@ -5,33 +5,12 @@
*/
/**
* \mainpage About the LUFA (Formerly MyUSB) Library
* \mainpage General Information
*
* Lightweight USB Framework for AVRs Library, written by Dean Camera.
* Lightweight USB Framework for AVRs Library, written by Dean Camera.
*
* \section Sec_About About this library
*
* Originally based on the AT90USBKEY from Atmel, it is an open-source, driver for the USB-enabled AVR
* microcontrollers, released under the MIT license.
*
* Currently supported AVR models:
* - AT90USB1286 (USB Device Only)
* - AT90USB1287 (USB Host and Device)
* - AT90USB646 (USB Device Only)
* - AT90USB647 (USB Host and Device)
* - AT90USB82 (USB Device Only)
* - AT90USB162 (USB Device Only)
* - ATMEGA16U4 (USB Device Only)
* - ATMEGA32U4 (USB Device Only)
* - ATMEGA32U6 (USB Device Only)
*
* Currently supported Atmel boards:
* - AT90USBKEY
* - STK525
* - STK526
* - RZUSBSTICK
* - ATAVRUSBRF01
* - Custom User Boards
* Originally based on the AT90USBKEY from Atmel, it is an open-source USB library for the USB-enabled AVR
* microcontrollers, released under the MIT license. It now supports a large number of USB AVR models and boards.
*
* The library is currently in a stable release, suitable for download and incorporation into user projects for
* both host and device modes. For information about the project progression, check out my blog.
......@@ -40,50 +19,6 @@
* library API more streamlined and robust. You can download AVR-GCC for free in a convenient windows package,
* from the the WinAVR website.
*
*
* \section Sec_Links Library Links
* Project Homepage: http://www.fourwalledcubicle.com/LUFA.php \n
* Development Blog: http://www.fourwalledcubicle.com/blog \n
* Discussion Group: http://groups.google.com/group/myusb-support-list \n
* SVN Access, Bug Reports and Feature Requests: http://code.google.com/p/lufa-lib/ \n
* Author's Website: http://www.fourwalledcubicle.com \n
*
* WinAVR Website: http://winavr.sourceforge.net \n
* avr-libc Website: http://www.nongnu.org/avr-libc/ \n
*
* USB-IF Website: http://www.usb.org \n
*
*
* \section Sec_License License
* The LUFA library is currently released under the MIT licence, included below.
*
* Commercial entities can opt out of the public disclosure clause in this license
* for a one-time US$1500 payment. This provides a non-exclusive modified MIT licensed which
* allows for the free use of the LUFA library, bootloaders and (where the sole copyright
* is attributed to Dean Camera) demos without public disclosure within an organisation. Please
* contact the author for more information.
*
* \verbatim
* Permission to use, copy, modify, and distribute this software
* and its documentation for any purpose and without fee is hereby
* granted, provided that the above copyright notice appear in all
* copies and that both that the copyright notice and this
* permission notice and warranty disclaimer appear in supporting
* documentation, and that the name of the author not be used in
* advertising or publicity pertaining to distribution of the
* software without specific, written prior permission.
*
* The author disclaim all warranties with regard to this
* software, including all implied warranties of merchantability
* and fitness. In no event shall the author be liable for any
* special, indirect or consequential damages or any damages
* whatsoever resulting from loss of use, data or profits, whether
* in an action of contract, negligence or other tortious action,
* arising out of or in connection with the use or performance of
* this software.
* \endverbatim
*
*
* \section Sec_Demos Demos and Bootloaders
* The LUFA library ships with several different host and device demos, located in the /Demos/ subdirectory.
* If this directory is missing, please re-download the project from the project homepage.
......@@ -93,11 +28,7 @@
* CDC class (AVR109 protocol) is compatible with such open source software as AVRDUDE and AVR-OSP, and the TeensyLoader
* HID class bootloader is compatible with the software from PJRC (http://www.pjrc.com/teensy/index.html).
*
*
* \section Sec_Donations Donate
* I am a 20 year old University student studying for a double degree in Computer Science and Electronics Engineering.
* The development and support of this library requires much effort from myself. Please consider donating a small amount
* to myself to support this and my future Open Source projects. You can donate any amount via PayPal on my website,
* http://www.fourwalledcubicle.com . All donations are greatly appreciated.
* <b>Subsections:</b>
* - \subpage Page_Licence Project License
* - \subpage Page_Donating Donating to Support this Project
*/
_ _ _ ___ _
| | | | | __/ \
| |_| U | _| o | - The Lightweight USB
|___|___|_||_n_| Framework for AVRs
=========================================
Written by Dean Camera
http://www.fourwalledcubicle.com
=========================================
This package contains the complete LUFA library, demos, user-submitted projects
and bootloaders for use with compatible microcontroller models. To get started,
you will need to install the "Doxygen" documentation generation tool from
www.doxygen.org, and run "make doxygen" from the command line. From there, the
generated HTML documentation for the library itself will be avaliable in the
LUFA/Documentation/html/ directory. View this documentation in your chosen web
browser for further Getting Started information.
The documentation for the library itself (but not the documentation for the
individual demos, projects or bootloaders) is also available as a seperate
package from the project webpage for convenience if Doxygen cannot be installed.
\ No newline at end of file
......@@ -9,8 +9,9 @@
# Makefile to build the LUFA library and Demos.
# Call with "make all" to rebuild everything, "make clean" to clean everything,
# "make clean_list" to remove all intermediatary files but preserve any binaries
# and "make doxygen" to document the project with DoxyGen (if installed).
# "make clean_list" to remove all intermediatary files but preserve any binaries,
# "make doxygen" to document the library/demos/etc. with DoxyGen (if installed) and
# "make clean_doxygen" to remove generated Doxygen documentation.
# It is suggested that for the master build, the --quiet switch is passed to make,
# to remove all the commands from the output. This gives a much easier to read
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment